Using extenders for bike ramp

[@chefsazza221]

Love the ramp,love the bike ,love the truck ,love the video💯🔥

[@neodyneloaders5410]

Thanks, Mc Sazza!

[@darcyfunk]

Cool. Do I need the manbun for proper operation???

[@neodyneloaders5410]

Usually Dave shaves his head:) davewillems.nl/

[@stizzoforizzo898]

No but if your over 50 your definitely going to need a pair of memory foam sketchers

[@AimForTheBushes908]

Wonder how long that tailgate will last with all that stress on it.

[@neodyneloaders5410]

The ramp clears the edge of the tailgate by roughly half an inch. You can see that clearly on the movie loop on our site. Anyway, as the bike is loaded, the alloy beams bow slightly and the gap is closed. Pressure on tailgate when loading a Fatboy is around 100kg/200lbs - will last a long time.

[@kenjohnson9472]

I’ve got this same set up on my 2021 GMC Sierra with multi-pro tailgate to transport my 2019 Road Glide. “No” weight on the tailgate with some shimming of the polyurethane feet.

[@neodyneloaders5410]

We tried it out at 650kg, like 1,500lbs I guess. Say your tailgate is 2' or 650mm long. If you shim it to get a 3/4" gap, or 20mm from the edge of the tailgate to the rear pad, then I'd say your tailgate will be fine.

[@kenjohnson9472]

@@neodyneloaders5410 I should’ve been clearer, I did shim the foot at the tailgate end of the bed, the foot on the tailgate just “kisses” the tailgate so all of the weight is supported by the bed. This is a great rig!!

[@neodyneloaders5410]

@@kenjohnson9472 Good stuff!

[@fingers215]

How much is this?

[@neo-dyne322]

$2,500 depending on accessories

[@kevinroberts361]

Is that knobbie bobber, or a bobby knobber ? Don't look like no off road sicle to me

[@keeperlitandleterrip6288]

I would make an option to leave extension on and flip it up vertically/maybe help secure back wheel.

[@neo-dyne322]

Yes, that could work very well on bikes with no overhangs. However if you have long stacks or saddle bags, like on a Goldwing, the main ramp will need to be much longer to use a flip-up extender. But yeah, good idea!

[@ashleylee5445]

Very impressive 👍

[@neo-dyne322]

Thanks mate!

[@ralphdenofio2240]

Will this fit in an 8' truck bed and allow the tailgate to close?

[@neodyneloaders5410]

Yes, the ramps can be cut to custom lengths. For shorter beds we also have the AUN 250 ramp solution: kzbin.info/www/bejne/n2PEm4lua9KtfM0

[@DonSlipDubO55]

Whats the weight limit

[@neo-dyne322]

550kg/1200lbs

[@M_J_Glide_22]

is this available in the USA

[@neodyneloaders5410]

Yes, please get in touch with our official reseller at: ultimatepowerramp.com/

[@johngee3067]

I have a 5 inch lift on my Silverado. Is this gismo compatible ?

[@neodyneloaders5410]

Yes it will. The AC 001 extender will do the trick.

[@andrzejkedra7185]

What is your track model? Explorer sport trac 2005-2010?

[@abemichau4706]

That’s a great idea thanks

[@tatathelorry]

Cost?

[@neodyneloaders5410]

The ramp starts from 1925 euros excl. VAT. You can see all the prices for the ramps and the accessories at neo-dyne.com

[@tedmarakas2626]

@@neodyneloaders5410 That's not very expensive, in fact, it is dirt cheap. Broken backs and damaged dropped motorcycles cost waaaay more, never mind the PTSD and embarrassment.

[@neodyneloaders5410]

@@tedmarakas2626 Thank you for your kind words!

[@hugomartinez4476]

Excelente sistema

[@neodyneloaders5410]

Gracias!

[@tizianocrivellari9702]

Ma quanto costa schemi me lo faccio io con cuscinetti guide e motorino d avviamento a 12 volt

[@neodyneloaders5410]

Buona fortuna, fammi vedere quando è finita

[@jamesguth7375]

That is the best in other wards that is a clasik design

[@jamesguth7375]

That is the best in other wards that is a clasik design

[@jamesguth7375]

Thank you for the reply if this is the owner off the design I will tell a friend off mian I gave him my 1979 harley Davidson low rider thank you again

[@03Sturgis]

Slick

[@neodyneloaders5410]

Thanks!

[@conway2121]

Bet that costs an arm and a leg.

[@neodyneloaders5410]

You'd lose your bet

[@bobbytaylor4058]

wait for it...,🤣😁😄

[@neo-dyne322]

Yeah with the "generic" cordless it takes like 40 seconds. With a top of the range one you're looking at 25 seconds. If you need faster lifts, we can always add a starter motor to the worm drive, but it will cost, mostly in the installation of cables etc.

[@timothywhieldon1971]

for that price.. just buy a small trailer... half the cost....

[@neodyneloaders5410]

...double the pain

[@tizianocrivellari9702]

Non riesco a postare i video riesco solo a vederli devo trovare una persona che mi insegni

[@neodyneloaders5410]

Se desideri mostrare la tua invenzione al mondo, è meglio richiedere prima un brevetto. Per mostrarlo su youtube, potresti chiedere aiuto a una scuola o università locale. I ragazzini sono molto bravi a pubblicare film su youtube.

[@b-jaykingchhetri7367]

Don't be so lazy. Call your dudes joking around and take that shit off of that pickup 🤣🤣🤣

[@neodyneloaders5410]

Lazy? I can't lift half a ton by myself mate

[@eiserntorsphantomoftheoper2154]

Too much contraption going on.

[@perapetrovic2038]

Bravo. D O C T O R E. !!!!!!!!

[@neodyneloaders5410]

Thanks man, it took some work but here it is.