#atv #utv #alignment Alignment of the front wheels on an atv, utv/sxs, or golf cart. Prevent unnecessary tire wear and improve steering and handling.
Пікірлер: 55
@paulh3135 Жыл бұрын
Excellent video. No extraneous nonsense and very easy to understand. Thank you.
@DirtRoadLife1 Жыл бұрын
No problem Paul H! Glad the video helped and I appreciate the feedback. Thanks for watching! -Chris
@darrentoth71652 жыл бұрын
My Teryx went the opposite way after installing the SATV arched/forward a-arms, when the a-rms pushed the wheels forward the tie rods pulled the rear of the wheels inwards leaving me with 1 1/2" tow out, not tow in like yours. Another good tip for alignment is to run a straight line from the rear wheels past the front wheels and measure from the line to the front and rear of the tire, this ensures the wheels are aligned straight with the machine. Great video, thanks for sharing !!
@DirtRoadLife12 жыл бұрын
Great Tip Darren! I watched a couple vids like that and almost did the string trick. There’s some good vids on YT on it. Thanks for watching and thanks for the comment!
@richysoutdoors25912 жыл бұрын
I’m sure some will go out and check that after watching, great maint. Info DRL. Roll on bud.
@DirtRoadLife12 жыл бұрын
Spring riding season is upon us! Can’t wait Richy. Catch ya soon!
@jonathanconverse8893 Жыл бұрын
Excellent work.
@DirtRoadLife1 Жыл бұрын
Thank you so much 😀and thanks for watching
@jfmjr1970 Жыл бұрын
You should push the machine forward and back about 10 feet to fully remove any tire scrub. It easier and more thorough than turning the steering wheel back n forth.
@DirtRoadLife1 Жыл бұрын
First I’ve heard that but makes sense. Thanks for the tip and thanks for watching jfmjr!
@jimputhoff9148Ай бұрын
Absolutely 💯!
@DarrylAdrian11 ай бұрын
Great vid. Nice work.
@DirtRoadLife111 ай бұрын
Thanks Darryl! I appreciate that
@bildreflex-de94949 ай бұрын
Man stellt erst den Sturz ein, danach die Spur. Grüße vom Reifendienst. :)
@whelmo14 Жыл бұрын
I also think that changing the camber is going to change your tow.
@DirtRoadLife1 Жыл бұрын
I’ve got over a thousand on this alignment and the tires are wearing excellent and steering and handling has been great
@maxum3300 Жыл бұрын
I agree. When he lowered it down and turned the wheel back and forth I swear it looked like the passenger tire was toed way out. Maybe it was just the camera angle but it looked way out.
@DirtRoadLife1 Жыл бұрын
@@maxum3300 must have been the camera angle.
@melissaakanubby87742 жыл бұрын
Can this be done on any 4-wheeler also? Especially a older 1? I sure hope so because I really think this is my issue I have been having with mine
@DirtRoadLife12 жыл бұрын
Depends what kind of adjustment your a-arms have but you can definitely adjust the toe in and toe out with the tie rods. If a-arms are adjustable you can do camber as well. Start with toe and see where it gets you
@melissaakanubby87742 жыл бұрын
@@DirtRoadLife1 Ok Thank You!! It’s definitely going on my list to check out. The handlebars getting jerked out of my hand out of the blue is getting on my nerves especially when I only have the 1 hand 🤪🤪
@DirtRoadLife12 жыл бұрын
@@melissaakanubby8774 good luck Melissa! Happy riding
@Loop3076 ай бұрын
Use a string. Back to front so easy.
@DirtRoadLife16 ай бұрын
Tried it. String wasn’t working that great for me
@bobtucker80715 ай бұрын
Always set toe last.
@DirtRoadLife15 ай бұрын
Did not know that! Good info Bob! Thank you
@whelmo14 Жыл бұрын
Good video but your numbers dont make mathematical sense. I dont think your measurements were accurate. Your starting measurements were .44 and 42 1/2. That would make dead straight 43 1/4 . Your second measurement was 44 and 43 1/4. That cant be. If you move the front of the tire the back will move too. So if the front of the tire was 43 1/4 the rear would also be 43 1/4= dead straight.Your final measurement was 43 3/4 and 43 1/2 which would actually give you 1/4 " tow out. I guess what Im trying to say is that if you beginning measurements are accurate then your final front measurement should have been 43" to get 1/4 " tow in.
@DirtRoadLife1 Жыл бұрын
I’ll take your word for it cause I don’t have time to rewatch it right now lol highly possible though
@whelmo14 Жыл бұрын
@@DirtRoadLife1 I actually have to line up my front wheels and your video has helped me. I think what I will do is measure the front tires the same way that you did. Ill then take those numbers and find the middle. Ill put a mark on the front of the tire and then move the tire in or out until I hit center and then go 1/4 inch in.
@DirtRoadLife1 Жыл бұрын
@@whelmo14 that sounds like a great way to do it!!
@jolkraeremeark69492 ай бұрын
I searched "camel tow" and this vid came up....
@DirtRoadLife12 ай бұрын
@@jolkraeremeark6949 hahahahaha 😂
@QuickTrickTools2 жыл бұрын
We have a kit for that but you did a great job on your own!!
@DirtRoadLife12 жыл бұрын
Just checked you guys out! Slick products for sure. If i end up buying from you guys for future projects I'll feature it in a vid! Thanks for stopping by!
@jonathanlemaitre8354 Жыл бұрын
set caster camber then toe is set last
@DirtRoadLife1 Жыл бұрын
Did not know it mattered but appreciate the info and will know that for next time
@YMF1891 Жыл бұрын
This was a very helpful video. Subscribed.
@DirtRoadLife1 Жыл бұрын
Glad the video helped! And I really appreciate the comment. Thanks for subbing, YMF!
@herbal85582 жыл бұрын
Hay kak,hadir menyimak kak.salam sehat sukses,n suport full
@Floridawoodsbanshee8 ай бұрын
Is that manure on the front left tire? This video was very helpful. I have new A ARMS and will need to re align the front of my bike. Thanks for sharing 👍
@DirtRoadLife18 ай бұрын
Haha more than likely yes it was manure. Glad I could help, banchee!
@dannyb89555 ай бұрын
Thanks for the video! You have to use string or a method to square your front wheels to your back wheels before you can set total toe.
@DirtRoadLife15 ай бұрын
The string doesn’t always work I feel. It’s hard with how knobby some tires are on the sides. Also, a lot of bikes come with different size tires and wheels front to rear and people get the same size when they upgrade. So the rear tires are offset from the front.
@dannyb89555 ай бұрын
Correct. If the wheels are offset or wider front/rear, you just subtract the difference or add the difference depending on the position. Not hammering your video, just pointing out the 4 wheels need to be squared before setting your toe. Thanks for your time putting the video together!
@DirtRoadLife15 ай бұрын
@@dannyb8955 makes sense. I’ll have to try that method next time
@howdy459611 ай бұрын
Thank you ! I just installed the super atv a arms as well and it vers to the right now. But now thanks to you I have a project this weekend to do.
@DirtRoadLife111 ай бұрын
Let me know how you make out! Thanks for the comment howdy!
@howdy459610 ай бұрын
@@DirtRoadLife1 worked like a charm . Glad I watched the video. I didn't know what was going on and ride now power sports wanted to rape me with no lube .
@DirtRoadLife110 ай бұрын
@@howdy4596 perfect!! Glad it worked out and thanks for letting me know.
@jordannero1064 Жыл бұрын
Great video! Happen to notice you were passing Zack’s bar and grill! Cool to see someone local on here.
@DirtRoadLife1 Жыл бұрын
Appreciate that Jordan! Yes sir I’m from Caton/Pine City area, how about yourself? You ride sxs or atv or what? -Chris
@jordannero1064 Жыл бұрын
@@DirtRoadLife1 I’m over on the PA side in Wells township! Ride SxS and Sled.
@DirtRoadLife1 Жыл бұрын
@@jordannero1064 awesome man. Hopefully run into you at some point here we ride sxs a lot by the state line