Using the Behringer X-Touch in X32 Mode

[@Theanxietyeffect]

Thank you so much for this video man! There doesn't seem to be too many videos on using the Xtouch with the x32/rack anywhere. After everything being out of stock for several weeks, we FINALLY were able to get an Xtouch shipped, and while we do plan on using it as a control surface for Reaper DAW, we also plan on using it to control our X32 rack at rehearsals. We use backing tracks in Reaper, and it is a P.I.T.A. stitching between X32 edit window and Reaper's window to make adjustments. This video was a big help on what to expect when it comes in!

[@getlostinsound]

Glad to hear it helped! Check out the dual-function modes too. There’s an X-Ctl / MC more that lets you switch between X32 control and DAW control pretty seamlessly. I’ve used it with X32 and Studio One for years.

[@Theanxietyeffect]

@@getlostinsound Awesome! We have read a little bit about this, but have not dove into it yet. Once all the basics got covered with using it in Reaper and the X32 rack separately, the plan is to check that mode and dive into it!

[@patrickmeany1526]

Great video! Thank you for making something so helpful. In case you haven’t figured it out yet, the “cycle” button changes your input routing from Record to Play. It’s the function of the the 6th encoder on the home tab of the routing menu. Great for virtual soundcheck!

[@getlostinsound]

Great tip, thanks!

[@telengardo]

This video is INSANELY useful. None of this seems to be documented anywhere that I could find, so thanks!

[@getlostinsound]

You’re welcome! Yeah, I made the video because I couldn’t find most of this information anywhere. If you download the driver for the X-Touch, there is a PDF of the button layout. That’s how I got started in figuring the rest out.

[@blueslsd]

THis is one of the best video demos of this. For me you show the banks as they are and this helped me. Cheers Bob.

[@billgreen4592]

I can't begin to tell you how helpful this video is! I really wish that Behringer would offer this much depth on the itouch. Thank you for taking the time to make and up load this!

[@anatolikus]

Grate video! The jog with few buttons around is for the SD card recorder board.

[@leviross973]

Thank you so much for this in depth video. Looking to set up a small church with x32 rack but also looking for a good way of controlling from the front of house and this looks like the answer. Great job.

[@getlostinsound]

Glad to have helped!

[@bjoecool]

Outstanding video. Very informative and straight to the point. Some of the buttons that you weren't sure of functional for X32 control would at least be used for DAW control. Thank you for a great video!

[@MartinCliffe]

This video is fantastic, got an X-Touch coming this week (had an X32 Rack for a while) and this will really speed up the learning process. Thanks!

[@damonluvisi]

Great video, makes me really think about moving from the full-size to this for the smaller footprint.

[@bonuscardboy]

I'm about to make this purchase for my Livestream Audio Techs... I had this thought when I discovered but was waiting on someone to make a video demo. I'm lovin all this detail! Our mix is coming in to our x32 rack via Dante in a separate room.

[@getlostinsound]

Sounds like a good setup!

[@DocMicrowave]

Great demo video! I am looking to get his console for use with my x32 Rack as well. Haven't seen any other videos showcasing that combo.

[@robbgosset674]

Thanks for a great video, this thoroughly explains what you can actually do with the X-touch.

[@andreasonarheim]

Thanks man, very helpful! 🙏🏻

[@CoolBreezeMusic7]

Great video man. This info is so hard to come by

[@KeithMarvK]

Totally

[@tasdrum]

Great video!!! I found display button is "Clear Solo" button.

[@getlostinsound]

Thanks; good tip!

[@MrArihaan]

exactly what i needed to know, thanks!

[@KeithMarvK]

This was a great video. It's much appreciated. You went in-depth and you explained well. Functions like jog wheel are for DAW control. You're using the x touch like a console, and consoles don't have directional buttons and nudge controls as they don't manipulate clips or scenes. Please do an update video on using the x touch with the x32 Rack. Thank you!

[@getlostinsound]

Hi Keith, thanks for checking it out. Yes, you're correct about the jog wheel. This video is on using the X-Touch with the X32 Rack. What new information would you want in an updated video? Thanks

[@KeithMarvK]

Maybe using the Dante expansion, taking the X32 Rack mix for recording into A DAW. That's what I'm imagining how I want to use this set up. It's actually an inexpensive way to record with multiple quality mic pres, monitoring, live performance or studio over Ethernet.

[@getlostinsound]

Cool, thanks for letting me know. I’ll consider this.

[@Mikee535]

The only thing you left out is your settings for connecting to the network. I see the network cable in the back. I've been connecting my x touch through a router to my XR18 for a couple of years now, and I just went out and did a gig and connected it to a network along with a M32r and using the same settings, I could not get the thing to connect. I just wanted a couple extra channels and I just gave up. I thought it would be no problem. I had the settings written down from when I connected it through a Wi-Fi router to the XR18.

[@getlostinsound]

Yeah, I figured the video would be long enough as is without giving a networking lesson :) Check out this video for some basic audio-related networking knowledge: kzbin.info/www/bejne/eXnFqoqGfpylhqs

[@Mikee535]

@ thanks I figured it out. I changed the network settings of the mixer to be a lot closer to the rest of the devices and everything just connected. Before it was 192.168.8.200, change it to 192.168.1.7 and bloom. Thank you.

[@tangointhenightband869]

And that my friends is how an instuctional video should be! Thank you very much! Brilliant! Question... Why didn't Behringer do one like this??

[@iansands8315]

Is there a way to mute a dca via the footswitch on the back of the x touch, or even via the midi input? Thanks.

[@aBigRobot01]

Thanks for the in-depth video! Using this same setup for the first time on a show tonight, so this helps me a lot! :D

[@vestaxpmc17]

Great video. Just what I was looking for!

[@SuperGeekBiz-ke7xy]

Great Video. What white tape do you use? Do you have a link to where to get it? Thanks

[@getlostinsound]

Sure, I use console marking tape from GoodBuyGuys.com. I'm pretty sure that's 1/2" tape. www.goodbuyguys.com/catalog/index.php?main_page=index&cPath=22_52_83

[@revelation10.1-7]

THANK YOU so much for this extremely informative video! We have this exact setup and I didn't have a clue on how to control the Mute Groups (or anything else for that matter). You saved me. God Bless you!

[@Kamertonas]

Thanks for the review. I recently purchased the X-Touch to work in conjunction with the XR 18 mixer for live performance. I couldn't figure out how to take the signal from the X-Touch via USB or any other method to send it to Live Strimming. Those videoclips are supposed to answer this question - did not give an answer. I would be grateful for help.

[@richarddillender760]

Great Video, We have a rack mount console and we've been using tablets to do the mixing. My question is, when you connect the xtouch remotely does it transfer the settings from the rack?

[@GraceBHM]

Hi Richard, Yes. The X-Touch doesn't have any settings on its own (if you're thinking about how X32-Edit software works, the X-Touch does not have the ability to have its own "offline settings" like that). It has constant 2-way communication with the mixer, so any settings that you see or make on the X-Touch are actually settings on the mixer itself. As soon as you connect it, it shows the actual settings on the mixer.

[@DethpickleDave]

Excellent content.

[@curseleisure5507]

Great video! Is there a way to fire scenes with the X-touch or do I need to buy a MIDI “Go” button?

[@getlostinsound]

Not in X-Ctl mode, but I haven't tried using the newer "Ctrl" or CtrlRel" modes, which allow for custom MIDI commands. You may be able to use "XctlCtl" mode, which allows you to flip between XCtl and Ctl modes with a single button press. That's the extent of my knowledge on it :)

[@halidharis]

So,you controlling x32 rack directly without host computer?

[@getlostinsound]

Yes, although you could do either/both.

[@bonuscardboy]

I'm guessing... You can control both by using a network switch?

[@ogasi1798]

brilliant rundown thankyou !, this pairing is exactly what i am looking at and i am just wondering whether to go x-control and rack or x32 producer.

[@getlostinsound]

Thanks! I think it depends on how you plan to use it. Studio? Stage? In the studio, the most obvious difference in the control surface is that the X32 Producer as the advantage of controlling 16 channels at once (vs 8/9), while the X-Touch has the advantage of color-coded scribble strips. If you're using it on the stage, you can run your ins/outs directly to the mixer, which stays by the stage, and control it from mix position without having to run a conventional snake, as long as the X-Touch and X32 are on the same network via CAT5 or WiFi.

[@danpeaslee6786]

The Rack is difficult to get around- newbie may find themselves frustrated. Rack + X-Touch in studio maybe but you'll find a steep learning curve (that may be better used recording/crafting your music). Newbie + Rack + live gig = deep sadness and regret. I'm 3 yr. X32 (full size) user. Bought the Rack for live- even downloaded my presets into the rack. It's still very frustrating at times.

[@sejoymathews]

​@@danpeaslee6786Let me know if you are selling the X32 Rack.

[@utilisemedia]

Hi and thanks for the vid. I’m a newbie with an XTouch looking to control a MR18. I’m wondering how I can recall or assign buttons to Buses. Like what you have at 4:20. and where you have used tape to name the buttons. Thanks

[@andrewhenderson8782]

Hi there. Have you put your X-Touch in X-Control mode? Once you do that, you shouldn't have to program or assign any buttons.

[@utilisemedia]

@@andrewhenderson8782 thanks for your response. It is in Xctl in the first little screen to the left. I’ve just noticed some other options of xctl/…. Should it be 1 of them

[@utilisemedia]

@@andrewhenderson8782 everything is working fine. Except i just want to choose Bus from pressing 1 button then a bus gets called and sliders move to the preset position. Like a single button press to recall bus 1. (that changes could be made to on the fly)

[@getlostinsound]

​@@utilisemedia The only two things I did before making this video are (1) put the X-Touch in Xctl mode, and (2) make sure the X-Touch and the mixer are on the same network and can "talk to" each other. Everything else you see in the video is just the default settings. When you press the button that is labeled "Bus 1" on my X-Touch (which is actually the "MIDI Tracks" button on yours, if you don't have yours relabeled), you should automatically enter "sends on fader" mode for Mix Bus 1.

[@mhzministries]

Great video, thank you! Have you figured out how to get the scribble strips to display the channel label instead of the bus configuration (Pre, PostEQ, etc) when in fader flip mode?

[@getlostinsound]

No, I haven't seen an option for that.

[@woodward_sam]

Hi Jeff - did you ever find an answer to this question, please?

[@mhzministries]

@@woodward_sam I did not get an answer.

[@JazzAlto]

@@mhzministries This is unfortunate. Just got a X-Touch and X-32 Rack and when I found this great video, I was surprised that the scribble strip would change display without a way to give you channel label.

[@danielbolduc]

@@JazzAlto Absolutely unfortunate, I just got my X-Touch and link it with my X32 to find that out. I hope a solution will come soon!

[@uselessoldman7964]

It was a hard decision whether to buy the x32 rack with the xtouch or the X32 compact. I went for the compact and think I made the right choice except the xtouch has the advantage of being the better DAW contreoller since the X32 compact has only limited control, the full version is way better and the wing is best but you pay a price for the extended features.

[@wilsonbatuyong1147]

Amazing video. just wanted to know how can you connect a separate laptop for zoom or teams via dante network and being controlled by the xtouch?? thanks in advance

[@bertblank8742]

Great video. Do you know if it can control cues?

[@getlostinsound]

Not to my knowledge in X32 control mode.

[@Shtibdab]

Love the guide! Did you show how to link channels? Did I miss that part or can the X Touch even do it?

[@getlostinsound]

Hey Taylor, thanks! I don't know of a way to link channels via the X-Touch, unfortunately. I always keep a tablet handy at the gig for things like this.

[@thecorn7137]

Can I hook up this X Touch and still utilize a tablet at the same time? Would I just plug them into a wifi router as a pass thru?

[@getlostinsound]

Yes, no problem at all. I’ve used the X-Touch with the mixer, hard-wired computer, and wireless tablet, all connected via Ethernet or WiFi to the same router.

[@brutroyallabel3268]

Great video! I have a question: Does the X32 rack´s display follow what you do on the X-Touch? Like when you select the EQ for a channel, does the display on the X32rack switch to that EQ page and visualize what you are dialing in?

[@getlostinsound]

I don't know the answer to this off the top of my head. I'll have to let you know next time I hook it up.

[@1001lew]

It doesn't unfortunately. You can set x32 edit on a computer to do that but not for the x-touch.

[@AdautoAraujo]

Best video related to this matter. Thanks a lot!

[@pietersmith4943]

Great video, thanks! How customisable is the fader layout and assignments? E.g. could we set it up to have someone control only selective mixes busses and e.g. sends from all channels to those busses? This would include no access to the main level from the x-touch. The scenario is a volunteer at a church who has to run a separate mix to a live stream, but does not need access to all other main channels. If not via the control x32 option, then I wonder if something like this might be possible with a over midi-type setup?

[@getlostinsound]

Hi Pieter, unfortunately not. As far as I know, the X32 and X-Touch channel/bus/fader layout are static. You’d probably need to teach the volunteer how to make sure they were controlling the desired bus mixes. There is probably a way to do what you’re asking with advanced MIDI control, but the X-Touch isn’t programmable, so it probably wouldn’t work. I believe Behringer provides the MIDI implementation specs for the X32. You could look at that to work out a custom control situation.

[@pietersmith4943]

@@getlostinsound thank you, I appreciate your advice

[@JezielBrizolla]

do u know if works with X32 full, i am thinking about put one of that to manager our monitor...

[@paulmartella9160]

Great video! I was thinking about getting an xtouch and an xr18 to mix the live sound for my worship band. I need something portable like the xtouch, would this be good for running live music?

[@getlostinsound]

Yep, that’s a great setup. I’ve used it several times. As you’ll probably read elsewhere, don’t rely on the built-in WiFi of the XR18. I prefer a wireless router that is hardwired to both the XR18 and the X-Touch, and just use the WiFi capability for mobile devices.

[@paulmartella9160]

@@getlostinsound so for now my set up would be everything up on stage with me… no sound guy. So I guess I wouldnt have to use a modem at all , I would just wire directly from the xtouch to xr18 right? Also would it be hard to mix just from the xtouch with no laptop or iPad?

[@paulmartella9160]

I was thinking of just getting the x32 producer, but it’s too big.

[@getlostinsound]

You can certainly wire directly, but keep in mind that there are certain functions/can’t you can’t get to with the X-Touch (I mention a few at the end of this video). You’ll have to decide whether that will work for your scenario. Personally, I like at least having the option of connecting another device, even if I don’t plan to use it often.

[@paulmartella9160]

@@getlostinsound ok, well I have an iPad, can I use that?

[@tahrahandrews1829]

Hi. Great video, thank you.. Do you know if you can soft patch the channels?

[@getlostinsound]

Yep, watch the video from about the 5:00 mark to 6:30 .

[@tahrahandrews1829]

@@getlostinsound thank you so much. Not sure how I missed that. 🤪🤪🤪

[@tahrahandrews1829]

@@getlostinsound thanx! I did see that. Maybe my Termanology is off. Let me explain, would I be able to take channel 16 from the bands X 32, and control it from my channel 1 on my X touch? Looking to have the X touch faders control random X 32 channels. Thanx!

[@getlostinsound]

@@tahrahandrews1829 Oh ok! No, unfortunately you can't rearrange channels. When in X-Ctl mode, the X-Touch mirrors the X32/M32 mixer's layout. If this is a dealbreaker, you may want to take a look into the mixing station app for mobile devices. I use it often when running sound from a tablet and I like it a lot better than the stock Behringer app. I have not used this feature, but apparently you can connect the X-Touch (in Mackie Control mode) directly to your mobile device (running the mixing station app), and the X-Touch will mirror whatever layout you have set up in the app.

[@tahrahandrews1829]

@@getlostinsound Thank you so much for the info.. Such a bummer, i thought that was one of the easier things to do with digital mixers.. Oh well.. I’m going to have my sound man dig in just to make sure.. Great idea on the non Behringer app; I actually use one from a Fyre pad (the Amazon pad) I use an app where you can add only the channels you’d like to see (they call it a layer). I’m a drummer, so i want to get away from trying to manipulate any kind of pad while I’m performing. Plus i have a 20ch analog board behind me for drums, etc.. At least there are options. Thank yo again.

[@hansdampf6687]

Good Video, can you tell me how to put my own configuration to the buttons, because I'd like to put for example mutes to the Function buttons.

[@getlostinsound]

This video is just for "X-Control" mode. I believe there is a "custom" mode, but have not looked into that. I'm sure the information is in the manual or the documentation that comes with the latest firmware.

[@joele.norwood857]

Where can I download your setup for the controls?

[@getlostinsound]

Hey Joel, there’s nothing to download! It’s all stock. I used the layout PDF that is included with the firmware download, and just used tape to make labels for the controls.

[@djdragstorm6320]

How do i get the scriblestrips to be Collored ?, when i'm looking at my X32 Compact Desk or on my PC the channels all have the Correct Collor. But on My X-Touch all the scriblestrips on all channels DCA etc are the standard Blue. Somehow i cant get the Collor on the scriblestrips of the X-touch... Everythinmg else works. Please Help is apreciated.

[@getlostinsound]

I'm not sure. There aren't any options I've found to turn off the scribble strip colors. When I connect to an X32, I get multicolor scribble strip colors, but when I connect to a DAW (Studio One, Ableton, etc.) they're all the same color. You're connected directly to an X32 mixer, right? If you hold the channel 1 select button while booting up, you can see what the mode settings are. My "mode" is set to Xctl (X32 control) mode, and "Ifs" is set to network. If you're in a different mode (MC, HUI, etc) or if you're connected via MIDI cables, you may have different results.

[@thethox]

In my left LED is info „No Link” What can i do?

[@ThanawinK]

Can you assign any button for control Talkback function?

[@getlostinsound]

No, I don't believe so. You could use a mic with an on/off switch as a workaround.

[@Automatix-der-Gallier]

Thank you for this very helpful video! is it possible to recall scenes from the x-touch?

[@getlostinsound]

I don’t believe so.

[@EugeneKotelnikov1975]

Best video in KZbin!!! But, I very need access to few function from X-Touch, phontom power (48v) and TAP tempo. How I can do it?

[@andrewhenderson8782]

Thanks! For tap tempo, you go to one of your effect engines that is set to delay (16:18 in the video), then use the "record enable" button right under the "time" parameter to tap tempo. For phantom power, go to the "track" layer (in the video, my tape label says "GAIN"). While pressing and holding the encoder for the channel you want to toggle 48V for, press the record enable button just below. You'll see a "P" appear next to the gain value on the scribble strip.

[@jonovangrinsven1298]

Thanks for the video mate. Do you know if you can have the Tap for the delay somehow. This was the main reason for me buying it and can’t work out how to get it going.

[@getlostinsound]

Yep. If you go to the effects page, the record enable button under the “time” parameter becomes the tap tempo.

[@captainkirk3000]

So the select button on the x-touch doesn't also select a channel on the x32 rack screen?

[@getlostinsound]

Unfortunately not.

[@matthaslam2840]

Hi, really useful video. I have the same setup with the X32 rack onstage and my X-Touch at FOH. I also have a PC running X32-Edit at FOH. Is there way to make the rack follow channel selects etc and therefore the x32-edit software in front of me will follow the channel selected on the X-Touch.

[@MrMattesTH]

Connect the X- Touch to the PC and remote X32 Edit with it.

[@JobGreg]

Thats the video i was searching for a long time. Is there a way to select and load scenes with the X touch

[@andrewhenderson8782]

No, I don’t believe so. You can recall scenes from the X32/M32, or from a mobile device.

[@rotkehle]

great vid. thank you

[@_a.z]

They should supply printed labels!

[@predragrozumberski9977]

hi it is compatible with x air x18 mixpult?

[@getlostinsound]

Hi, yes it is. I don't have any experience using it with the XR18, but there are other videos and manuals available for how to control the XR18 with the X-Touch. Thanks for watching this.

[@groovehawksmusic]

Great video - thank you!

[@TimmyP1955]

Some of those gains are mighty hot. I usually see the gain on a handheld vocal at around +22.

[@TheWEAWrestling]

Thank you very much. Great video.

[@ludocriado]

Thanks for your work ! Has anybody found a way to set Tap Tempo control for delay effects ?

[@jefffowler9440]

How did you get your button to be assigned like that. My is not set up like that at all?

[@getlostinsound]

I put the X-Touch in X32 control mode, which automatically uses this button layout. I just used some tape to label the buttons' functions.

[@fremontpresbyterianchurch]

In fader flip mode and you pan channels for stereo mix buses?

[@getlostinsound]

Great question. I don't know the answer off the top of my head. I'll have to get back to you next time I hook up this configuration.

[@strangersun7721]

Thanks for this breakdown. Just bought an X32 rack and am looking for some hardware to integrate into it as I'm getting tired of the iPad app. One quick question: Does your X32 rack have a slight electronic hum to it when powered on? Mine does and I'm wondering if that's an issue. Thanks.

[@getlostinsound]

No. Is the hum audible from the X32 Rack itself, or from the outputs (speakers/headphones)?

[@sudanjackson]

Fantastic - thanks!

[@DuroT]

Hi, great video, thanks.

[@damonpence]

Andrew - What version Firmware are you running on your x32 Rack? I have noticed that with ver. 3.09 the Automix, Play folder(USB) and Route Play first off only work in XCTL Mode and do not work at all with XCTL/MC or XCTL/HUI Mode mode. Even more is that the AutoMix is on the opposite end X=Click and Y= Solo. I am working from the full size X32, are you seeing the same thing?

[@knerr]

No phantom power control, as far as you know? Thanks!

[@1001lew]

Phantom control is very buried but you can do it. Press track to go to the gain layer. In there, press and hold the encoder for the channel you want and then press the rec button (just below the scribble strip) on the same channel. You'll get a "P" on the scribble strip to tell you phantom is on .

[@knerr]

@@1001lew Thanks! I had forgotten I asked. lol Needed it one day, and figured it had to be there somewhere, but could not find it. Sure wish they's update this with some features people have been asking for. Just direct (or lat least easier) access, to various layers would be huge.

[@srenpetersen9733]

Hey. Can pan sends for in-Ear? On this controller?? Best regards Søren

[@getlostinsound]

Hi Søren. I'm not sure. I've had the X-Touch in my studio for the last few months and haven't been using it with the X32 Rack as much. Next time I connect it to the X32, I'll check this out.

[@grgslls]

good video! When you select a track on the xtouch, does it appear on the screen of the x32 or pc or ipad? Tks

[@getlostinsound]

Unfortunately not, at least not in my testing.

[@grgslls]

@@getlostinsound Merci

[@dj_saxofronov8216]

Hello. Please tell me is it possible when working Behringer X Touch with Behringer xr 18 to tap tempo FX Stereo Delay blinking constantly on one of the buttons ? How to configure?

[@andrewhenderson8782]

Hi Сергей, I don’t have much experience with the XR series mixers. I’ve only used the X Touch with the X32 and M32 series mixers (like in this video). For what it’s worth, I don’t believe I remember that being possible with the X32/M32 line.

[@andrewhenderson8782]

Hi Сергей, I don’t have much experience with the XR series mixers. I’ve only used the X Touch with the X32 and M32 series mixers (like in this video). For what it’s worth, I don’t believe I remember that being possible with the X32/M32 line.

[@andrewhenderson8782]

Hi Сергей, I don’t have much experience with the XR series mixers. I’ve only used the X Touch with the X32 and M32 series mixers (like in this video). For what it’s worth, I don’t believe I remember that being possible with the X32/M32 line.

[@andrewhenderson8782]

Hi Сергей, I don’t have much experience with the XR series mixers. I’ve only used the X Touch with the X32 and M32 series mixers (like in this video). For what it’s worth, I don’t believe I remember that being possible with the X32/M32 line.

[@bartsmit902]

Great walk through, thank you for posting this video! Is there a way to control the DCAs?

[@getlostinsound]

Yes, it's described in the video. Scroll through the fader banks to find DCA faders (2:30) and hit the dynamics/assign button and go to page 3 to assign channels to DCAs (11:50).

[@CoolBreezeMusic7]

Last question I swear, which rack case is that? I've been looking at a 6RU so I can store the X touch in there as well. Is it small enough to carry on a plane?

[@getlostinsound]

I think it’s this one: gatorcases.com/products/racks-portable/tour-wood-flight-racks/g-tour-shallow-rack-cases/6u-shallow-road-rack-case-g-tour-efx6/ You’ll have to check the dimensions on the site against the airline requirements. I’ve never tried to fly with it.

[@CoolBreezeMusic7]

@@getlostinsound thanks man! I was looking at the rolling version of that! But for anyone interested, I believe it is too deep to carry on a plane. I just flew with an 11" deep, 22 x 23" L x W and it BARELY fit. So, I think I'm going with 3RU roller bag just for the X32 + laptop/controller backpack combo made by gator.

[@TylerMarletteNY]

with this work to add more faders to x32 compact?

[@getlostinsound]

Yes, you can use it as an "extra bank" of faders.

[@xaviercalvet1583]

@@getlostinsound ... So in a X32 compact you can have 24faders (ch 1-16 and DCA; ie) and in a X/M32 you have 32 faders!!!!! I imagine It will work with the new x-touch compact Greate video. Thanks

[@SektoRAlee]

How can i use the x-touch to control the x32 over MIDI, i can't seem to make it work, even though there is clearly an option called " X-TOUCH over MIDI " right above " X-TOUCH over Ethernet ".

[@getlostinsound]

Check out the X-Touch manual or the quick start guide that comes with the firmware. It tells you how to hold down one of the channel select buttons to put the X-Touch in X-Control mode and choose MIDI or Network for the connection.

[@SektoRAlee]

@@getlostinsound That's exactly what i've done. After i do that it just says " MIDI : No Link " on the Channel1 LCD.

[@getlostinsound]

@@SektoRAlee Hm... If you've checked the "X-Touch Over MIDI" box on the X32 and have chosen "Mode:Xctl" and "Ifc:MIDI" on the X-Touch, I'd think it would work. Unfortunately, I don't have MIDI cables lying around to test this with. I've always used an ethernet connection. Are you using 2 MIDI cables? X-Touch OUT to X32 IN and X32 OUT to X-Touch IN?

[@SektoRAlee]

@@getlostinsound No, i'm just using x-touch OUT to X32 IN. Could that be the problem?

[@getlostinsound]

Yes, I think that’s the problem. The X-Touch requires 2-way communication with the X32. Hope you get it working!

[@ilijahmora]

Did you figure this all out by trial/error? Is there a manual for x32 control/integration?

[@getlostinsound]

To my knowledge, there isn't a manual. Yes, I figured it out just by trial and error. It's set up pretty logically once you figure it out!

[@getlostinsound]

Hey, I was just looking back at my notes and realized that I did have the "X-LIVE Layout" PDF document that's included with the X-Touch firmware download. It shows the button locations.

[@samaikins7261]

do you think its really worth it to get if you have xr18 and looking for buttons to control it . will i be able to get about 90% of all controls done using xtouch

[@Gregoses]

yes

[@kosmos1448]

Okay I loaded M32. Do I have to plug it into the router via ethernet? It wont change colors in Mackie Mode. And how can I use the M32 in conjunction with my DAW?

[@getlostinsound]

Hey Anthony, I'm using an ethernet cable directly between the X-Touch and the X32 Rack. I had to make sure they had compatible static IP addresses for this to work. You could also connect both devices to a router or switch. If you're still having trouble getting them to communicate, I'd reach out to a friend who some computer networking experience. I'm using X32 control mode (NOT Mackie mode), which is specifically made for communicating with the X32 or M32 consoles. This is probably why you aren't getting color scribble strips. I'm not using a DAW (or even a computer) in this video. I'd check some other resources for info about using the M32 with your DAW.

[@scottzellner6412]

The Mackie protocol does not support color in you scribble strips. It does support Alphanumeric characters. You can *hard code* colors using a sysex dump. I have not found that to be practcal

[@videodistro]

You don't use it as a midi controller when connected to an X32. Make sure it is on the same network and use the special startup (press channel 1 select button while turning on) and set it for XCTRL, and the appropriate DHCP or static network settings. Then, do a "scan" (on encoder wheel 8) for it to find the X32.

[@CoolBreezeMusic7]

Hey Andrew, quick question. Are you running 3.0 firmware on the rack? And does the X touch update the Rack screen? I’m hoping yes

[@getlostinsound]

Hey Nathan, I can’t remember what firmware I was using when I made the video, but I believe I am currently running 3.08. No, the X-Touch doesn’t update your computer or tablet screen.

[@getlostinsound]

Sorry, you asked about the Rack screen. No, it doesn’t update that either.

[@CoolBreezeMusic7]

@@getlostinsound damn!!!! But i thought i saw a video of someone using it to update their X Edit or Mix screen. So at least that's something. And on the low, you should make cutouts of your tape overlays and sell that shit haha. I would buy one. But thanks for the labeling guide man.

[@CoolBreezeMusic7]

@@getlostinsound hey man when I use it it updates the faders and stuff on the screen, it just doesn't change pages and stuff, which is kind of nice.

[@Ridders1690]

@@getlostinsound 3.07 you were on :)

[@daltonrandall4348]

How the hell do you connect it? You're starting the video with everything set up already... 🙄

[@getlostinsound]

Yeah, I decided not to focus on getting everything connected in this video, since Behringer already provides info on that. Plus, this video is already 20 minutes long! I used a CAT5 cable to connect the X-Touch directly to the X32 Rack. I set static compatible IP addresses on each device. Most folks would probably connect both devices to a wireless "router", which would automatically give each device an IP address. For more help, I'd consult Behringer's manual or forums, or a friend who is knowledgeable in computer networking.

[@TheXIT]

Does anyone know how to do a Factory reset of the X Touch?

[@getlostinsound]

I'm not aware of a way to do that. Holding "select" on channel 1 while powering on takes you to a menu that, as far as I know, offers every available option you can change or reset.

[@brod12313]

They need to have scribble strips be able to change colors by itself

[@AmericanFarmerHVAC2024]

Will this work with the xair?

[@getlostinsound]

I believe so, yes. I don’t have any personal experience with this though.

[@AmericanFarmerHVAC2024]

I hope so, because this is what I want. I want to use the single Xtouch, with my Ipad, (which is always glitchy as hell), So I can select each channel, subgroup, and auxilary for monitors, and physically change it. The reason I use my Xair is because it sounds so damn good, sounds much better than any physical board, as long as it's paired to a good PA. (JBL). I'm going to try the single xtouch, hopefully it works the way I want it.

[@kosmos1448]

Why is the LCD in color and mine isnt

[@getlostinsound]

They'll reflect whatever color you have your channels set for on the console. You can change the scribble strips via the console, X-32/M-32 Edit (computer), or X-32/M-32 Mix (tablet). If yours are all set to black or white, you won't see any color.

[@小宝叔讲电影]

如何自定义热键

[@Swanlord05]

Man how much all that cost u?

[@getlostinsound]

The devices I'm using are the Behringer X32 Rack, the Behringer X-Touch, and a CAT5 network cable. I'll bet you can find pricing online or at your local music store pretty easily.

[@ChristosBassCovers]

Is this default when booking up to x32 rack? How do you connect to the x32 rack, midi?

[@andrewhenderson8782]

This X-Control protocol is native to both the X32 and the X-Touch, yes. I haven’t used MIDI to control the X32 before.

[@MoonbeameSmith]

Is there a way to attach a video Monitor so that I do not have to squint to see the screen?

[@getlostinsound]

No, I think the best solution to this would be using a tablet or mobile device with the remote control app.

[@80icio]

delay tap tempo somewhere?

[@Heywoodj1969]

You need to go through the setup, how is it connected, and how does one go about connecting...it looks like a network cable, but i can't be sure...it is very key before i purchase one that it is in fact networked... Can you confirm

[@getlostinsound]

Yes, I have the X-Touch connected directly to the X32 Rack with a CAT5 network cable. I assigned both devices compatible static IP addresses. You could alternatively connect both devices to a router or switch if you want the X32 or M32 to be on a larger network and to be controlled by other wired and wireless devices (tablets, laptops, etc.). You may need to read up on the topic or consult someone with networking experience.

[@superprim12]

Those other buttons/dial work in Logic x (or other music software) I think mackie control

[@getlostinsound]

Yep, probably so.

[@yesterdaysfire]

fuck yeah dude! thank you! super helpful!

[@danielzi4851]

I got seasick.

[@getlostinsound]

Yeah, I don't have much of a setup for video production! I was just frustrated in not being able to find anything on the web with this information, so I decided to figure it out and make a video myself. It was late at night - maybe next time I'll bring someone along to hold the camera for me :)

[@kingcosmobeatstriceratops4499]

I wish da made 1 fully midi assignable everybody wants that big hollywood mixer board but thats 4 recording live bands an orcs dis thing way over priced!

[@dj_saxofronov8216]

That's too bad

[@therealjackfisher]

Okay enough now I need one. It looks like NASA spece shuttle controls. I bet I could use this thing to control NASAs old useless junk. They claim they went to the moon on a rocket controlled by a commodore 64, I say if they had this controller they would go to freaking Orions belt.

[@dinithasirimanna2948]

Is this x touch work same as with the Midas MR18 ?

[@getlostinsound]

Yes, it works with the MR18. I haven't used it with it. Some of the buttons and function might be different.