UV Resin Snowman Charm: Beginner friendly project | Holiday Gift Idea

Simple and easy resin project; great for beginners!
Buy me a cup of "resin" to help me support this channel: ko-fi.com/amymade
Instagram: @emii.alchemii
Tiktok: @amymadee
[e-mail]
My Shop: www.emiialchem...
IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: • RESIN SAFETY | Importa...
Affiliate links are marked with ✦. If you use my affiliate links, I get a small commission to help support my channel at no cost to you.
✦Round bezel frame: amzn.to/31T51nw
✦Resin Tape: amzn.to/3s1FjZ9
✦UV resin:
-Kneadable eraser: www.jetpens.co...
✦Kneadable eraser: amzn.to/31OFFrs
✦UV-LED resin:www.emiialchem...
Why do I use two different types of resin in my projects?
I use a casting resin to cast and a doming resin for doming.
Casting resin is usually low in viscosity and works very well in molds without much issue with the bubbles. Also the low viscosity will allow the resin to reach detailed area of the mold. Doming resin is thick in viscosity and holds its shape very nicely. It creates a full dome and tends to hold the surface tension much better than low viscosity resin. So lower risk of the resin dripping off the sides. It also gives the piece a smooth, flawless finish.
Videos for Resin Beginners:
Part 1 • Everything You Need to...
Part 2 • How to Measure and Mix...
Part 3 • How to Dome with Resin...
How to Fill and Seal Shaker Charms: • How to Seal & Fill Liq...
BGM: www.epidemicsound.com

[@AmyMade]

You can use air dry clay for the snow instead of the kneadable eraser!

[@ms.d6857]

I have never heard of the kneadable eraser, but I will look for it. I have used spackle before to make clouds. I will try this. Thank you!

[@ms.d6857]

Oh, is the kneadable eraser located usually where the polymer clay is?

[@starlaw3320]

I watch your videos multiple times over the years because I always feel like I forget something. Your tips are amazing, you are so creative. Also, you could never 'talk too much' because your points are important. Thank you so much! I just researched a few shaker charm videos. Very helpful.

[@milimilita08]

Demasiado, pero demasiado, hermoso... Dios bendiga tus manos 🙏🏻✨🤲🏻💓

[@vanessacouch8419]

This is so cute! Great job!

[@romonamorrow7296]

Very pretty!

[@Microplancakes]

So cute!! I made very similar tree decorations last year, but with epoxy resin. It takes longer but turns out just as good! I like the idea of seasonal key chains too!!

[@potathoe1170]

Ah so cute. Love the chill vibes.(No pun intended)

[@WeblightDreams]

Very cute. Just found your channel, it was recommended by a friend. Hoping to try resin.

[@sarahmallonee]

Beautiful work

[@jobaker2960]

So cute!❤️⛄️❤️

[@Frouza21]

This looks so cute! Gj

[@ms.d6857]

Beautiful

[@anumghulam6963]

Sooooooooo cuteeeeeeee!!!!

[@terrirobinson3876]

OMGosh! So cute!

[@lydiaaclarkee1924]

Its so gorgeous your incredibly talented 💗

[@lindatoews5265]

Just darling!

[@nonisnest9718]

Adorable

[@Gabbyy015]

Such a cute charm!! 😁

[@BB.halo_heir]

Tootooamy is back! Did you see? Going to watch her video now. I had recently asked you about her, funny.

[@SavvyStardust]

Super cute!!

[@JustCallMeMeghan]

So cute!!!

[@trishajanecreates]

Very cute😊

[@cherylfelton4030]

Too cute!!!! ❤️❤️❤️

[@Danielle33384]

I love it!

[@awatt6088]

Can you hold a piece with your gloved hand under the UV light or is that unsafe? I sometimes have rough edges and needed to hold it up after putting resin.

[@awatt6088]

Trying to find what UV resin you use. Can you use that one for doming too?

[@NemoCat20]

I love this! So simple and cute. :) Gotta try it sometime! Curious question - why do you have tape on your pliers at the end?

[@AmyMade]

Thank you! The tape is so that I don’t scratch the findings!

[@NemoCat20]

@@AmyMade So smart! I need to do that. Thanks so much! 😊

[@chocolatenailbar-adiynailc9767]

You made it look so easy! Are there kits for a novice to buy?

[@AmyMade]

Thank you. I don’t think such kit exist. You would need to purchase each supply

[@glitteringwaxbutterfly450]

What do you use to spread your resin? I’ve seen you use a toothpick but also a white pointed little tool. It’s the white pointed tool, I was wondering what it is.

[@AmyMade]

It’s a plastic resin tool I sell in my shop!

[@Kuragari562]

I wanted to ask what the sheets are that you put the resin on to add glitter? thanks!

[@AmyMade]

They’re just cut out pieces of plastic folders