uPVC Spraying - KolorBond - Aquatek

uPVC spraying using Kolorbond Aquatek. This Kolorbond for uPVC is water based.
uPVC spraying is very popular.
Let me show you Kolorbond paint used in a HVLP QT5.
uPVC spraying, from the prep needed to actually spaying UPVC with Kolorbond aquatek using the QT5.
Buy Kolorbomd direct from Kolorbond..
www.kolorbond.co.uk
As said in the video, big thanks go out to Trent Valley Windows for giving me the sample uPVC window which they were going to put in the skip.
Ideal for me to use as a sample uPVC window to spray with Kolorbond.
TRENT VALLEY WINDOWS check them out.
www.trentvalleywindows.co.uk
facebook...
trentvalleywindowsltd
M D Beckwith Decorators are now on Instagram, follow us / beckwithdec. .

[@tristancraven3685]

When Ricky Gervais paints his windows . Forget the office this guys even funnier in this sketch .

[@Colwray1]

I’ve used Kolorbond several times… brilliant paint never had an issue staying this and it never fails and sticks like shit!! The finish is far superior to some of these crappy spray jobs use see where they do zero prep , bang it on and bugger … cowboys !

[@ProfessionalPainterDecorator]

You use the aquatek?

[@Colwray1]

Yes and like you did the full clean etc .. changed from light brown recently to dark anthracite grey.. did 6 windows and facias and a brick door surround with it (undercoated first) .. never had a problem finish as you say is great… and by the time I’ve done the second window I just go back to the first and so on 😁 ​@@ProfessionalPainterDecorator

[@miker8149]

Thanks, it will def be interesting to see how Auatek stands up, I must get into spraying👍👍

[@ProfessionalPainterDecorator]

You should!

[@giuseppecimino6172]

Hello Phil enjoy your videos, my only criticism is you repeat yourself too many times keep up the good work from a fellow professional decorator

[@ProfessionalPainterDecorator]

lol, it's so it sinks in ;) like being at school lol

[@richardbriggs4042]

I use aquatec spraying it I’ve used it for internal an exterior window and kitchens an wide range of other things all my samples windows an melamine board r still goin strong amazing drop of paint when preped properly an sprayed with 10%water an correct drying time an good gun it’s solid. Simon is a lovely an if ya have a problem I phone him he will give you the correct advice

[@ProfessionalPainterDecorator]

weird this after three months still came off easy with my finger nail :(

[@_lmagine]

​@@ProfessionalPainterDecoratordid you ever get to the bottom of the problem?

[@victorgiuliani524]

Great video once again 👍

[@ProfessionalPainterDecorator]

Glad you enjoyed it

[@andymcintosh5324]

great video, what spraying equpment are you using pal

[@ProfessionalPainterDecorator]

LoL. Have you watched the video?

[@flawlessspraylimited]

Nice job mate 👌

[@jeffbruce1050]

Hi Phil Going to spray some window frames with the Kolorbond original What masking tape would you recommend Thought either orange frog tape or tesa outdoor blue Also what to clean the gun out with Jeff

[@ProfessionalPainterDecorator]

Hi Jeff, have you watched the uPVC door spraying, it shows you washing the kit out. Tape... for brick.. Masq RED tape, Glass.. I use the precision 'orange' Q1 tape... general I use the q1 'yellow' tape

[@jeffbruce1050]

@@ProfessionalPainterDecorator What about the tape on the black rubber gaskets Phil Jeff

[@ProfessionalPainterDecorator]

what about it? do you mean, taping them up? YOu can go over them with kolour bond

[@jeffbruce1050]

@@ProfessionalPainterDecorator Hi Phil Yes meant taping them up Didn’t know the rubber could be painted, thought it would peel off Cheers mate Love the vids by the way

[@dustyfruitypie1633]

Do you mask the black rubber seals as well or paint them as well?

[@ProfessionalPainterDecorator]

I thought I covered that on the video?

[@ProfessionalPainterDecorator]

KolorBond you can go over the rubber. If you feel the erge to carefully tape the rubbers feel free ;)

[@daveoconnor5084]

Hi Phil, just wondering if you have details of the respirator/ mask you use, please.

[@ProfessionalPainterDecorator]

oh yes.. there's a video I've doneon that... have you found it yet..?

[@daveoconnor5084]

@@ProfessionalPainterDecorator I'm looking now👍

[@geoffcooper5639]

New to Hvlp spraying… Ive just started experimenting with a Fuji Q5… you mention in your Video applying a dust coat first.…and not over-atomizing the spray… what would be a good sign the finish is atomizing correctly. Cheers

[@ProfessionalPainterDecorator]

Get some Card and alter paint flow and air flow, see how it makes the spray different. Too much paint with not enough air will splatter. Too much air and not enough paint will makes it go all misty and weak as a finish. Start with full air, then reduce till you get a nice spray fan pattern. Getting a dust/mist coat to start with.. just reduce down the paint flow so not so much gets applied.

[@geoffcooper5639]

Cheers I'll give it a go👍

[@simonmorrall-sm9zw]

Have you used this on composite doors? Also would a 1.5 needle handle this paint once thinned down?

[@ProfessionalPainterDecorator]

You can use this on GRP Composite doors. What tip did I use? 1.5 if it's thin enough.

[@mattheweason4168]

Hi mate, I know this is a stupid question. Know when you using 2K can you use it on metal? So I can do my door and garage. Thank

[@ProfessionalPainterDecorator]

think you can. whats on the door now?

[@iris100moon]

Great mate with is the colour code?

[@ProfessionalPainterDecorator]

RAL7016

[@billybarton3258]

Could you do a future video turning the window around and spraying it with a airless sprayer as most DIY people don't have expensive Q5 machine's

[@ProfessionalPainterDecorator]

How about I use a cheap £40 hvlp? Have you seen that video of me trying it out?

[@billybarton3258]

Yes it was a few months ago I think

[@GavinMcC]

Phil do you have a video on the Original? I used the original a few months ago and done a scratch test 3 weeks later and was horrendous. Right back to the white pvc it went.

[@ProfessionalPainterDecorator]

Yeah, a few vids where I used it.. also a vid where I go back to see how it's stood up over 6monthd and a year +

[@ProfessionalPainterDecorator]

kzbin.info/www/bejne/oprXnZeHo72VptE

[@Shortboxing47]

hi paul ive recently started a project on some wardrobes but they to have some sort of plasticy laminate wrapping on them.... ive cleaned them off and i got recomended some 123 primer to put over it and then top coat but once i applied the paint it seems to chip fairly easy..... ive just bought some shellac primer i was wondering if i could go straight over the 123 primer with it? as some of the doors are just in the 123 primer still

[@Shortboxing47]

i feel a bit lost with the project now as i dont know weather i need to strip it all back to the laminate which is a massive job or if i could literally just sand it a bit and go straight over with the shellacbin primer

[@chipmunk176]

@@Shortboxing47 Shellac based finishes will tend to stick to anything other than waxes or oils, just give it a good flatten off and a key and it should be fine, with the laminate wrapping you need to give them a real good key for the paint/finish to adhere because it is so flat so that may be why its coming off easy.

[@ProfessionalPainterDecorator]

zinsser 123 does take a good 7 days to fully cure. keep it on and carry on with the top coats. and don't try and chip it off. ;)

[@Shortboxing47]

@@chipmunk176 ty bro

[@Shortboxing47]

@@ProfessionalPainterDecorator ty phill

[@ConnorFerguson-hv4sg]

Would a 25 litre compressor be okay to use?

[@ProfessionalPainterDecorator]

yep. Id say so.

[@dominicnicholls1593]

hello phil do you have to do a mix ratio with thinners when using kolourbond

[@ProfessionalPainterDecorator]

Hi, no, it was a case of just adding a little bit and seeing how it sprayed and adjusting accordingly. But a splash of water did help the Aqua.