Use A Bar of Soap to Make a Key Clone! - Urban Survival Skill!

[@RangerSurvivalandFieldCraft]

Please Hit the LIKE and SUBSCRIBE BUTTONS as well as the NOTIFICATION BELL. Check out my PAGES! Thanks For Watching. Instagram: instagram.com/rangersurvivalfieldcraft/ Facebook: m.facebook.com/rangersurvivalandfieldcraft SRO Affiliate: www.selfrelianceoutfitters.com/collections/andrew-ogle-featured-gear?ref=u53Mby-dH6X-Iw Amazon Store: www.amazon.com/shop/rangersurvivalandfieldcraft

[@ZenThruAnger]

Person you took the key from: Hey why is there soap all over my key!

[@bren2385]

CLICKBAIT MAKES ME NOT WANT TO SUB .. THIS ITS KEY CLONING NOT LOCK PICKING

[@AntoineWilliams7118]

Looks like you could press the key even without removing it from the keyring

[@Christian_Prepper]

*PREPPER PRO TIP: In the long run, it will be easier, quicker, and safer just to learn how to proficiently "rake" the lock with the longest section of a long steel paperclip and use a smaller cut section as a wrench to get through most (90%+) of residential property and commercial office door knob locks in less than 60 seconds (obviously pick a good time when no one is around). Yes it's a skill that takes training, but then all you ever need is to always keep an innocent looking, high-quality paperclip on you at all times.* *OR if you have a sacrificial credit card you don't mind tearing up, you can just slip it in between the spring latch and the strike plate. When you know how to tweak the plastic corner it might take you 30 seconds.* *Either of these will be better than running the risk of getting caught trying to lift someone's key (which is harder that it sounds because it requires even higher level skills ---pickpocketing & stealth), or going through all that work just to realize your little soap cutout wasn't accurate enough and there you are attempting to sneak through a door with a key that doesn't work.*

[@TravelTechie415]

may be change the title to "How to gain access to your date's house without her knowing"

[@aresinamorta.staring-atthe-sun]

Did anyone else come here because they expected to see a guy cram a bunch of soap into a lock to open it?

[@dylanfletcher2138]

Yes I had hoped to see some weird shit I’m sure it works but a lot of people have made some pretty solid points in the comments. You’d have to know the person pretty well to be able to get close enough to take their key and make a imprint of it without them knowing you took the key in the first place, and that probably makes you extra shitty if you’re looking to rob them. This might be useful if you know how to break into a car maybe I can’t see how else you would obtain said key

[@dylanfletcher2138]

I was a super intendant for a bit so I’ve had to deal with break ins I’ve watched guys get into the building with ease they didn’t damage the lock of use a key but chances are if you’re doing a B&E you aren’t coming back to hit the same place multiple times

[@MonkeySWFacts]

That was my exact thought

[@aresinamorta.staring-atthe-sun]

@@dylanfletcher2138 yeah the person who commented on here saying you just need a to take a picture of the key and put in a 3D modeler program and then you can print it out is spot on, which is way scarier, you need very little true access maybe 5seconds. Also a 12Gauge shotgun can unlock Most doors too though.

[@rmsg7504]

No that's absurd.

[@paulamaro645]

The soap smells like 17 to 34 months in a federal penitentiary 🤣🤣 That line cracked me up!

[@tolik5929]

LOL they use Irish Spring on a rope , to keep deer out of gardens , they cant stand the smell .

[@arctodussimus6198]

The basic time sentenced for B&E into some buildings..

[@TonyMontanaOG]

Irish springs and ivory are both good soaps. Go buy more axe body wash kid

[@tolik5929]

@@TonyMontanaOG Didnt say they were not good soaps ......at what time did I say they were not ? I didnt . Fact is , they DO use Irish Spring as deer repellant , because deer DONT like the smell ......has absolutely nothing to do with the soap . But it does keep them away from crops

[@DONTTREADONMEAR]

But it is SOOOOO true!!!!!!!!!

[@craigstothard7518]

Another good trick if time is short. Take a picture of the key with a coin next to it. Then placing the coin on your screen of phone, zoom in and out until the coin size is the same as the picture. Using clear tap, draw around the key, then place clear tape on tin and cut as before. I saw this on a defcon hackers video a few years back and it works. Great videos!!

[@toptohyekoms]

Thats a pretty clever trick bro! Thats worth remembering.

[@professorxmcoc6538]

It's still not recommended imo cuz phone cameras have fish bowl view so it can't be accurate

[@inexistentenouniverso9230]

What do you mean it works? What were you doing to test this?

[@BimmerWon]

That’s clever. Nice

[@lefroste6370]

​@@professorxmcoc6538lol no it doesnt really make a difference

[@boydwhite3708]

Year 2042: Hi ya'll. Just got out. I can testify that everything in this video worked perfectly. Been waiting 18 years to post this. Cheers!

[@setharnold999]

😅

[@douglasfoley2060]

Funny thing is, you wouldn’t need to wait. You can do it right in prison. 😃👍

[@no.1spidey-fan182]

Someone in 2042 is gonna see this and believe it at first glance😂

[@DeitrichThomas]

Yeah you are going straight to jail I'm surprised this is still up

[@WafflesssFalling]

@@DeitrichThomas could be useful for like escaping someone dangerous like if u got kidnapped; but I’m having trouble thinking of other scenarios lol

[@mimwarlick1604]

It’s not lock picking…it’s key copying. Lock picking means you walk up with a handful of tools and defeat the lock. It’s hard to walk around with a printer/scanner in their pocket so you can take your sweet ass time making a key. If you had access to the key in the first place, go to Lowe’s and get a key cut.

[@artemiseritu]

I'm pretty sure this is for situations where you don't have access to a Lowes.

[@RANGER73CPT]

That is a BIG FAT GO....PRECEDED BY A NO....If that is the route you want to take, why not recon the lock and find out the brand and carry a few BLANK KEYS on you? That is all good and well but for THIS SCENARIO we don''t live next door to a home improvement warehouse....

[@securatyyy]

Lockpicking lawyer sells a tool that'll get you into about anything.

[@ION400]

@@securatyyyHmmm

[@philipsmith3686]

@@securatyyyincluding trouble 😂

[@tnpsheepdog3289]

There’s a simpler way to achieve similar results. You can use a dry erase marker to mark a key and then use a piece of scotch tape to “lift” the print off and transfer it to a plastic soda bottle. Then just cut it out and use the same way. This eliminates the need for the soap and the printer so it can be a little more discreet depending on the situation.

[@badtchad4935]

@@tnpsheepdog3289 ya the soda bottle method is way easier.

[@UniversalSovereignCitizen]

💜👍

[@KO_5662]

You can use a long cheap comb, a piece of Venetian blinds. No need for crazy stuff.

[@Mr371312]

With access to a printer, taking a picture with a coin and some computer skills you skip the soap entirely

[@scholarkililo8634]

Thief!!!!!😂😂😂😂

[@Vex916T]

He did all of this secret key copy tactic just to get into the pantry room filled with junk foods and beer that his wife locked up 😂

[@thehuntressdanni2972]

Sounds like an abusive wife. Only an abusive person would lock up snacks like that!! Only someone who is pure evil could ever do such a thing!! A beast so hideous it garners pleasure from such twisted torment. (P.S. Anyone got a husband they don't need who behaves this way so I can practice my new stealth snack scouring skills on them?? A girl's gotta snack!! Lol)

[@kacythomas7436]

LOL

[@giovannip]

Better yet, a room full of soap 🧼

[@S.L.O.P.]

Hot beer, no thanks!❤

[@TheSutanian]

More than often than not. A skill comes from somewhere.

[@pepelemoko01]

Intelligence services generally prefer impressioning keys over picking locks. Picking locks can leave behind marks and there is a concern about being unable to lock the door again. Lishi lockpicks provide the pin number and depth, making it easier to create keys later on.

[@3nertia]

Yeah but they're way overpriced 🤣

[@TheTdub]

@@3nertia but you get what you pay for. Buy once cry once...

[@MarilynStangl]

@@3nertia How much does a copy machine cost? A lock pick set doesn't require you to get access to the right key and what if the key you need is on a ring full of similar keys, do you make all of them? Does this fake key leave marks or possible metal scraps when used?

[@robertbrown5957]

Great information Sir thanks for your channel do you ever do classes in California. I would like to attend one.

[@camronbay1]

In our covert entry courses we show a method where you press a key against your skin and then take a picture of the skin impression.

[@brentsaner]

Modeling clay or silly putty inside that altoids tin is generally going to be far less suspicious-looking (and yield a more detailed/higher fidelity impression). You can then close the tin to protect the impression until you can transpose it/measure the pin lengths/etc. I also recommend cutting the key by buying a matching blank and filing it to the pin lengths. It'll be much more durable, you can bring it to any hardware store afterwards and get them to make as many copies as desired without raising any suspicion, and you won't need a tension wrench. It will also look far less suspicious if found on you, which grants you social access/credibility as well.

[@Dominasty]

Going to a hardware store to make copies will put you on their CCTV. I thought the point was to stay low key? I know, I had to. 😂

[@brentsaner]

​@@Dominasty Being on CCTV only matters *after you're caught*. Nobody's going to be reviewing CCTV hours looking for someone who *might* be copying a key they shouldn't have. Getting a key copied from a blank you file won't raise suspicion.

[@Dominasty]

@@brentsaner what happens after breaking and entering after the investigation starts? Elude the forensic investigators and police? But I'm not willing to take those risks. Best to keep your face off of CCTVs when in the act of committing a felony.

[@brentsaner]

@@Dominasty Read again. They need to positively identify you as a suspect *and* correlate cut lengths of the key *and* know which hardware store you went to and have a general idea of when. Assuming this hardware store has CCTV coverage of the keycutter (mom and pop's tend to not). You aren't telling me how they're doing the very first step, identifying you as a suspect. You're more likely to be on CCTV for the entry *itself*, and hiding your face will raise caution of those around you sky-high.

[@Dominasty]

@@brentsaner You're extremely naive. They use the shotgun method, casting a wide net, and matching CCTV to timing and suspects. Then the interviews and narrowing starts. Go ahead, though, keep believing it's a great idea to put yourself on CCTV, in a hardware store, to make copies of keys you're trying to use to commit felonies. I mean, come one, man...this is this is the stuff detectives laugh about when stupid criminals do stupid things. Smart enough to know to make copies of keys but dumb enough to put yourself on camera and/or get receipts on digital transactions (credit/debit/mobile pay). Talk about non-repudiation and destroying any case you possibly thought you could have. I'm only responding to such terrible ideas like yours in the hopes of stopping someone from committing crimes and ending up in prison. I mean...how stupid can a person be to not understand how simple this is. Then again, this is why I don't commit crimes.

[@snaz15]

Bruh I thought he was just gonna jam the soap into the keyhole until it takes the key's form 😭

[@ChodyCheasley]

I know me too lol How dumb are we? 😅

[@alannathewarrior2195]

My comment got deleted I said you could just but the soap bar in a sock and use it on the person who has the key 😂 apparently KZbin doesn't like dark humor

[@JustinTK416]

I too miss the days when you could just comment any unhinged or edgy joke/remark and not have KZbin play parent. These days, I can barely swear in my comments without them getting hidden or outright nuked.

[@thomasmclean2211]

Good one lol

[@lancea7843]

Bet I can't say fuck anymore

[@vinnyandlin8510]

And yet bots comment about cp and dogs being killed

[@mikhaelcouchman8783]

KZbin is extra stazi ATM, I have had easily over 20 comments deleted this month, most of them instantly after made

[@matth1139]

This will be handy for those all-too-common situations where I need a key and have access to a bar of soap, Altoids, and a copy machine, but not a Menards. Very helpful.

[@bufordhighwater9872]

Using an impression to make a copy isn't lock picking. Not to mention, if you only have a key for a limited time and you're going to need to cut or shape your final product anyway, just trace the key, get the bitting heights, or mark a blank key, the file the the blank to match the information you got from the original

[@victorpapaavp]

Awesome video, love how you addressed material during improvisation! I suppose too, if you had time to gain access and weren't in a super huge hurry, you could swing by a hardware store and grab a key blank for the key in question, then you don't have to contend with whether or not your metal components will hold up for turning the key. File it down with a hand file, and you're there.

[@kevbu4]

This would also be a lot less suspicious if you are caught with it or seen using it. you just have a key to the door.

[@joycemyers8140]

As a property manager for quite a long time, ive had instances of tenants changing locks and moving out just to get you to break something getting in. Ive learned a lil trick. I use a small grinder to cut lengthwise down the type of key for the lock, removing the teeth completely from there a flat wire bent on the last 1/8th of an inch is used to tickle the tumbler pins into alignment while using the key as a tensioner. 2-3 strokes and the lock is open..

[@lewistaylor228]

Taking MacGyver to a whole new level! Awesome!

[@myname-mz3lo]

no. this is a well known old technique . and mcguiver would pick the lock not do something where step one is : get the key

[@Christian_Prepper]

*PREPPER PRO TIP: In the long run, it will be easier, quicker, and safer just to learn how to proficiently "rake" the lock with the longest section of a long steel paperclip and use a smaller cut section as a wrench to get through most (90%+) of residential properties and commercial offices in less than 60 seconds (obviously pick a good time when no one is around). Yes it's a skill that takes training, but then all you ever need is to always keep an innocent looking, high-quality paperclip on you at all times.* *This will be better than running the risk of getting caught trying to lift someone's key (which is harder that it sounds because it requires even higher level skills ---pickpocketing & stealth), or going through all that work just to realize your little soap cutout wasn't accurate enough and there you are attempting to sneak through a door with a key that doesn't work.*

[@rayneweber5904]

By the time you made the flat peice of metal to make the key I just keep thinking... shim. Just make a shim

[@edwardfletcher7790]

And if it's a deadlock like 95% of modern doors ???

[@myname-mz3lo]

@@edwardfletcher7790 ??????? bahahahaha you really think most dors are secure ? most doors are older than us

[@edwardfletcher7790]

@@myname-mz3lo I'm simply pointing out that the technique doesn't work on a deadlock...jeez Lockpicking is a different story...

[@talljohn66]

You’re gonna have people smelling their keys on a daily to insure no duplicates have been made. 😂

[@Kchill1986]

Here in Florida lots of people sniff their keys for some reason lmao😅

[@steveclark..]

My keys stay in my jeans pocket with me all the time so good luck with getting a print of mine. Better send a very attractive female to get me naked and distracted first. LOL

[@gneu1527]

​@@Kchill1986puts cocaine on keys and sniffs it

[@Kchill1986]

@@gneu1527 Naw, Loo seat lids mate.

[@Impending_Doom]

I think im in some kind of watchlist now

[@espurrseyes42]

A villain in Ace Attorney did something similar by pressing coins into soap, pouring water into the mold, freezing it into ice in the cold outdoors (game was set in Britain during winter), then using the ice coins to cheat an old age heater's coin reader with the identically sized ice coin to a real one, getting free heat. The ice coins would eventually melt and drain out of the reader through a hole, so they'd be gone by the time the guy that pulls the money from the machines comes.

[@cindyjean3208]

Wow!!! I can’t imagine ever doing this… But I’m amazed at the ingenuity of it all… Thanks for sharing … 😊

[@ARAW-__-]

If you need to do it, you can do anything 🫡

[@Mizzouriboi02]

4:21 **builds in Lego Batman the game**

[@martindrahajunior4102]

😂

[@daviddemand6856]

Why not sandwich the key between two halves of the soap, as a mold, then fill the void with some JB Weld? Would be an exact replica of the key in no time at all…

[@Dood-man]

Or just imprint it completely in one bar then fill it... you could use solder, or something hard! Gorilla glue perhaps? Can always sand the face if it's too thick.

[@Doom96YT]

he just taught every convict who watches KZbin how to break and enter easily

[@darrendyson8347]

I don't get why he had a gun in the beginning of the video and then says he needs to return the keys without anyone noticing but doesn't condone breaking and entering?? 🤔

[@bewd4310]

Easily? 😆 the precision required for cutting the shape most are giving up in seconds.. this is only of use to skilled thieves.

[@BX--nq6gf]

​​@@bewd4310 is it of use to anyone besides thieves?

[@k1llsh0t_87]

​@@bewd4310no skilled thieves would use one of many far more efficient methods than this

[@darrendyson8347]

@@bewd4310 and even better skilled residents and law abiding citizens willing to effortlessly dispatch them

[@JesseCase]

Lol, Third key is the charm! At least you didn't try to BS us that it works perfectly everytime. I personally appreciate such honesty!

[@Lythir1]

Picking seems way easier. You could also just take the paper cutout to one of the newer automated key making machines that uses optics to scan the original key to make a new one.

[@ronberry65]

the lock he shows is so super easy to pick with $5 pick tools rake and tensioner and practice

[@kyraeus]

Why bother to pick when a dollar spatula from any dollar store or $2 set of orange hook picks from harbor freight applied to the latch has the same effect in usually less time?

[@tylerhall6455]

Right. Ive done this with a pick set. A good quality main door lock is much harder to pick and the method in this video would be very difficult to make work.

[@-Raylight]

*"Soap trusted you... So how in the hell did you open the door??"*

[@AlistaTudor]

hahahaha

[@TheGingerBreadMan1987]

My man is an unending wealth of knowledge. This channel has been life changing and extremely motivating. Thank you brother!! 💪🇺🇲🦅

[@Subkubchik]

Also a great guide how to pick a key leaving the most evidence possible😂

[@myname-mz3lo]

right ? its like law enforcement payed him to teach wrong things

[@PRISON-REALM]

Friendly Reminder: Do NOT drop the soap.

[@theblankking1966]

Thanks for the survival tip! Now if I get locked in a room with only a bar of soap, a working printer with ink and plenty of paper, preferably a marker, an altoids tin, tape, various cutting equipment specifically for metal, and a paper clip, I’ll be able to escape :)

[@ASnakeintheGrass]

A key blank and a dremel would work great

[@Part.No.1xbil.Prod.Tp.MXMVIII]

first place my mind went to, that or a piece of polycarb and a razor.

[@porkflaps4717]

Is it possible to take a high definition picture of a key and precisely size that picture to the exact dimensions of the key, and then make your jig from a scan of that? If so, you could cut that whole "steal key, soap imprint, return stolen key, photocopy soap for your jig" part of the process out....but I'm just spitballing here,, don't know if this is even feasible. If so, could be a backup/alternate way of creating the jig to cut your key

[@mikebrown7649]

Yes it's always easy to steal someone's key and then put it back in their pocket later. 😂

[@octayveon4938]

social engineering

[@Christian_Prepper]

*PREPPER PRO TIP: In the long run, it will be easier, quicker, and safer just to learn how to proficiently "rake" the lock with the longest section of a long steel paperclip and use a smaller cut section as a wrench to get through most (90%+) of residential property and commercial office door knob locks in less than 60 seconds (obviously pick a good time when no one is around). Yes it's a skill that takes training, but then all you ever need is to always keep an innocent looking, high-quality paperclip on you at all times.* *OR if you have a sacrificial credit card you don't mind tearing up, you can just slip it in between the spring latch and the strike plate. When you know how to tweak the plastic corner it might take you 30 seconds.* *Either of these will be better than running the risk of getting caught trying to lift someone's key (which is harder that it sounds because it requires even higher level skills ---pickpocketing & stealth), or going through all that work just to realize your little soap cutout wasn't accurate enough and there you are attempting to sneak through a door with a key that doesn't work.*

[@RT-fb6ty]

Lock Picking Lawyer channel on KZbin will save time and effort.

[@ARAW-__-]

Learned much from him!

[@thoughtstream9591]

Great video. Just wanted to add that something very similar can be done from any image you can get a hold of(for example on social media). If the physical copy doesn't work, the imprint/picture also makes lockpicking easier/faster, especially if there are anti-pick features in the lock.

[@saritaford3667]

Use the soap to make a "clean" get away!!! 😆😅😂🤣

[@PumpyGT]

har har har.

[@cocomelons1013]

U just done the world a great favour Urban thieves skill

[@terryrichards8645]

Looks like a lot of work. If you can’t use a charge card to get in I guess that’s the only way to go. Thanks for another great video. If I ever lose a key I will know how to get in my own property. Hopefully never have to do it on anybody else!😊

[@fredsimmons2793]

A plus for Ivory soap in your kit is ,ivory soap is one of the only soaps that float on water,that was one of its main original selling points way back when people still washed in streams and ponds.Also believe it or not it's awesome trot fishing line bait.Put chunks on fish hooks on the trotline and the water wears it down while carrying the scent and elements downstream,saturating a large area.Its a southern thing.

[@erinhellebuyck7527]

Thank you. A lot of work to get into a locked room.

[@RangerSurvivalandFieldCraft]

Very true. I prefer the letter D in the breach obstacle acronyms AUTO-D we learned in SERE. Around/Away, Under, Throw, Over or DESTROY! The foot is always an option!!

[@kpec3]

Genius. Love this kind of stuff. Narrator sounds like a man! REAL MEN!😊

[@stevep7346]

"And that's why we call this jailbreak the "Irish Spring."

[@SMP2390]

Okay this firm example of not judging a video by it's thumbnail because I thought this was like a survival video how to unlock a door with just soap lmao

[@mRidley508]

I was somehow expecting him to shove the soap into the lock really hard until it forms into the keyhole or somethign.

[@GFDthatsMe]

Pretty cool idea. Best thing to do is either buy or make a bump key. Will work on 90% of doors

[@chadblevins5602]

I had a friend who could look at a key for a couple minutes and say a blank key with small files make that key from memory. He’s dead now due to liquor and a woman but I though he had a talent.

[@arthurmann578]

What if you fill the soap inprint with epoxy resin glue to make the entire key? Then you could use a small jewlers file to finely finish up or trace a metal key using the epoxy one instead? Epoxy is VERY strong and you could turn the lock with it alone maybe. I have seen people make imprints of BOTH sides of a key. I would imagine that the slots on both side are made differently or there is some other difference between both sides on purpose maybe? 🤔 Don't know if this would work. Just a thought.....

[@clarkleakins879]

Use a credit card from the purse to make the key. Easily to cut with only a good knife. Use lipstick from the womans purse, lipstick the key, paper (or business card in the purse) pressed on the the lipsticked key for the shape. Use your own sharpie to paint the key, press image before the paint dries.

[@Christian_Prepper]

*If you have a sacrificial credit card you don't mind tearing up, you can get through nearly 90%+ of all residential and commercial office door knob locks by just slipping it in between the spring latch and the strike plate. When you know how to tweak the plastic corner it might take you 30 seconds.*

[@NewHampshireJack]

A great skill to develop and file away in your back brain in case of need. Thank you for presenting this

[@thegreyfuzz]

Pretty sure you'll find that plastic (like a soda bottle) works better for a temporary key than sheet metal, easier to cut down and far less likely to contaminate the work area with blood from those metal shavings. Although a single paperclip alone will easily defeat most Kwikset residential type door locks as shown in the video in less than a minute or two (as well as most Master branded padlocks).

[@JohnMurphy-dw6ml]

Longest breaking and entering ever!

[@Fearlesscardinal]

Thanks I've been trying to get in my neighbor's house. Great tutorial.

[@hobbiescultura2610]

No need The bar of soap, Just cpy The key at xerox machine!

[@les3449]

Remember, he was under a time constraint to get the key back to the key ring.

[@joshbreeze1865]

Young kids will have to google Xerox😂

[@1800imawake]

There is no need for soap or copy machine just key,fine tip pen, metal, and scissors. If time is really a factor, just take a picture of key.

[@GameJam230]

My high school English teacher told us a story about why he never lets his students use his keys, and it was because his friend when HE was in high school did this exact same thing to reproduce a real metal master key to the entire building.

[@glacousxx]

Thank you very much. Hopefully i wont have to use this 😂. But sometimes we get locked out and this is a life skill. Always thankful for the valuable content sir.

[@SquidGunman]

Awesome!

[@WakoDoodle]

step 1. get soap. step 2. locate owner of key. step 3. follow them somewhere private. step 4. use soap to knock out person. If this fails, shove in mouth. step 5. While confused or out cold, rummage for the key. step 6. use key on lock. step 7. reclaim soap. steop 8. repeat until satisfied.

[@philstrange3695]

You can do the same thing with the paper clip and a piece of can.

[@dinosatay]

i feel like you could probably just 1. do the soap thing 2. color the edges with a marker 3. press onto paper 4. use clear double sided tape on top of the print 5. stick chopped up paper clips to mimic the outline & make struts/supports 6. resin/superglue the whole thing

[@JD-kg3mx]

Urban survival skill LOL! So, in essence then we need the key to a door we wish to unlock. This isn't about picking a lock with a bar of soap per say (just make an outline on the tin with a marker and forget the soap). It's about how criminals hock a set of keys or a key to make a knock off. Otherwise, we can just go to a CVS, Walgreens or a hardware store with the key you hiked and get a key made. Duh.

[@TheRealFreznoBob]

I'm tempted to try this with just paper, in layers, or cardstock. Then hardening with krazy glue to keep the points from bending and turning with a tension wrench. Maybe two layers of cardstock with phenolic glue between them and crazy glue to harden it all. Thanks man, I would never have thought of using a copier, bravo!

[@sir404]

Real life mcguyver. Only thing is i wouldve wore gloves

[@kamnovak5268]

after cleaning the excess soap we also want to remove any traces of the soap scent. using a knife blade to remove the soap in the grooves may leave a scratch mark on the key which may be noticed

[@manofkentcatapultsgunsando5069]

You've watched too many Bond films mate

[@Meme-qd2oj]

No-much practice in hidden organizations within the government

[@manofkentcatapultsgunsando5069]

@@Meme-qd2oj quicker to pick it

[@imanassole9421]

I understand the point.. and this is good info. I just have some questions. If home depot can barely get me a working copy of a key with a machine designed to cut real keys the copy of which I have with me.. if that still ends up being rough at best. How's a home made one made from a can gonna go? 2.. why not just make a proper jiggler? Basically a rake tool minus needing a tension wrench. Then you have a "key" for multiple locks. Jiggling is very easy on most cheaper locks with just a little practice. You'll basically have to jiggle with that key to make it work properly anyway as it will be very rough. Besides the avg guy isn't opening anything beyond cheap outside door locks and interior anyway. Which most of those can be gottwn in with a thin card. Tigher tolerance locks with security pins and such can be defeated with that key.. but you would literally have to make it perfect. That means tools, and a harder key material. At that point. It can be done.. I'm just saying.

[@07_Survival_And_Bushcraft]

5 minute crafts

[@larss337]

Window putty might work better. Or even plaster of paris. Problem w soap, as we saw, is that some of the imprint sticks on the key, thus making the "picture" on the soap incomplete.

[@Grizzly_feircy_tactical]

Thanks! Andrew more tips for a emergency!😃👍 have a good day to y’all and you too Andrew. Rangers lead the way!

[@mdmcd6273]

Quick! Find me soap, an altoids tin, fire up the scanner, and my micro snips! Can't imagine an emergency where this would be the call to action. But I'm sure I'll be surprised. Also, cameras have adjustable aspect ratios, keys are standardized, and phones connect to printers easily. But yeah, grab the soap it's an emergency haha.

[@void6570]

It is super clear to see cut when the fake key fails and he has to use the real key 7:30

[@Snow-wv2sf]

No, go frame by frame when the door opens from the other side and u can clearly see the paperclip and the weirdly shaped key made of sheet metal

[@nattyshreddz7933]

Wtf video did you watch?.. if you can't do it.. just say that

[@asafoetidajones8181]

There's a kit on the market that's just a small hinged box filled with two flat pieces of clay covered in talc, you squish them around the key and fill the void with the included low melt temp metal, in included spoon with cig lighter. A bit overdone maybe, but you don't have to wait until you get home to make and use the "key".

[@TheMangeGrain]

Thanks. It's so easy to break in... That's both amazing and worrying... Where I live, if they don't break in (actually damaging the door or the lock), the insurance won't pay anything : they'll only assume you forgot to lock the door... I guess we all need to avoid locks having keys so easy to copy.

[@veepeecee8630]

I was laughing so hard at this Altoids key. 😂 But hey u gotta do what u gotta do

[@ionescuandrei1245]

Thanks! I broke into my neighbours house and took his tv ❤

[@paulzimmerman3895]

That's badass! Excellent sense of humor. Appreciate your enthusiastic instruction! Salute!

[@glyngibbs9489]

Excellent vid thanks. What about using the soap mold to make a copy out of 2 part epoxy?

[@W_H_K]

I made a car key from a zip tie once. It worked well but you needed to use a lever to turn the lock as plastic wasn’t rigid enough to do that part. I also taught myself how to Hotwire a car…took only a few minutes. 😂

[@Atonam_real]

When ur house needs a spare key but you don’t wonna get a lock smith. 😂

[@johndoe-bq1xt]

Thank you very much. I've been wanting to make a second key for my front door. I'm going to try this !

[@TimJameson-jg8sl]

Great video as always. As a professional locksmith there are far easier ways😂 but content is content🎉❤

[@emanuelgonzalez8841]

I saw this on Prison Break, but you can use the soap to copy the key's shape and then pour some melted plastic to create a plastic key that works as well.

[@Jamespennington71]

One way I’ve used, is to make the impression of the key in clay. A wad of clay in an Altoids tin works pretty well and is discreet. You can get the entire key impression of about three keys in one mold. Also, spray a little silicone on top of the clay before hand so nothing sticks to the key and it comes out with a smooth crisp impression. Bake the clay in an oven. Once your new “mold” has cooled, melt some solder in the impression of the key. Let it cool. It won’t be strong enough to turn the barrel of the lock but it will be rigid enough to get the tumblers where you want them, then use a small screwdriver or a leverage bar.

[@tom4208]

lol me and a friend used a method similar to break into his parents room to steal there weed and cigarettes.... we printed a picture of a lock pick, cut it out and glued it to a piece of sheet metal and grinded away until we got the shape. worked great until it didnt and it broke off in the key hole after using it a few times, then we went back to the garage and made an extractor and was able to get it out

[@stevegonzales527]

“Why is there white residue on my key???”

[@jed9615]

Outstanding brother!! Keep up your good work and always keep walking with our King

[@jamespaul2587]

Wow, all you need (along with the soap) is access to a working key and a photocopier. What a great hack! 😊 Wouldn't silly putty be a better medium than soap for the mold step of this?

[@JSTRM4N]

Cool, something different! Ivory soap is the best. It floats. Smells real nice too.

[@gamedog1snapper]

This is the best vid I have seen in years thanks. Got me.

[@quentinsaville2950]

Good field expedient. This technique came from OSS and SOE techniques in WW2 [and probably earlier, but the first I know of is WW2]. OR you can buy a Multipic Quick-Key Easy Pro kit to do the same thing. Not cheap, about $200 in Australia.

[@EvasiveShado]

Love the content man, keep it up ❤

[@Silent_611]

Another banger from the 5am youtube recommendation gods

[@richardkibler3870]

Something to keep our vision/manual dexterity in proper check,Many Thanks Andrew,this could come in handy,Cheers!

[@DONTTREADONMEAR]

Love the video!!!! I am looking to buy a water filtration system. What would you suggest? Are the life straws any good? Could you make a video on ow to make a ghillie suit? Thank you for the informative videos. I always look forward to them every week.

[@remley8877]

Definitely not a bad idea for a field expedient key, but if you're a bit more prepared, wouldn't it be easier to met some gallium or similar low melting point metal and simply use the soap impression as a mold?

[@AndrewStory-op5or]

I learn something new it's a excellent idea 💡 for me if I locked my self out I can make a key 🔑 😉 so I can get back inn yeah this is very helpful 👌 love this video 👍

[@Morty_Mcfly2]

This is how we stole our answer sheets from the staff room when in grade 10

[@b.aleman8401]

This entire video was wayyy more detailed that I was expecting.