Using Instances and Midi Command Presets with the Line 6 HX Effects

[@danieldoran6210]

Finally!!!!! Just what I was looking for. Thanks man.

[@jmaccess]

Hi John. Just want thank you for this video. It has been key for me to understand MIDI. Much better than anything I had found before in KZbin

[@b1bwnw51]

Thank you for taking the time to put this video on line, very helpful !

[@jormayorccis1028]

Thanks on behalf of us midiots out there!

[@jimwoodard64]

Believe it or not, you helped me set up my HX Effects to control my AMP1 from BluGuitar with this little tutorial. Thank you!

[@DrGregWeisswasserND]

How are you liking Hx effects with the Amp1. I’m considering setting mine up the same way. Do you use 4 cable method? Working well? Thanks for sharing.

[@DoctorMcFarlandStudios]

Great Video. I have the HX but haven't gone this deep yet. Very informative. Keep rockin!!!

[@portvincent7068]

Thanks for posting this video. It's super useful. I know a lot of users of the HX effects want to know it this setup (switching midi pedals and a loop switcher like the disaster area) is possible in snapshot mode and how to do this...?

[@locphan7124]

Very good and funny videos bring a great sense of entertainment!

[@denisrojriv4906]

Could you explain how to do the same with the Helix the Bigsky and the timeline? Great video!!!!

[@fenderstrat05]

Trying to figure out if I can use my Disaster Area DMC-3 XL with HX FX/Timeline/Big sky I want to replace H9 with HX FX

[@panduh1060]

Let’s hear it!!

[@thenear1send]

Hey! Are you aware if one could do any of this kind of switching on a HX Stomp? I'm looking at getting the Stomp XL and I want to switch my Strymons just like this!

[@tonedover]

Should be similar - command center was added to the stomp UI in v3.0

[@anapavlovic1927]

Cool video. Can you control your midi pedals with snapshots within a preset? SO lets say snapshot 1 brings up PC 3 on midi controlled delay and than snapshot 2 in the same preset brings up PC 7 on midi controlled delay?

[@thefeydakin]

Great video very helpful. Can you also help explain how to use midi from HX to change rigs in 11R? I’m trying to use it in one of the effects loop on front end of amp flow (amp models only) like a dirt box. I know CC32 is rig channel on 11R and have tried to use it and PC change but it doesn’t seem to work… either with instant commands or otherwise.

[@axelmoya7022]

Amazing bro, Can I do this with Snapshots Mode?

[@post.sonitum]

Thank You! Great tutorial! 👍

[@LuisSoto-ly1jr]

Hello. I can tell you understand pretty the HX FX system. I have some problem with, I hope you could help me, if you will. I´m using a EB VP JR as expression pedal to control volumen block. It´s plug in the pedal in number 2. I control a preamp through the in number 1. When I assign the preamp changes in the command page, the volume parameter programmed is lost. I can´t control with the EBVPJR the volume anymore. Do you know how to fix this?

[@LEUNN_]

can you do this for snapshots instead of presets

[@TheDarinAmes]

Thanks for this video! I’m thinking about getting the Disaster Area box but am a little intimidated by the whole programming issue. Would you mind terribly if I message you for tips?

[@lilredsrt2005]

By chance, have you tried to use the hx to bank the big sky up and down? I’ve tried setting it up and I just can’t figure it out.. it’s making me crazy.

[@RiloRox]

would the procedure for changing the preset on my bias amp be the same? im thinking about getting one bc it has no built in fx

[@marton_ratkai]

Can I control the HX with a midi controller (such as ES-8)?

[@DylanBooker1]

Márton Rátkai did you ever get this figured out? I’m in the same situation and I can’t find anything in the internet about controlling the HX with a midi controller, only how to use the HX as a midi controller

[@mattg909]

How did you look up the information on the CC toggle bypass? “CC102” I’m trying to get my DAW to switch snapshots automatically using tempo markers during recording. thank you in advance

[@Stratamania]

Strymon Documentation

[@janluizleonardi9494]

Hi! Could you help me with a question about Midi? I own both a HX Stomp and a HX Effects. I connected the MIDI OUT from the Effects into the MIDI IN in the Stomp. Connected like this, every time I change a preset in the Effects (from 1A to 1B, for example), a similar change occurs immediately in the Stomp (from 1A to 1B). In short, presets are chaging together, and that is exactly what I want. However, what I want to do and couldn't is the following: when I activate Snapshot 2 in the Effects, it also activates immediately Snapshot 2 in the Stomp. Does anyone know how to set this on the Midi settings? I've already read both manuals and have no idea how to make this happen. Thanks a lot! Best.

[@davidwalk9179]

Hi, just got the HX effects pedal and I want to control my JVM410 channels with my HX but the footswitch port does not support TRS cable so from what I can tell MIDI is another option but I have no clue how to do it. Any chance you can do a demonstration? Thanks and great video!

[@danhissmusic7604]

Probably an obvious comment but if anybody is looking to use this feature in bypass mode and not have to dedicate a footswitch to it, just create some patches on your strymons with the mix all the way down and use them for your clean tone. That way, the pedals are always on so you can just switch around without sacrificing a footswitch