In this video I show how to use the (DRTK2) Phantom 4 RTK basestation to manually mark points.
Пікірлер: 24
@taipmohsen37254 жыл бұрын
Is it possible to use d-rtk2 as a gnss monitoring station alone without using the drone using the controller?
@nguyenkhanhhung70774 жыл бұрын
You can tutorial Phantom 4 RTK Terrain Awareness? Thanks!
@dilipkawli4264 жыл бұрын
Can i use 2 separate D-RTK-2 units as a Base station & a Rover at a time?
@arnaudlrc2 жыл бұрын
i'm also curious about this. but I wonder how the base would get it's precise location other than by sattelites. i think linking to a custom RTK network provides the exact base x y and z location so that the rover would be precise as well
@jamesstewart62324 жыл бұрын
It seems like the errors of the measurements defeat the purpose of the precision of the drone. Errors looked to be ~2 inches.
@Zero-wt7xf3 жыл бұрын
Can do this with a P4RTK but can't with a MATRICE 300 RTK... typical DJI.
@dwnlcked3 жыл бұрын
Might want to actually level the rod when shooting or you're introducing a lot of error with tilt.
@worldsolutionsusa79962 жыл бұрын
I will buy this equipment, the drone and the base, with your experience, is it enough or do I need to buy more equipment from DJI? Thanks for the great video!!
@joestefano41364 жыл бұрын
Russell, did you have to adjust your location in the rtk advance settings tab? Do you enter the height of the d rtk pole? Also I was having trouble with the dongle I had bought from ebay. I purchased the one you linked to from amazon worked like a charm. Thank you
@arkansasdronesolutions68644 жыл бұрын
I haven't had to process that accurately as of yet. But you can enter the pole height. I have read this : add "5.83 ft or 1.776984m to the benchmark z value "
@melaniedubois-laroche80054 жыл бұрын
Hi there, is that still work with the new upload firmewire 02.02.0403? Mine refuse to connect to NTRIP...
@harrypapadopoulos9834 жыл бұрын
Does it work with m210 rtk v2 controller ? I mean as a handheld device
@arkansasdronesolutions68644 жыл бұрын
Not sure about that model. I haven't tested it.
@vandecoteau98993 жыл бұрын
Is this the work flow to mark GCPs?
@w3rky2 жыл бұрын
Interested to know this too.
@alessandromataffo300610 ай бұрын
which app are you using?
@joshabbott16414 жыл бұрын
Im unsure why you need to connect to a network when you have a active base station? Can you not use the Station by itself?
@libitronaerialdroneservice2 жыл бұрын
The base station has an expected degree of error of up to 2m unless you have it referencing a known point. Every time you move it, you create even more inaccuracy. You need a constant on site to mark GPC's.
@davidudoh18542 жыл бұрын
@@libitronaerialdroneservice well said. or in this case a constant connection to a CORs
@scuddrunner1 Жыл бұрын
Great video! I'm a contractor and my projects are 3 to 10 acres in size and I'd like to map and fly over the projects weekley for progress reports. Could you show me how it's done? I'm on the waiting list for the new Mavic 3 enterprise that suppose to come out in the middle of November. Thank you!!
@precision_aerial Жыл бұрын
if you haven't gotten answered yet let me know I map professionally. I can help you out.