sir, thank you so much today we purchased Rs.3500 from Girias, but salesman don't know to assemble the partstomarrow i will try, thanks once again ,
@j777-vh9rfАй бұрын
I purchased it for ₹2900 and assembled myself. Great help after watching your video.
@sanju23866 ай бұрын
Hi bro,I have assemble the same fan seeing your video , how to stop fan from oscillating , I even pulled lever . Any suggestion ?
@CleanReview6 ай бұрын
Try tightening lever like a screw to fit properly and then try pulling or pushing
@akashmaitra49526 ай бұрын
Is screw driver available in the package?
@CleanReview6 ай бұрын
No
@punithgowda81075 ай бұрын
What the heck 😂
@techiecela25015 ай бұрын
I purchased for rs .2600. Your video is very helpful for setting this.thankyou
@ShlokSingh-k9v8 күн бұрын
how to disassemble this? i m stuck at the rotor blade, cant seem to get it out. pls help
@CleanReview7 күн бұрын
There will be knob on top of rotor blade, try to rotate in clockwise direction (opposite to usual way) to remove it.
@ShlokSingh-k9v6 күн бұрын
@@CleanReview i've done that, but the blade wont come off
@ShlokSingh-k9v6 күн бұрын
@@CleanReview nvm got it thanks. i just needed to pull harder
@sekhartony89677 ай бұрын
Is this noise is too much,and what about power consumption??❤
@CleanReview7 ай бұрын
Noise level is low to medium (depending on speed level). If you use for 8hrs at high speed approximately 2units of power is consumed.
@sekhartony89677 ай бұрын
@@CleanReview thank you bro ,and any double door refrigerator under 23000
@CleanReview7 ай бұрын
Check this : www.samsung.com/in/refrigerators/double-door/rt3500mh-digital-inverter-technology-236l-titanium-silver-rt28c3032gs-hl/ I will add few links from other brands here
@Mju98 Жыл бұрын
Hi bro. How to pull up the inner steel pipe for height adjustment. Cant able to pull up
@CleanReview Жыл бұрын
Hi , At starting it will be little bit tight , Can you try applying some soap or oil around edges from outside and try pulling up .
@Mju98 Жыл бұрын
Yes. I assembled. Speed is okay. But noise is high. While using Flipkart refund option I only get the replacement option. Can I replace this and get other model of v guard?
@CleanReview Жыл бұрын
Yes you can try replacement, Fan which I assembled not getting much noise.
@kumarisimran18574 ай бұрын
I am facing same issues I tried a lot but it's not opening
@sumitchowdhury1524 ай бұрын
Is the fan leaf 🌿 made of plastic or metal?
@CleanReview4 ай бұрын
Plastic
@priyankamadhavan69457 ай бұрын
I couldn't loose/remove the small screw can you tell me how to loosen it
@CleanReview7 ай бұрын
Which Screw you are referring to? small and large black holders?
@hussainshaikh9236 ай бұрын
any suggestion to lower the speed of the fan at number 1 only
@CleanReview6 ай бұрын
That's not possible
@salmanshaik49015 ай бұрын
Thanks bro,,, it was helpful.. you saved me from heat today
@alkaraj32564 ай бұрын
Please someone tell me whether this stand fan can be used as a table fan.
@CleanReview4 ай бұрын
No, this fan height will be suitable for placing near sofa or near bed . If you are looking to use this while sitting on floor or sleeping on floor , then this is not best.
@_Al_win_9 ай бұрын
What is the condition now? Is it good?
@CleanReview9 ай бұрын
Yes , It's good . No issues so far
@MamtajHulagur-u5s6 ай бұрын
Thank you for your suggestion
@akilans76033 ай бұрын
Thanks lot. I was searching this installation video
@sowmyas7113 Жыл бұрын
Thank you pavan . This saved my day💥
@sanjay14128 ай бұрын
Hi my standing fan head doesnt bend how do i fix ir
@CleanReview8 ай бұрын
There will be a screw on one side below fan housing. This screw will help in bending fan by loosening it . Tighten it back after adjusting.
@sanjay14128 ай бұрын
@@CleanReview tried loosening it and tighten it but still goes up again.Btw this is a new standing fan
@CleanReview8 ай бұрын
Then you can try replacement if you had purchased through online .
@koikaamkani7 ай бұрын
Which fan is good 1350rpm or 2100rpm?
@CleanReview7 ай бұрын
If you want very low noise and medium air delivery go with 1350rpm. In 2100rpm , noise is medium at high speed but air delivery will be much better than 1350rpm.
@sreejithkm46878 ай бұрын
Cord wire length?
@CleanReview8 ай бұрын
1.5m
@aparnamohan50026 ай бұрын
Thanks
@raosahebkhedkar29645 ай бұрын
Thank you 🙏
@azfarhussain36807 ай бұрын
Thank ❤❤❤❤❤
@debajyotimondal93294 ай бұрын
Is round Base plastic or metal ?
@CleanReview4 ай бұрын
Base internally made of some hard high dense material and covered with ABS plastic
@kaushiksarkar15162 ай бұрын
How to stop oscilation any one can say ......
@CleanReview2 ай бұрын
Pull up knob on top of motor to stop oscillation 03:16
@kaushiksarkar15162 ай бұрын
Thank u for ur reply , I did this same but can't stop _ V guard esfera STS N
@CleanReview2 ай бұрын
@@kaushiksarkar1516 try removing knob by loosing it and tighten it back
@teentoon57258 ай бұрын
Fan leaf plastic or metal
@CleanReview8 ай бұрын
Plastic
@ankiethd4257 Жыл бұрын
Thanks for the video
@TheMohitWrites4 ай бұрын
dude that ring does't get tight at all, that screw just comes out. Don't know how to fix it
@CleanReview4 ай бұрын
Ring that used to join two metal frames?
@jerinafernandes74266 ай бұрын
Thanks it was useful
@imsoldier-de6ki8 ай бұрын
Fan rotating not stoped
@CleanReview7 ай бұрын
Did you tried pulling or pushing knob which is available back side above motor unit?
@sibinss11766 ай бұрын
Same issue@@subhajitnayek7267
@SubhadipDas-c3j6 ай бұрын
Same
@ShekharDigal-xi7fk6 ай бұрын
Bruh it's working u hv to pull up backside rotating knobs 😅😂 but fan speed not upto the mark okk noise level is medium ...
@thalathotitharunprabhakar3390 Жыл бұрын
Thank you for the video.
@Onlydesiindia6 ай бұрын
I purchased for 2350😂
@GareeBoooo05 ай бұрын
How bro ?
@PiyushKumar-ge8hs4 ай бұрын
Working good ??? Want to buy
@bkmstories51028 ай бұрын
❤
@vinothv89714 ай бұрын
🙏🙏
@ajaycshetty18376 ай бұрын
Much helpful❤
@MrShibnath826 ай бұрын
Thank you!!!🙏
@SubhadipDas-c3j6 ай бұрын
Bro rotating problem
@CleanReview6 ай бұрын
Is pulling back side knob not working?
@SubhadipDas-c3j6 ай бұрын
@@CleanReview twice pulling or pushing it's working
@kevin88fern Жыл бұрын
Helpful video 👍
@MogalKB3 ай бұрын
I purches today flipkart 2490 rupees
@slucky874610 ай бұрын
Nice
@SagarikaSahoo-sp2oj5 ай бұрын
Wrong fitting
@georgethormer4586 Жыл бұрын
⭐ Promo'SM
@bishalmondolyt14677 күн бұрын
Tur mayki r buss
@ysrnominee3 ай бұрын
Bro fan is speed is not at all good
@CleanReview3 ай бұрын
In V guard pedestal fans this is only fan with high speed capacity (2100) . Other v guard pedestal fans comes with lower speeds.