Use Mikrotik CAPSMAN to Manage multiple Access Points with multiple SSIDs on different VLANs

[@BigReddthehebrew]

Ive seen quite a few Mikrotik Videos on this subject but yours is by far one of the best! Thank you for this!!!

[@demonpr28]

Man, excellent job!! Easy to understand and implement! Thank you!

[@ipgucker]

very good explanation! Thank you!

[@user73nsnskAjd]

Video starts at 3:58

[@KRISUPLAY]

I have a cap ax and I can't configure vlans. I don't have "VLAN mode" in datapath...

[@takacsi]

with 7.14.3 cap with the vlan not working for me. I can connect to the main capsman device (what is a cap itself too) but I don't get IP if I connect on the cap. (I have a lot of working environment with older version)

[@fcosmin327]

hi, did you manage to figure it out? I have the exact same problem (ssid visible but no ip via dhcp).

[@takacsi]

@@fcosmin327 With the upgrades (I dont know when) it is started working! Do you have the latest and same ROS on your devices?

[@JDRamosA]

Excellent video, thank you very much. My question is about how to control the channels in the CAP to avoid co-channel interference? How to establish the connection standard? for example that the CAP in 2.4GHz works in Only N or in 5GHz so that it works in N/AC. Greetings.

[@user73nsnskAjd]

Done this on Mikrotik Hap Ac Lite Every step was followed, then when it came to searching for my Mikrotik Map Lite which I've put into CAP mode, it didn't list down. So not sure what's happening here

[@user73nsnskAjd]

So after searching, I found a video on Mikrotik Official KZbin. Very simple basic explanation but the step that seems to find my CAP devices was to enable a feature So on the left hand side , by the Wireless Tab.... You'll be in the Wireless Tables. Then there's another option called Cap. It's one of the Subcategories. Enable that Interfaces: Wlan1 (Can add Wlan2 as well) CapsMan Address: 127.0.0.1 Then click OK You'll see your Capsman devices (CAPs Device) And I noticed I needed to Reboot holding the Reset button in order for it to get into Capsman mode for my device, doing it via winbox somehow glitched

[@user73nsnskAjd]

So after searching, I found a video on Mikrotik Official KZbin. Very simple basic explanation but the step that seems to find my CAP devices was to enable a feature So on the left hand side , by the Wireless Tab.... You'll be in the Wireless Tables. Then there's another option called Cap. It's one of the Subcategories. Enable that Interfaces: Wlan1 (Can add Wlan2 as well) CapsMan Address: 127 dot 0 dot 0 dot 1 Then click OK You'll see your Capsman devices (CAPs Device) And I noticed I needed to Reboot holding the Reset button in order for it to get into Capsman mode for my device, doing it via winbox somehow glitched

[@user73nsnskAjd]

hshhs

[@user73nsnskAjd]

So after searching, I found a video on Mikrotik Official KZbin. Very simple basic explanation but the step that seems to find my CAP devices was to enable a feature So on the left hand side , by the Wireless Tab.... You'll be in the Wireless Tables. Then there's another option called Cap. It's one of the Subcategories. Enable that Interfaces: Wlan1 (Can add Wlan2 as well) CapsMan Address: Can be any that you choose Then click OK You'll see your Capsman devices (CAPs Device) And I noticed I needed to Reboot holding the Reset button in order for it to get into Capsman mode for my device, doing it via winbox somehow glitched

[@WyzerDev]

Hi, thanks a lot. I'm try to implement this scenario on RouterOS 7

[@Rouly88]

hello, you didnt show how to configure the cap AP himself but only the capsman router

[@timigate]

Just put the cap AP in caps mode by pressing down the reset button, plug them in and the rest, they say is history.

[@MuradMondol-y7o]

How to roaming configaration three caps accesspoint