Thanks for the demonstration. I’m watching and learning from your videos. 🎉 new friend here
@scrapcraftastic Жыл бұрын
Welcome! Thank you for watching!
@missbeehavenagn2day3 жыл бұрын
Hey girl hey, thank you for turning me on to Sizzex!!!!!!!!! I am having so much fun! I watch you all the time with planning, now with this! Thank you soo much!
@scrapcraftastic3 жыл бұрын
You are very welcome! Thank you for watching! 💗
@normajones64676 жыл бұрын
This is the first video on how to use the Big Shot I have really understood! Thank you for your help! I just got my very first big shot yesterday and need help getting started! I have ONE die lol....I just subscribed too!
@scrapcraftastic6 жыл бұрын
Welcome +Norma Jones! I'm so glad it helped. Thank you for watching! 💟
@mellightbody82125 жыл бұрын
I know this is an old video of yours but I appreciate it so much. I just got a used BigShot and yours is the first video that actually showed me how to use it correctly. SO helpful. Thank you.
@scrapcraftastic5 жыл бұрын
I'm glad you found it helpful! Thank you for watching! 😊
@allthumbs37926 жыл бұрын
Just got a die cutter and this helped a whole bunch, especially the cracking noise ... normal. Whew! Thanks!
@scrapcraftastic6 жыл бұрын
You're welcome! Yes, i just knew I broke mine the first time I used it! Thank you for watching! 😊
@NattyNatJoli5 жыл бұрын
Thank you! I was worried I was doing it wrong as well! *the other videos I looked at by Sizzix don’t mention it.
@scrapcraftastic5 жыл бұрын
You're welcome! Thank you for watching!
@roxannerichard98954 жыл бұрын
Thank you for this video. This is the first video I have seen with someone actually showing the process. I have looked everywhere!
@scrapcraftastic4 жыл бұрын
You're welcome. Thank you for watching!
@cassieliveshere95614 жыл бұрын
Thank you so much! The best video explaining the process that I’ve seen. You made sense of the instructions straight away and demonstrated every step clearly..... such a wonderful help!
@scrapcraftastic4 жыл бұрын
Thank you for watching!
@AngieMo437 жыл бұрын
Thanks for taking the time to show how this works!
@scrapcraftastic7 жыл бұрын
+AngieMo43 you're welcome. Thank you for watching! 😀
@lesliebarney70917 жыл бұрын
Thank you so much for the vlog. I had no clue what to do with the dies that came with my rubber stamps. Thanks again! 😀👍🏽
@scrapcraftastic7 жыл бұрын
+Leslie Barney You're very welcome. I am happy to help. Thank you for watching! 😀
@heatherphillips33495 жыл бұрын
Great demo video! I am new to using the big shot!..I did not even know about the big cutting dies!
@scrapcraftastic5 жыл бұрын
Thank you for watching! 🤗
@PaperKitty995 жыл бұрын
Thank you for this video! I make Junk Journal videos and just got a Big Shot for Christmas. I’m so excited to use it and I think your video is one of the most helpful 💕
@scrapcraftastic5 жыл бұрын
Thank you for watching! 😊
@karenjoy99974 жыл бұрын
Thank you for your tutorial; great job. Very nice and easy to understand. I appreciate it very much. Just what I was looking for. Helped me a lot! Happy New Year! 🎊🎆
@scrapcraftastic4 жыл бұрын
You're welcome. Thank you for watching! Happy New Year!!! 🎉
@rmayfairecottage6 жыл бұрын
Thanks so much for your very helpful video! I just got a Big Shot yesterday and now feel a little more confident about using it. Looking forward to making lots of die cuts to use in my projects! TFS!
@scrapcraftastic6 жыл бұрын
You're welcome +Ruth Anne Buterbaugh! I'm sure you will enjoy it. Thank you for watching!
@junem41022 жыл бұрын
There's little holes in the dies. You use a pokey tool or a pin to stick through the hole to get the paper out of the die. Be careful not to force it through. I usually use a pin, because I can't find my pokey tool. The sticky side of your tool is mostly to pick up beads or to pick up small pieces of paper to glue or something. But I really enjoyed your tutorial. Thank you.
@scrapcraftastic2 жыл бұрын
Thank you for watching!
@vanyanell56964 жыл бұрын
Thank you so much for sharing! Loving it❤️
@scrapcraftastic4 жыл бұрын
Thanks for watching!
@jml95823 жыл бұрын
Im thinking of getting the bigshot foldaway. Could you tell me which brands are compatible or if most are compatible? I found some dies that are not thinlets. What do you think? I’m new to cardmaking. Help! Thanks, Jackie
@scrapcraftastic3 жыл бұрын
I think most metal dies are universal. I've never had a die that doesn't work for me. I hope this helps.
@jml95823 жыл бұрын
@@scrapcraftastic Thank you so much for your reply. That helps a whole lot! I cant wait to shop for some pretty dies! I’m excited but nervous. I want to make sure i make smart purchases as a newcomer to card making. Thanks so much again! Jackie
@scrapcraftastic3 жыл бұрын
You're welcome! Happy to help. 😊
@perucho21944 жыл бұрын
Hello, I was wondering is your black mold about 1 inch or 1/2 inch thick? Thank you!
@scrapcraftastic4 жыл бұрын
Its about 1" thick.
@perucho21944 жыл бұрын
@@scrapcraftastic Thank you!
@scrapcraftastic4 жыл бұрын
You're welcome!
@HippocritesSuck6 жыл бұрын
thank you for the straight forward instructions, much appreciated :)
@scrapcraftastic6 жыл бұрын
You're welcome +HippocritesSuck! Thank you for watching!
@staceylester4045 жыл бұрын
Where did you find the bigger dream die and the other big one next to it from??? Been looking and haven't had any luck please help!!😁🤞♥️
@scrapcraftastic5 жыл бұрын
Unfortunately Stacey, I don't remember, but you may be able to check my haul videos prior to this video to find it. I vaguely remember they were on clearance or maybe they were from Tuesday Morning. I'm not sure. Thank you for watching!
@Manifesting_Secret_Sketchbook Жыл бұрын
Can u reccoment or send a link about how to use a Double Do XL die cutting machine PLEASE
@scrapcraftastic Жыл бұрын
What is the machine name?
@perucho21944 жыл бұрын
Also meant to ask: Is that Big shot the 6" or 9" wide feeding port?
@scrapcraftastic4 жыл бұрын
6"
@perucho21944 жыл бұрын
@@scrapcraftastic Thank you!
@helen-anncooper53465 жыл бұрын
Hi ,I have just bought a mixed media die from crafters companion ,I have a Sizzex big shot .Can u help ,,which one of the tabs on the machine to cut with this die,ran it through on paper on the green tab and thought I had broken my plate
@scrapcraftastic5 жыл бұрын
If its a thin die, use the platform closed with both of the clear plates. Sandwich your paper and die between the two clear plates. It will sound like something is breaking. In the video there is a loud cracking noise when I run the die through. As long as you setup like the example shown on the platform if you have the example, it should be fine.
@helen-anncooper53465 жыл бұрын
Scrapcraftastic thank you 🙂
@feltfloristsehllamalick29587 жыл бұрын
hi dear . was wondering..I didn't get platform with my sizzix big shot white and grey . so you think I should buy this platform?
@scrapcraftastic7 жыл бұрын
+Sehlla Malick if the grey and white works the same way you will need a platform for thin dies and embossing.
@feltfloristsehllamalick29587 жыл бұрын
Scrapcraftastic thankyou 😊
@scrapcraftastic7 жыл бұрын
+Sehlla Malick you're welcome.
@annette97473 жыл бұрын
Thanks! Great video.
@scrapcraftastic3 жыл бұрын
Thank you for watching!
@blanchelee56804 жыл бұрын
Hi. How can u tell the cut side please. I just recieved this machine
@scrapcraftastic4 жыл бұрын
The side of the die with raised areas is the side that will cut. You can sandwich either way I think, but I usually put paper then my doe on top with the raised side down.
@jeneewesterfeld57144 жыл бұрын
so I have the cricut maker but seems like some of the dies give a raised or layered or 3d effect that you do not get with the cricut?
@scrapcraftastic4 жыл бұрын
Unfortunately, I don't know enough about the Cricut Maker to answer what I think you are asking.
@jeneewesterfeld57144 жыл бұрын
@@scrapcraftastic ok does the sizzix big shot give cardstock a 3d effect?
@scrapcraftastic4 жыл бұрын
If the dies you use are dimensional then yes but you would have to layer them manually. The Bigshot can only cut from what ever die you rin through it. So it depends on the dies.
@JollyRose1436 жыл бұрын
do you have to change the blade? or is a there a blade attached to the machine? thanks
@scrapcraftastic6 жыл бұрын
The die is the blade. It's what cuts the paper. The machine and platforms are what apply pressure to the die which causes the die to cut the paper. Thanks for watching!
@ahhabyaBen7 жыл бұрын
I would love to see the embossing when you get a chance 💕
@scrapcraftastic7 жыл бұрын
+Monique - CountYourBlessings712 Embossing is coming soon! TFW!
@sfoss94707 жыл бұрын
Thank you I have been wondering how that works!
@scrapcraftastic7 жыл бұрын
+Shelly Foss you're welcome! Thanks for watching! 😀
@AngieMo437 жыл бұрын
Can you also show the embossing?
@scrapcraftastic7 жыл бұрын
+AngieMo43 yes, I will.😊
@sylviamartinez91093 жыл бұрын
Where can I find me the new blue sizzix big shot
@scrapcraftastic3 жыл бұрын
Do you mean one the same color as the one in the video? If so, I don't know. Mine was a gift several years ago. If you mean another color try scrapbook.com or Amazon. Thank you for watching!
@hp77 Жыл бұрын
Can U use the big shot on glitter card stock
@scrapcraftastic Жыл бұрын
Yes. I cut snowflakes out of glittered cardstock with mine.
@natural75beauty755 жыл бұрын
Love it! Thx so much!
@scrapcraftastic5 жыл бұрын
Thank you for watching!
@jlouis52174 жыл бұрын
Where can the tool be purchased?
@scrapcraftastic4 жыл бұрын
You can get it here amzn.to/3fWMZTQ. I also think Scrapbook.com should have it as well as Joann.
@gailgaardner51516 жыл бұрын
Thank you so much! Very helpful! God Bless!
@scrapcraftastic6 жыл бұрын
Thank you for watching!
@HarleyGrl234 жыл бұрын
This vid was the deciding factor on whether I get a machine. I'm not too artsy or into scrapbooking so it's all "Greek" to me. I do, however, send cards to military & seniors and want to start making my own..You showed that this thing isn't something to be afraid of and that it's pretty easy to use. Thank you!
@scrapcraftastic4 жыл бұрын
You're welcome. Thank you for watching! Enjoy 😊
@CoolCraftyCreations7 жыл бұрын
It's amazing how many dies I've seen on sale and clearanced even. As well as the Big Shot, but wouldn't purchase it. However, as I'm watching your video, I'm seeing how much money I can save from never having to purchase die cuts again! This thing pays for itself
@scrapcraftastic7 жыл бұрын
+Crystal Wilburn yes it does. Thank you for watching!
@sarahsullivan7803 жыл бұрын
Would love to see how to embossing
@scrapcraftastic3 жыл бұрын
Thank you for watching!
@deborahguerrera40746 жыл бұрын
What tool are you using to clean up the die cuts??
@scrapcraftastic6 жыл бұрын
It's a Silhouette® Pick Me Up Tool. Thank you for watching!
@sewstyle6 жыл бұрын
Can you cut fabric with the Big Dream die ?
@scrapcraftastic6 жыл бұрын
Robyn, I'm not sure that the thin dies would cut fabric. Maybe with a different platform. I don't know.
@aprilsexton64467 жыл бұрын
Thanks for the video! I was wondering what they were! ;)
@scrapcraftastic7 жыл бұрын
+April Sexton you're welcome! Thanks for watching!
@anabelasousa50706 жыл бұрын
Hi Dear, is this machine can cut A4 paper?
@scrapcraftastic6 жыл бұрын
+Anabela Sousa no, it's too wide. You would need more of an A5 size.
@sheprays3657 жыл бұрын
Hi, thanks for sharing. I always see videos of the cuts but never the machines in action. I just may get me one. I have a cricut and I thought the same,... why get one if I already have a cutting machine. It just look more convenient to have a portable cutter.
@scrapcraftastic7 жыл бұрын
+sheprays365 you're welcome! Thanks for watching!
@me041006 жыл бұрын
What is a silhouette cameo?
@scrapcraftastic6 жыл бұрын
A Silhoutte Cameo is a digital die cutting machime. You can design your own shapes and graphics on a computer and use the machine to cut whatever you create out of cardstock, scrapbook paper, vinyl, etc. You can make all sorts of things including stickers, stencils, templates and more. Cricut is another brand and there are others as well. Thank you for watching!
@asakata15 жыл бұрын
Hola como si llama eso?
@scrapcraftastic5 жыл бұрын
No entiendo la pregunta.
@natural75beauty755 жыл бұрын
Sizzix Big Shot
@es1901196 жыл бұрын
Hello Friend. I am asking the question: how does your machine work now. Does she have any problems? I will be grateful for the answer. Thank you.
@scrapcraftastic6 жыл бұрын
Hello! It works great. No problems at all. Thank you for watching!
@es1901196 жыл бұрын
Thanks for the answer!!!
@cc-wu9cw5 жыл бұрын
I thought I was doing it wrong cause I heard the plastic cracking..