Use This for Your lab | 24V 12V 5V 3.3V | Computer ATX Power supply

Hi friends in this video i will show how can you use a Computer power supply as a Lab branch power supply frist you need to found a green wair and you must connect it to ground and the fan starts spining it means the voltage are available for use
you will get
Output voltage
 24V 4A Max ⚠️
 12V 15A ⚠️
 5V 32A ⚠️
 3.3V 35A ⚠️
 Input Voltage 110V to 230V ⚠️
 Watt 400WATT ⚠️
View all
➡️ • Use Old ATX Power Supp...
my Other Videos
➡️ • Lithium 18650 Battery ...
Description
A power supply unit converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies. Some power supplies have a manual switch for selecting input voltage, while others automatically adapt to the mains voltage
Most modern computer power supplies follow the ATX convention: They output +3.3V, +5V, +12V and -12V on a series of color coded wires. Computer power supplies have a number of safety features that help to protect you and the power supply itself.
⚠️tags ⚠️
#LabPowerSupply #smps
#12V #ATXPowerSupply
#5V
#PowerSupply
#24V
#AdjustablePowerSupply
#PowerSupply
atx 12v 24v 35v
12v power supply, 5V, adjustable power supply, atx, atx power supply, bench power supply, best power supply, dc power supply, diy, diy bench power supply, diy lab bench power supply, lab bench power supply, lab power supply, laboratory power supply, low cost power supply, power supply, power supply unit, variable lab bench power supply, variable power supply, variable power, atx supply, bench supply, 12v supply, lab power, 12v converter, adjustable supply, lab equipment

[@Electronic_For_You]

Clear and HD version of this video Watch here 👇👇👇👇👇👇👇👇👇 kzbin.info/www/bejne/aYDPomOPoZKJesU

[@YouVance-oy4ki]

Do your best to not kill yourself using loose cables on the psu input :)

[@CatJBL]

UPDATE: I finally got the computer power supply. My car amp and speakers was rattling like crazy. And the speakers were walking around lol. This guy is a legend, I am subscribing and liking!

[@Electronic_For_You]

😄♥️ Its better then most Powersupply and also very reliable good one can give up to 400W

[@CatJBL]

@@Electronic_For_You I have a Coolmax I-400. It works perfectly.

[@Electronic_For_You]

Good one

[@terrysookhoo2528]

Lol theses power supply not stable for car aduio

[@volkanislek]

which one is logical; 1. to use fuse before 220V power switch 2. to use fuses before each outputs (3.3, 5, 12v etc)

[@Electronic_For_You]

Fuses are not needed Because it has short circuit protection 🙂

[@toridmad9479]

@@Electronic_For_You Right 🤣

[@ahmedace4911]

Thank u man Step by step, clear explanation, checking... You are the best

[@Electronic_For_You]

Thanks bro ❤️

[@CatJBL]

When my computer stops working. I will turn it into a bench power supply for my audio system until it breaks my windows 🤣🤣 Nice Idea!

[@Electronic_For_You]

😅

[@Turist.1]

👉👉ALL THE VOLTAGE IS THIS: clasic 12V, 5V, 3V. ---AND: >>24V blue/yellow+, >>16V blue/red+, >>6V blue/white+, >>14V blue/orange+, >>10V white/red+ , >>18V white/yellow+, >>8V white/orange+

[@Electronic_For_You]

Thanks ❤️

[@ezyjack826]

I have a DC pump that I use for pumping oil. do you think I could use a computer power supply to run it? I figured since it hooks up to my 12v battery that it might work with the 12v power supply. it uses 13.5 amp. I have an old AT power supply that I want to try. it has an external on/off switch with a white, blue, brown and of course black for ground. wire harness has Black (ground), Yellow (12V), Red (5V), Orange (Power Good), Blue (-12V) and White (-5V) I believe. does this sound correct? do I need to put in resistors for an AT power supply? ty for your assistance. 🙂

[@Electronic_For_You]

You can try but what Amp rating is your PSU at 12v

[@officialrmb6088]

So only blue wire + yellow wire can output high power(20~4V) , right?

[@Electronic_For_You]

No You are wrong only Yellow (12V) wire can give as much as 25A or 30A but Blue (-12) can give 1A but if You take one Yellow and one blue You can draw more then 3A Good one 4A

[@paddajunior744]

@@Electronic_For_You why does my PSU cut off when I connect 12v Yellow and Blue( both from the 24 pin plug. Please explain how I should bridge them to get 24v. Thank you.

[@Electronic_For_You]

Your PSU Turn off because It drowing too much ampere From Blue wair .....!

[@umutturan4751]

is it possible to take 14.4v with this psu, which wires combine needs? or what else need additional....?

[@Electronic_For_You]

Not possible, it's ,12v only , But you can modify it , I have video

[@blowingchannel4424]

Nice. Tried this with my PSU, all voltages are present. Thank you.

[@Electronic_For_You]

Welcome Please do not open the cover High voltage Inside ..... dangerous Happy new year 😃❤️

[@blowingchannel4424]

@@Electronic_For_You Yes, don't worry i wont open it. Happy new year too!

[@Electronic_For_You]

❤️

[@paddajunior744]

Why does my PSU cut off when I connect 12v Yellow and Blue( both from the 24 pin plug. Please explain how I should bridge them to get 24v. Thank you.

[@kristourangeau6572]

You don’t connect the yellow and blue together…connect the yellow (positive) and connect the blue as a ground (negative). That will get you 24v

[@Electronic_For_You]

yeas Blue is - l2v and yellow is + So 25V

[@alexvelez9910]

@@kristourangeau6572 And what would be the maximum amperage it could handle?

[@Electronic_For_You]

2A 25V

[@budisugiawan8187]

battery 12v 40a which cable can use? how long does it take to get full. Thx u

[@Electronic_For_You]

Use Yellow+ And Black - Use a 500W Chinese Boost converter to increase the voltage to 14V then charge the battery 1 hour

[@mihaiionascu6001]

Hi, can i use a power suply for a Project with arduino mega, for exemple: I want to power al sensor that need 5v from 1 ( 2 Dallas 18b20 sensors, 2 SSR relay, 2 Leds, 1x4 Matrix Buttons, 1 Lcd), without damaging sensors or arduino itself for power them up. The Power Suply give them exactly how much curent they need or constant 2, 3 4 ...10 A ??? 12V for 1 brushless motor (1.34 A) 1 motor 12 v, 034A 12V for Heating element (200w) Thank You!

[@Electronic_For_You]

You can see there is labeled side there is written the maximum current . You should not exceed that current.

[@akshayharidas7544]

Have a doubt, +12 volt and -12 volt to 24 volt.. can you please explain the technical side... and after getting 24 volt how the higher rating of +12 volt 15amp and -12 volt .3 a goes to 2A.

[@Electronic_For_You]

There is 3Amps diodes used on -12V side so , 2 amps can be taken

[@jayantkumawat2017]

My SMPC is completely damaged and my Monitor was also getting power supply from those only.....So, how to get my display working or any power adaptor present otherwise whole monitor will be use less

[@Electronic_For_You]

Check is there any 220v/110v ac Input on monitor?

[@jayantkumawat2017]

Can I share you picture somewhere

[@jayantkumawat2017]

SMPC fan is also not responding i think it is damage

[@jayantkumawat2017]

In my monitor thier is one HDMI cable and one cable is Adaptor which was connected to SMPC its of 220v

[@Electronic_For_You]

led monitor? And please check if there any stickers that say some Voltage rating. Back of monitor

[@realsliemoar]

How did you get 17A?, me trying to combine yellow and black only got 0.3 amps.

[@Electronic_For_You]

🤔 Add a 5 ohm 5W resistor to 5V line maybe loading the Powersupply works

[@MechanicForGMCCars]

Sir is it posibel to modify power suply to use baterry power instead of chargeing it ? Ore converting power suply to inverter?

[@Electronic_For_You]

Yeas i will do soon

[@catgarong6864]

If +12v join with +5v and -12v join -5v can output 17v? If work how many amp output?

[@Electronic_For_You]

+12v and -12v = 25v 2A +5v and -5v = 10v 2A

[@catgarong6864]

@@Electronic_For_You how i can 24v 5amps?

[@yordanmitev2720]

@@catgarong6864 no way with this power supply -12v is 0.5A this the max (Amps) if you use -12v or -5v

[@sergiocastillo2243]

Del cable rojo (positivo), y el cable negro (tierra) que es lo que está conectado para el funcionamiento del motor, salen solo +5V 32A; esto de acuerdo con la tabla de descripción de la fuente. No son 12V 15A como dice el subtítulo.

[@Electronic_For_You]

It depends on your psu

[@TennisReddy]

any way to power on the PSU using 12v DC input or any DC input voltage instead of AC

[@Electronic_For_You]

No Its not possible to power it from 12V but you can use 200V DC

[@TennisReddy]

@@Electronic_For_You could you recommend any PSU which operates on 200V DC

[@Electronic_For_You]

What do you want to power? Computer? I recommend using an inverter!

[@asifrabbanikhanpathan8432]

Can I use smps to power four nema 23 stepper which requires 3A... Four nema 23 stepper motor requires around 12A... If so then which wire should I go for? Thank you...

[@Electronic_For_You]

Yellow 12v and black -

[@yogendrachoudhary6973]

Can I get 12v 15 amp in black and yellow wire I am confused in ampere Situation 1 :- I have module of 12v 6 ampere Situation 2 :- I have 2 module of 12 v 6 ampere Bro in both situation can I attach black and yellow wire Please bro reply

[@Electronic_For_You]

Black - ground (Common) Yellow + 12V

[@dylanmacapagal1009]

I need 12v 15a or more. What color should I use?

[@Electronic_For_You]

Use Yellow for 12V and Black for Ground -

[@danielpedrozaadan5380]

​@@Electronic_For_You pero para los 15A?

[@soulbrothers7789]

15A from PSU 😂😂😂😂😂😂😂😂😂😂

[@MangoKingMangoshake-wl4uo]

SMPS ka 12 volt 15 ampere output Kaun wala wala se nikala hai please reply me

[@Electronic_For_You]

Yellow 🟡 12V + Black 🌑 ground -

[@darwinllanes8180]

How do i run a 12v 10amp water pump motor? What color of wire i need.

[@Electronic_For_You]

Black - Ground Yellow + 12V Use a freewheeling diode will motor

[@darwinllanes8180]

What kind of diode will i use. What amp do i need.

[@Ashish089]

Can you tell how much amp I got if I connect +12v and -12v to get 24 volt Plz

[@Electronic_For_You]

24V 2Amps!

[@mdhyderalikhan8725]

Hello brother Thanks for uploading this video its very informative but can u please tell me which power connector should i use to power ssd with 5v

[@Electronic_For_You]

5V Is Red + and Black Minus -

[@mdhyderalikhan8725]

@@Electronic_For_You i mean a power connector Will it b okay if i connect it to my new ssd

[@Electronic_For_You]

Hi This might help you ! www.google.com/imgres?imgurl=https%3A%2F%2Fwww.alphr.com%2Fwp-content%2Fuploads%2F2016%2F01%2Fsata-ssd-connections.jpg&imgrefurl=https%3A%2F%2Fwww.alphr.com%2Ffeatures%2F378925%2Fhow-to-install-a-ssd%2F&tbnid=dCHh_7S5gOCghM&vet=1&docid=WTzkdH48zeEPlM&w=1601&h=900&source=sh%2Fx%2Fim

[@mdhyderalikhan8725]

@@Electronic_For_You thnks bro i got my ssd dlivrd ystrday its wrking fine now

[@Electronic_For_You]

I'm happy to help you Have a nice day ! ♥️

[@CVLawmpuia]

I try to use 12 volt to run 775 motor. But it potential ( tongue) only look like around 6 to 10 ampere although it showed 24Ampere

[@Electronic_For_You]

Still cheaper then most powder supply you can buy

[@wolverine4208]

Brother! How can i get 2 12 volt out put of 2 or 3 amper and one ground (earh vire) for my audio system? Please guide. I actually need 35 +35 watt and a single ground piont for my 1047 model amplifier .

[@Electronic_For_You]

You can use Yellow +12V Black 0V blue -12V

[@wolverine4208]

@@Electronic_For_You i have 186 watt max psu. Will this work for it. And the formula above will work? I mean if i take yellow and blue, would the supply be able to transfer 2-3 ampair at both sides?

[@Electronic_For_You]

Yeas But blue can give maximum 2A

[@wolverine4208]

@@Electronic_For_You and what about yellow? I mean maximum range? If blue is 2amp at maximum that means about 25 watt. And i need 35watt at both stereo sides if one of them gives lower supply this will reduce sound quality! So what shoud i do to attend needed power?

[@wolverine4208]

@@Electronic_For_You Don't want to bother you but i need help here so please don't ignore... I have an amplifier having 2sc5200 transistors. Its a stereotype board and needs 25+ground+25volts . How to get this power from psu. Seller recommend 10 ampair transformer and i don't want to spend alot money. I got a psu so just guide me in this case..

[@nitinkuma1925]

12v battery charge kar sakte hain kya haam isse se

[@Electronic_For_You]

Yes

[@william254]

Do I need the fan spinning? I'm only using the 5v

[@Electronic_For_You]

Fan spin automatically Red and Black is 5V and current is written on your psu

[@lavague7648]

Hello what is the maximum current at 24v?

[@Electronic_For_You]

2-4A Many only give 2A

[@yordanmitev2720]

0.5A see -12v if you load more will stop for security reasons

[@lavague7648]

@@Electronic_For_You Strange the psu says that can give till 15a at 12 volt. I guess this is not constant. I run a dc motor with such a psu at 2 amper constant current and i am happy with this. When the motor stahl and takes much current the psu shut downs. After 20 minutes starts again.

[@Electronic_For_You]

🤔

[@yordanmitev2720]

@@lavague7648 if you want to run the motor with no load... use a starting capacitor. But if it takes 2A without load, then when you loaded , will take much more. According to the load, it can reach 40A or 50A depending on the motor and the load. if you want to use for fan is ok use capacitor and run, but for example for cordless drill☝️40A or 50A

[@nickmar6137]

13,8v ?

[@william254]

Can I add the 12v together to get 24v??

[@Electronic_For_You]

Blue and Green is 24V 2A Maximum

[@jhongonzalez1514]

Puedo hacerlo de 12v 7amp?

[@Electronic_For_You]

Yes - Black Minus + Yellow Plus

[@peterfrancis3865]

Black ground and green start the fan So i can connect a 12 volt DC bulb to black ground and +yellow

[@Electronic_For_You]

Yeas You can get upto 10A

[@danielpedrozaadan5380]

Como obtienes 10A?

[@VinaySinghBliss]

Can I join +3.5, +5.0, +12.0 and get 20.5V at least 10 amps of current.?

[@Electronic_For_You]

No You can only get 3,5,12,24v only

[@VinaySinghBliss]

@@Electronic_For_You I mean can I add all 3 parallel and get 20.5 total Volts

[@Electronic_For_You]

No It will shut down

[@amabonds]

+12 and +3 together will give ?

[@Electronic_For_You]

If you use 12 and 3v . the PSU will turn off

[@zakawaka3752]

Mine one turning on and then going off after connecting black and green wire and their is a pg wire is it nessery to connect it to motherboard

[@Electronic_For_You]

You can put a dummy load on 12v line that may works .... Because some psu need to be loaded before start . Use a 5W 10 ohm or 3.3 ohm at 5v line

[@yasirarham7948]

Aoa. Bhai is me sy ham (12 volt or 2 amp) Kesy le sakty hai.

[@Electronic_For_You]

Use Yellow and black wair

[@yasirarham7948]

@@Electronic_For_You Thank u sir.

[@Electronic_For_You]

Wlcm

[@anilkumarjangapelly8267]

Brother it's smps 12v 20amps available ? Use for car amplifier

[@Electronic_For_You]

Yeas But you need to give 220V to get 12V

[@dethamandiri7373]

@@Electronic_For_You how to get 12v 20a to power up dinamo 775...?? Thx for u explntion..🙏

[@amitghosh6966]

24 Volt Ampere will be very less as -12 volt has only 500 mA

[@Electronic_For_You]

Yeas I got maximum 2A 4A for short time but the diodes will explode

[@soulbrothers7789]

No way 32 amps from 5 volts 😂😂😂😂

[@Electronic_For_You]

Why not? It's only 160W = 5V@32Amps

[@soulbrothers7789]

@Electronic_For_You Do you even know what cables would be for 32 Amps ? Fuse of 25A will be blown if this have 32A. Top 5A

[@Electronic_For_You]

You think there is only one cable for 32Amps? 🤣

[@ritingupta4132]

Bro kya smps se 24v 0.25 amp nikalne possible h

[@Electronic_For_You]

Yeas Yellow+ and blue - 24V 2A out

[@ritingupta4132]

@@Electronic_For_You bro but need only 0. 25 amp just for another 24v fan running purpose so that it not burn

[@ritingupta4132]

Pls hlp think

[@Electronic_For_You]

Use Molex connectors Yellow and black. and use XL6009 boost converter set it to 24V ....

[@ritingupta4132]

@@Electronic_For_You is another possible way only from smps either by open it

[@Trollstube]

How can i get 5v with 10 + ampere

[@Electronic_For_You]

Yeah , you can get more

[@aloksupertips]

Can i connect pixel light use 5v please answer

[@Electronic_For_You]

I don't know what is pixel light but you can connect any 5V /3v / 12v load to it

[@aloksupertips]

@@Electronic_For_You 5v

[@Electronic_For_You]

Yeas you can get From RED and Black

[@tusharsokhi5404]

12v 15a output kaise milega please reply

[@Electronic_For_You]

You can use Yellow and Black wair They can give 12V 30A

[@numanahmed8888]

@@Electronic_For_You 12/120 a.h battery hogaa? Kithna time lagega full char?

[@yordanmitev2720]

@@numanahmed8888 car battery no

[@danielpedrozaadan5380]

​@@Electronic_For_You como es que consigues los 30A?

[@xitizbhatta6970]

How do i get 12v & 3A ya 4A ? For motor

[@Electronic_For_You]

Yellow + black - 12V 20A

[@xitizbhatta6970]

@@Electronic_For_You vhaiijaan 20A nhi 3.75A chaiye

[@xitizbhatta6970]

Motor jalega kya 12v 20A se

[@Electronic_For_You]

No problem 👍 Motor will run perfectly

[@xitizbhatta6970]

@@Electronic_For_You vhai ek doubt hua Wo apne jo 4:45 mai liye ho na usme yellow (+) black( -) mai konsa black hai wo yellowki side ka aur redki sideka...plz batadena

[@MonArch_Zodina]

I need 24v 10amps??

[@Electronic_For_You]

24V 2A You have to use a boost converter on 12V line to get 24V and upto 10A

[@gilrayos7240]

pde ba gamitin yan s power amp n 12volts.

[@Electronic_For_You]

20-30A

[@crazyhacksmalayalm4344]

But +12 have 15amp so 24v have 15 a yes or no

[@Electronic_For_You]

24v has 2A only

[@crazyhacksmalayalm4344]

@@Electronic_For_You why

[@Electronic_For_You]

Pc don't need 24v that much

[@yordanmitev2720]

@@crazyhacksmalayalm4344 24v will give you 0.5A no more because -12v is 0.5A and for security reasons to not burn is shutdown see label to up there write all.

[@tesstickle1182]

can i take 24v 5or 10 amp?

[@Electronic_For_You]

No 24v is 2A

[@yordanmitev2720]

@@Electronic_For_You how is 2A when -12v is 0.5A no way will stop

[@Electronic_For_You]

I tasted and it gives maximum 4A But there are 3A diode at -12V so you can get 2A from - and + rails of 12V

[@yordanmitev2720]

@@Electronic_For_You i have to this power supply and before 2 day i test to bro but max is 0.5A -12v when i put more is shutdown 😊

[@Electronic_For_You]

Not all Powersupply is same .... I'm not lieying 🙄

[@oscarbarrantes5090]

Conecte el verde y el negro y no encendido el fan

[@Electronic_For_You]

Bro I think you have a bad Powersupply please try with another one

[@ontherealm3898]

Hi can u tell me link this power supply this looks good to my PC and I will subscribe

[@Electronic_For_You]

This Powersupply is Not good, Buy more expensive one .....! This type of psu can blow up your pc

[@ontherealm3898]

Ok thanks

[@nikolaavramov43]

[@Electronic_For_You]

♥️🤝♥️

[@James-qw7hp]

Nice

[@Electronic_For_You]

❤️

[@roberthudacek]

Áno ( modrý a žltý drôt ) je to staré asi tak 15 rokov , ale iba 0,5 A !!!!!

[@Electronic_For_You]

I can't understand 😀

[@gilrayos7240]

pde ba mgamit yan s ampli n 12volts

[@Electronic_For_You]

20-30A

[@16BITMEME]

But why 25A At 2A

[@Electronic_For_You]

- 12V is Not used much in Computer hardware so -12V has 0.5A But it can give 2A

[@16BITMEME]

@@Electronic_For_You 😏 yeah

[@mohsenjamshidpour3514]

Hello.how are you

[@Electronic_For_You]

Good

[@chavita7421]

Can some body tell me why my pc power supply doesn’t have the green cable?

[@Electronic_For_You]

You should see it on the marking of PSU written PSU ON

[@chavita7421]

Thank you

[@Electronic_For_You]

😀♥️

[@terrysookhoo2528]

Y 5volts dc have so much current

[@Electronic_For_You]

Different, powerSupply have different current ratings,

[@terrysookhoo2528]

@@Electronic_For_You yess bt 5volts jus to turn on n of with all that current

[@Electronic_For_You]

I didn't understand what you mean

[@alsemi-back-up579]

YOU NEED A BETTER CAMERA THAT FOCUSES PROPLY!!!!!!!!!!!!! HARD ON EYES!!!!!!!!

[@Electronic_For_You]

Got it 👌♥️

[@николайпетров-й6ч]

22.9 no 24

[@fasihzafar7423]

24 volt ?????

[@Electronic_For_You]

Blue+Yellow 24V -. +

[@roberthudacek]

24 V???

[@Electronic_For_You]

Blue and yellow

[@mr.anonymous5498]

24v ??????

[@Electronic_For_You]

Yeas. Yellow and blue is 24v but 2A

[@mr.anonymous5498]

@@Electronic_For_You Yeap bro .... Thanks !!!

[@Electronic_For_You]

Welcome 😊

[@agadirgym_]

wow

[@Electronic_For_You]

🙂

[@safetysecond55]

Wow but i have 200W one

[@Electronic_For_You]

200W is Enough....!

[@esterlagendijk3044]

Hell no it isn’t

[@OJesusX3]

They do work more reliably than some of the 12v power supplies available online, and are often more power dense. So depending on your usage, that is a lot of power. 😊🌎🌄

[@Electronic_For_You]

Yeas and it also very cheap I get it for just 1$ From local Junk Store 😇