Uragan 2 in 5.5mm Adjusting the Regulator to shoot 40 gn slugs over 1000fps

[@davidberkley839]

Great to see one ya video's Glad ya still kicking Everything you sold me works great !! Thank you my friend!!

[@AfricanAirOrdnance]

All good this side thanks again for your support

[@heithwatkins]

Liked and subscribed. From the USA 🇺🇸

[@AfricanAirOrdnance]

Thank you

[@chrisfigueroa3361]

Awesome video im.going to get thst air gun thanks for sharing bsafe buddy 👍 40 at a 1040 that's some fpe

[@georgealex338]

Great video. Please show us how to adjust hammer spring too.

[@AfricanAirOrdnance]

I will on the next Uragan Video

[@miljanmilivojevic4905]

We are waiting 4 months 😞

[@CenturyTTR]

Excelente video !!!!! Gracias por compartirlo

[@giog1313]

Thanks for the video I just ordered my Vulcan 3 Power kit keep up the good work

[@AfricanAirOrdnance]

Great thanks for the support

[@vincenzopellegrini3580]

​@@AfricanAirOrdnance Buongiorno amico, volevo chiederti 1050 FPS = 22lr Federal punch 29 gr ? Grazie amico queste velocità sono paragonabile a 22 lr da fuoco?

[@JJaailson]

Parabéns pelo vídeo! Essa é melhor que a Vulcan 3? Saudações do Brasil! 🇧🇷

[@Tony-o1b]

That reg is amazing.

[@AfricanAirOrdnance]

Yes it is

[@Oregon-airguns]

You going to make us wait 3 damn days!!! 😂 can’t wait to see how much power you can make with this one!

[@AfricanAirOrdnance]

Yes but it's worth the wait

[@allanmingee9870]

That’s nice power right there,one could even go with a slightly heavier slug if they chose to with the FPS👍🏻

[@AfricanAirOrdnance]

@@allanmingee9870 4 sure you run 45 gn slugs but due to mag constraints single shot

[@allanmingee9870]

@@AfricanAirOrdnance yea for sure😂

[@allanmingee9870]

@@AfricanAirOrdnance good FPE though👍🏻

[@redgum1340]

I'd like to see how these washer less and spring less Reg's work. The velocity consistency is absolutely amazing.

[@cesarferreira6972]

Dear sir, I would like two pieces of information if possible: How many PSI did the regulator have? How many shots can you make with this rifle configuration

[@AfricanAirOrdnance]

@@cesarferreira6972 I believe it was around 200 bar. 40;shots

[@M4rkmcc21]

What colour is the laminate at the start of the vid? I've never seen that as an option for an AGT gun. Lovely grey instantly loved it.

[@AfricanAirOrdnance]

Red but it's a Black and white photo

[@redrover7574]

I am interested in hunting Coyotes out to 85 yds, and I'm wanting to be accurate with a ,30 cal. ( State Law) do you recommend a Vulcan 3 or Uragan 2 or ?

[@AfricanAirOrdnance]

Both can be set up o be as powerful although the Vulcan is slightly more powerful with larger air capacity

[@redrover7574]

@@AfricanAirOrdnance Thanks for the quick response

[@eldairfirmiano7181]

Bar regultor?

[@tshooter4419]

Well done.

[@hossienpakseresht3360]

Hi great as always.I wish you counted the number of shots with each per fill.

[@AfricanAirOrdnance]

After 12 shots 250 bar left in the 530 cc bottle

[@davidvazquez7862]

With the Uragan king that will be perfect at that power level get about 30 regulated shots I gues

[@MrTonioScot]

Would this also apply to the 1st gen uragan?

[@secondfirstsecond]

What else can you adjust other than the regulator? Is hammer spring adjustable externally?

[@AfricanAirOrdnance]

You have to remove the stock kzbin.info/www/bejne/mH6tZJ6vbsaGqNU

[@miljanmilivojevic4905]

Hi there, can you please tell us when will be available abgrade kit and what is the max velocity with 40 grain slug? Thank you in advance. Regards from Serbia!

[@AfricanAirOrdnance]

Uragan kits are available now if you want to order email me [e-mail] kit includes the following O ring kit Biathlon cocking handles color coded so if you have a red stock u get red handles . mag kit. Bottle adapter for aftermarket bottles .hammer weight Magnum Hammer Spring . Regulator removal tool .regulator end cap removal tool

[@calpcp]

I want to order either the vulcan 3 or the uragan 2. The vulcan is more powerfull but the uragan is way more quiet (no ping). Will the adjustments you made do the trick also on the uragan 2 in .30 caliber? I would prefer to get at least 90 fpe with 49.5 gr slugs.

[@AfricanAirOrdnance]

No reason it won't but first check your starting reg pressure and go from there

[@calpcp]

@@AfricanAirOrdnance Thanks, will do 👍

[@weirhauch1002]

Great improvement. Is this the CZ barrel or Alpha ?

[@Oregon-airguns]

Should be CZ however i wish it had the alpha

[@weirhauch1002]

@@Oregon-airguns I saw some groups of Alpha of the first version v3 ,they were amazing

[@Oregon-airguns]

@@weirhauch1002 they’re awesome barrels! Mine consistently Hoovers in that 1nch area at 200 yards, and under an inch at 100 yards. (Clean barrel and decent conditions)

[@kamikazehunter]

Very interesting and good info, thanx. What gun is the best between the Vulcan 3 and Uragan 2?

[@AfricanAirOrdnance]

Vulcan is cheaper with more shots per fill on high power

[@kamikazehunter]

@@AfricanAirOrdnance thanx, mine is actually on the way from the Nederlands. I need to make contact for some upgrade parts..

[@AfricanAirOrdnance]

@@kamikazehunter [e-mail]

[@Manavis36]

only reg? valve adjust its not necessary?

[@AfricanAirOrdnance]

Well you can't adjust the valve only the reg and hammer strike

[@Manavis36]

@@AfricanAirOrdnance yes hummer i mean.. my mistake!!

[@AfricanAirOrdnance]

@@Manavis36 if you are running higher reg pressure over 200 bar then you need more hammer strike to overcome valve lock even a assisted valve will lock if the pressure is high enough and to get high speeds over 1050 FPS with a 40 Gn slug u need those high reg pressure and more hammer strike to get there

[@Manavis36]

@@AfricanAirOrdnance thank you very very much mate!!!!

[@MukhsinBroo]

Good joob 😍

[@redgum1340]

Hello, I have liked and subscribed but if you are not interested in answering my questions, it's all for nothing. I've asked you about the special spring and washer less Reg's but it seems they are a secret and you are not willing to show us how they function and how they are made. May I ask again, can you show us these Reg's? Many thanks

[@AfricanAirOrdnance]

Good Day I will put a video on the Regulator. out when I get some time to do it unfortunately, I'm quite busy at this time.

[@redgum1340]

@@AfricanAirOrdnance Thank you, I'll be looking out for it. Hope we don't need to wait too long 🙂We are so curious as to how these Reg's function. Also, thanks for your reply, it shows respect to the viewers and loyal supporters of your channel.

[@ExplorandoPCPs]

😮😮😮

[@yullex3338]

Hi all, I bought my Uragan2 6.35 barrel 700, they advised me to lap the barrel, can it give optimal results, or can it give negative results? thanks whoever answers me

[@AfricanAirOrdnance]

Google diamond paste put some in a plastic bag then put about 50 Slugs in mix them in the diamond paste the go shoot them through your gun

[@redgum1340]

@@AfricanAirOrdnance What grit do you suggest?

[@zuheirchami4034]

Hi mate if I make test for Regulator what a number do I put like 140 bar or 150 bar or more Because you shooting 40kg do you know what bar number do i put thanks for the help

[@FalcoINC]

can anyone tell me simple steps to turn the power in my U2 compact DOWN? It's came with a power tune shooting 15 grains at 950s. makes a bark and uses more air which the FPS is great for hunting but if I want to set it back down to factory levels would I want to turn the reg pressure down? any one know where it's set stock BAR wise?

[@AfricanAirOrdnance]

Turn your regulator down a quater turn

[@davidberkley839]

Texan an Both Seneca's took deer this yr !!

[@AfricanAirOrdnance]

Awesome

[@scinner28]

I have the .30 Urugan 3 .when i see this ??? I dunno ..TBH i dunno.Is he a great shooter ??? No i dont think he is.Why ????He only talke about .22 etc ..22 is no slug shooter ....25 ..30 is slug shooter ,

[@AfricanAirOrdnance]

Thanks for watching I've had great success shooting Zan 40 gn .217 gun shoots both slugs and pellets. Problem with the 30 cal it can only shoot slugs not pellets