Using the 2W IR module on the xtool s1

[@JOHNNYLAZERSTUDIO]

Comment here and support each other by subscribing to each other. Let's build a community

[@shadowfox929]

I have the 40w S1 and the 2w IR Module. I have used Titanium Dioxide on white ceramic tiles with varying results. My mixture is 3 parts water, 1 part Titanium Dioxide and 1 part water soluble glue. What are you using? Thanks for sharing your talents.

[@JOHNNYLAZERSTUDIO]

thanks for watching, now I used to use that formula but have since come up with a much better formula, now i use white chalk paint mixed with titanium dioxide and found this works much better, easier to apply, and washes off easily...hope this helps, happy lazering

[@shadowfox929]

I have the 40w S1 and I have the 2w IR Module. I have used Titanium Dioxide on white ceramic tiles withe varying results. My mixture is 3 parts water, 1 part TD and 1 part water soluble glue. What did you use on the SS cup. Thanks for sharing your talents.

[@JOHNNYLAZERSTUDIO]

on the stainless cup I used my new formula of white chalk paint mixed with titanium dioxide, hope this helps, happy lazering

[@shadowfox929]

@@JOHNNYLAZERSTUDIO Sorry about the 3 inquires but it didn't appear to work when I asked after the ss cup video. I will try your mix next time I need that process.

[@JOHNNYLAZERSTUDIO]

@@shadowfox929 no worries, i mix a ratio of about 3 full teaspoons of white chalk paint and a lil less then 1 teaspoon titanium dioxide, i also add about 3 or 4 drops of water just to thin it out a bit...mix thoroughly and it spreads real nice and even, let dry and apply a second light coat evenly, let dry then engrave