V6 Car Engine Complete Tutorial SolidWorks 2021 STEP by STEP, Advanced Assembly

Hello friends, and welcome back on my channel, in this video will make all the components for a V6 Car Engine and then will assembly all of them and will syncronize the belt wheels with the shafts.
Good Luck :)
If you want to see the tutorials for each component separately I have the links for them below.
I hope I am helping you with this videos to learn SolidWorks faster! If you have any parts like this and you want a tutorial about them, leave a comment, and I will answer you as fast as I can :D
Thank you for watching, and I hope to see you in the next videooo :D see you!
And if you want to support me, you can leave a like/share or subscribe :D
1) CrankShaft: • V6 Engine CrankShaft S...
2) Piston: • Piston V6 Engine Solid...
3) Engine Block: • V6 Engine Block SolidW...
4) Rocker Arm: • Rocker Arm V6 Engine S...
5) Cylinder Head: • Cylinder Head V6 Engin...
6) Exhaust Manifold: • Exhaust Manifold V6 En...
7) Air Filter: • Air Filter V6 Engine S...
8) Cam Shaft: • Cam Shaft V6 Engine So...
9) Rocker Spring and Valve: • Rocker Spring and Valv...
10) Belt Wheels: • Belt Wheels V6 Engine ...
11) Valves Cover: • Valves Cover V6 Engine...
12) Front Cover: • Front Cover V6 Engine ...
13) Oil Pan: • Oil Pan V6 Engine Soli...
14) Air Turbo: • Air Turbo V6 Engine So...
15) Intake Manifold: • Intake Manifold V6 Eng...
16) Bushings and Cam Shaft retainer: • Bushings and Camshaft ...
Assembly
17) Lower Block Assembly: • Lower Block Assembly V...
18) Upper Block Assembly: • Upper Block Assembly V...
19) Last Components & Conection of the Shafts with the Belt Wheels • Shafts & Wheels Connec...
Here is my Facebook page where I am posting some of the drawings that I am using for my videos :) I will try to upload drawings every Sunday for the previous week.
/ alexs-engineering-1146...
#SolidWorks #CADCam #V6EngineSolidWorks
Sharing is Caring, any support is welcome www.tipeeestream.com/alexxx8/...
-How to activate "Dynamic mirror entities" see in this Tutorial:
• SolidWorks Double Bear...
-How to limit Movement in Assembly:
• How to LIMIT the MOVEM...
-How to make a MOLD:
• How to make a MOLD in ...
-How to use BELT/CHAIN command:
• How to use BELT/CHAIN ...
-How to make EXPLODE VIEW:
• Explode View!! SolidWo...
-How to use AUTOTARCE :
• How to use AUTOTRACE t...
-How to Engrave a Picture on a Sphere:
• How to ENGRAVE a PICTU...
-How to Install SolidWorks 2021: gestyy.com/eiUvDD
Download drawings from here: www.pinterest.es/SolidWorks_D...

[@Asphalt209]

Thank you so much for this tutorial. this has been so much fun. It will be awesome to go through other types of engines in the future hopefully. Take care!

[@AlexsEngineering]

You're welcome, good luck

[@vaasugarg4222]

To anyone who is following the video he makes a mistake in the crankshaft which he discusses later. He says that at 3:26:47

[@unfriendlyMob]

Thank you very much for this amazing and detailed tutorial. this was my first time with something like this but you explained and showed everything so well that even a beginner like me could make something cool like this! wishing you many great things in the future!!!

[@AlexsEngineering]

Thank you, good luck 🤗

[@yousafhassan4588]

FANTASTICS WORK PLEASE KEEP ON UPLOADING VIDEOS LIKE THIS

[@AlexsEngineering]

Thank you, I will try 🙂

[@gabekoenig6552]

Never touched solidworks till this week. Working through your video, super helpful

[@AlexsEngineering]

Good luck, I suggest you to start with something easier if it's your first time

[@dwihangga4057]

thank u so much! u help many students

[@AlexsEngineering]

Thank you 🤗

[@bharatsoni6462]

You are amazing. I Loved your content. I make v6 engine from your video.😍

[@AlexsEngineering]

Thank you and good luck

[@yazeed5471]

Bro you are so good , you have a great way of explaining things and you did a great job building this Engine. i just have one request , if you can add the sketches to each part and the dimensions in a file that would be awesome.

[@AlexsEngineering]

thank you, for drawings use the link in the description of the video

[@hajeevali1928]

Thank you so..... So much... 🙏🙏 iam searching For this drawings from last 7 days... But I got Drawings after watching your video.... Thank you sir... ❤

[@AlexsEngineering]

Most welcome 😊

[@hajeevali1928]

@@AlexsEngineering sir, may you please provide Drawings for air turbo.. ?

[@AlexsEngineering]

@@hajeevali1928 I am afraid that I don't have it

[@charlespeter8881]

amazing ！

[@AlexsEngineering]

Thank you :)

[@lamtran2993]

Just my suggestion. You should divide this video into shorter videos, each video will demonstrate the creation of a part of the engine. Then combine all of them into the one single playlist. BTW, I love your tutorials. Very detailed and clear. Learn a lot from your videos.

[@AlexsEngineering]

Thank you, but I already did this, I have a playlist, check the description of the tutorial, I have links for all the components there 🤗

[@shansultan1995]

amazing sir😘😘😘😘

[@AlexsEngineering]

Thank you :)

[@abhishekbhamare4002]

bruh , 0:1 sounds like - " hello everybody and don't come back on channel "😂😂😂😂 btw nice tutorial . thank you

[@jeslie_mathew]

Unable to create contour geometry, please check the loft section. This shows while patterning , in cylinder head 1:23:12

[@bullock4754]

Activate geometry pattern

[@vishalashdev8132]

convert the circular edge to a circle in 2 different sketches (1 sketch for each circle) then do loft cut and instead of selecting the edge, select the converted sketch, then you'll get an option for open loop or closed loop, select closed loop. Then you'll be able to pattern your loft cut......activating geometry pattern didn't work for me but this method did

[@lorenzmarcremedios8406]

thankyouuuu @@bullock4754

[@Allenmec]

Make you you have activate the "Geometry pattern" in the linear pattern settings. It's under options.

[@toxicnoah2320]

Very Good!!!!!

[@AlexsEngineering]

Thank you! Cheers!

[@foremostslayer7757]

osm bro

[@ahmeteneren3478]

This might be your crown jewel.

[@AlexsEngineering]

Thank you :)

[@ahmedsedky7271]

Thank you alex for the video, it was really helpful :). I just have a problem with inserting bolts that connects the camshaft retainer and the cylinder head, do you know which exact bolt to use ?

[@AlexsEngineering]

You're welcome, I don't remember exactly what bolts you should use

[@2706sol]

Thank u so much, alex. I would like to know if it's possible to have the original files so I can compare what i did and yours it would help a lot to continue learning. Again thanks bro, greetings from Mexico

[@AlexsEngineering]

You're welcome, I don't have the files anymore, the video has already more than 1 year. Good luck

[@ivanbaranoff]

Hello! thnak you for your videos! Are the hoses hollow or not? On your video it looks like it ishollow. In my case it is not hollow. how can i fix this?

[@AlexsEngineering]

hello, yes they are hollow, if in your case are not hollow, I think you didn't follow the video carefully, at both ends of the spline, you must have a sketch with 2 circles 1 for the inner diameter of the hose and 1 for the outer diameter of the hose, and this way you will have your hoses hollow.

[@GoVIT4L]

hi! before i start this will i need the toolbox add on in solidworks? as i havent got this! thanks!

[@AlexsEngineering]

Not necessarily, but you should add it for future projects

[@ketanpatil7099]

Hello I can't do changes in crankshaft what can I do plz help

[@ximenamedinaalbarran8481]

my crank shaft does not move after i apply the cilinder head, how do i fix it? the pistons are all flexible

[@nikhil_15]

Crankshaft rotates when only a single piston mate with but does not rotate after the 2 and more piston mates. Help me get our of this problem

[@user-ez9zg8vh1d]

Hi, quick question on the assembly. At 3:29:12, I followed your step to make the piston assembly flexible, but when I tried to rotate the crank shaft it says that the component is fulled defined and therefore cannot be moved. Any idea?

[@Allenmec]

I too face the same problem. I then had to manually import part and done the mates 1 by 1.

[@azash_omar]

Amazing 😍 Are a an expert of SOLIDWORKS mechanical design? I mean did you obtain that certification?

[@AlexsEngineering]

thank you, no

[@azash_omar]

@@AlexsEngineering just wow 😯 If it is possible please share the drawings of the engine so that I can practice is it as well Thanks in advance

[@hanifvohra1385]

Can you upload all the individual files ?

[@jamilsouri4535]

The new solidworks 2021 is causing an issue with using the Rib feature. Keeps asking for part to do Rib on but nothing works.....

[@thedemon6756]

Thank you for this video it is amazing. Please I have one question, Are these dimensions based on true dimensioning ?

[@AlexsEngineering]

You're welcome, I don't know, I have them from someone else

[@willardwhite3796]

The Manifold Intake is not joined correctly, it seems, between the central Extrude/Boss and around the pipes

[@ximenamedinaalbarran8481]

Why my right plane or front plane from my motor block is not with that angle, it’s rect, it doesn’t work when I try to apply the coincide

[@habibaarshad1642]

hey alex, I encountered a problem during lower block assembly where when I try to rotate the crankshaft the whole engine block rotates too!! How can I fix this?

[@AlexsEngineering]

Try to add another mate to fix it, or just right click on it and select "Fix"

[@ericmariovijaay1717]

i m having a problem is exhaust mainfold sir . pls help . the bottom part and the part that connects the cylinder to the exhaust isn't been placed correctly in the gaps sir . pls help

[@lukefenlon6829]

How do you find the measurements for the components of the engine

[@Dhenz18]

May I ask you a question, sir why my counterbore does not match with the model I did (it's just like a needle on the counterbore) I follow all the steps you did..what would be the possible reason why I got this trouble. Thank you for your respective response.

[@AlexsEngineering]

I need you to tell me the exact time in video so I can see it better, to give you a proper answer

[@Dhenz18]

Sir, it's 32:03, the counterbore of mine is too small but I did the same settings you did but the output is too small.

[@Dhenz18]

May I ask if what unit you are using sir?

[@AlexsEngineering]

@@Dhenz18 I am not sure what the problem is, but you can try again, maybe it will works, because sometimes you make a small mistake

[@AlexsEngineering]

@@Dhenz18 MM

[@sukhsehajsingh3216]

while applying the mates between rocker arm and spring after first one done correctly, it shows error, sometimes overdefined sometime error related to limit distance mate between spring and cylinder head

[@hiphopnaveen448]

Yes ...

[@ximenamedinaalbarran8481]

Same here, what did do you?

[@marvinbhuminpatel4405]

I am not able to set the "cam forward mate" at 3:48:09 I am not able to see any cam icon

[@AlexsEngineering]

If you will go to - Mate - mechanical mate - you should find there "Cam" , everything is explained in the video

[@christianrobles4976]

oye tendrasn el pdf de las pieza para tener una mejor gia por fa

[@kennethmarcellana2208]

Good day, do you have a drawing for each part of this engine? Thank you

[@AlexsEngineering]

for almost all the parts, check the link in the description of the video

[@mesammehdi4428]

1:24:10 My solidworks say's "Unable to creat contour geometry. Please check the loft section." Please Help.

[@ahmedosama7781]

+1

[@savannaking305]

MAAKE SURE TO CHECK THE GEOMTRY PATTERN

[@abhishekbhamare4002]

Same here

[@temidayooluwabunmi413]

Hi thank you so much. Do you know where I can get your dimensions?

[@AlexsEngineering]

The link in the description

[@hanifarsalan4743]

​@@AlexsEngineeringthere is nothing in the link

[@vinutanudbal]

Cannot knit sheets together pls solve

[@zontagshadow7662]

Are all the dimensions based on real life engine? Also, are those mm or m?

[@AlexsEngineering]

The dimensions are just for practice, and are in mm, how can it be in m?

[@zontagshadow7662]

@@AlexsEngineering thank you for your reply. I am doing a project and I need am engind. But i simply cannot find a real life proengine with all the necessary dimensions. Vould you please help me with some advice?

[@AlexsEngineering]

Sorry for the late reply, this is the only engine I made, so I don't know how can I help you

[@user-rr3kk1vi7d]

Thank you for your project. From what car is this engine?

[@AlexsEngineering]

You're welcome, I don't know from what car is this, is just for learning purpose only, not for manufacturing

[@tanmayborse8548]

I have a problem the rocker arm wheel and cam shaft are offset so we can't do the cam mate please help us with that's

[@AlexsEngineering]

You can send me a picture with the problem on my email or on the facebook page to see what's that about, sorry for the late reply

[@tanmayborse8548]

@@AlexsEngineering thanks for the reply but I got the solution and the engine is done already

[@enjyali3359]

@@tanmayborse8548 could you tell me the solution I'm facing the same problem

[@quentinpietrzak3945]

@@enjyali3359 did you have the solutions now?

[@normanny7760]

@29.45 why is it 19.5 it should be 19.05 right?

[@AlexsEngineering]

I think the mistake is in the drawing there, but if you compare it to the part before, to the arm, you will see that 19.5 is the right dimension, try to pay attention and at the parts before and you will find the right dimensions, good luck.

[@hanifvohra1385]

When ever I create hole there is middle part which always stays

[@AlexsEngineering]

At what minute is that in the video?

[@justforme268]

What vehicles is this used on?

[@AlexsEngineering]

not sure

[@skytwink699]

Il a inverser les poulie de distrib du vilebrequin et des arbres à cames

[@barayousif9971]

how many litres are in this engine?

[@AlexsEngineering]

No idea, this is just for practice

[@normanny7760]

@29.12 how the depth is 24.13 mm

[@AlexsEngineering]

You take the dimension from the part before this one, from the arm

[@vaasugarg4222]

People who are following this on fusion please don't follow the video at 3:47:56 because the motion can't be yet made easily in fusion . kzbin.info/www/bejne/amTFaGWqrLaorpY. You can follow this video for this part

[@claudiuvacean5960]

Salut. Nu te supara. As dori sa te intreb niste lucruri legate de motor. Imi poti spune, te rog, cum as putea sa te contactez? mersi

[@AlexsEngineering]

salut, intra pe pagina de Facebook si imi poti da mesaj acolo, sau pe email

[@mauriciohernandezdelrazo9025]

Would you share your plans with me?

[@AlexsEngineering]

check the description, I added a link there

[@user-cv1rs6gw9p]

Unable to find drawings , please help.

[@AlexsEngineering]

Look in the description of the video

[@user-cv1rs6gw9p]

@@AlexsEngineering That link isn't working

[@4Ddraftsman]

your spring is not deformed

[@AlexsEngineering]

I know, I don't think my pc can work properly with all of those springs deforming and everything

[@rohithvj]

please share the 2d drawing

[@AlexsEngineering]

use the link in the description of the video

[@w.binder-freecadchannel]

Why did you do it again In a 4 hour video?

[@rheinhardt2510]

step by step

[@w.binder-freecadchannel]

@@rheinhardt2510 Alex drew this a few months ago, but one part - a video.

[@rheinhardt2510]

@@w.binder-freecadchannel nice work

[@AlexsEngineering]

Because maybe somebody want to see it like this :D and because I don't have so much time these days to make an tutorial every day like before :)

[@rheinhardt2510]

@@AlexsEngineering tutorials like this with a lot parts and assembly are always welcome

[@salahmammeri6311]

46:00 I can't do rib feature

[@ashwinbala3998]

Iam also having these problem. There is another option "selected object" . How to solve it

[@lordmongoose6236]

This is unbelievable unrealistic! I wonder if any of these so-called ‘SolidWorks engineers’ have any real knowledge or that they just copy this type of assemblies from each other. They all use the same dimensions for the part and none of them have the actual drive belt construction that moves the valves. Was that part too hard?

[@AlexsEngineering]

And if I put the belt will be more realistic? With this kind of videos I show you how to USE SolidWorks, I am NOT showing you how to make a real engine here, if you have all the dimensions for a real engine, you can follow this video to help you to modelate it in SolidWorks, and that's it.

[@lordmongoose6236]

@@AlexsEngineering I must have struck a nerve. Sorry for that. It would be more realistic if the cam shafts were connected to the belt wheels which are now just floating around. I have seen at least 4 KZbin channels which are just copying from each other using the exact same model. In my opinion no original designing has been done. Why is no one making that extra effort?

[@hanifvohra1385]

Can you upload all the individual files ?

[@AlexsEngineering]

To upload them where?

[@hanifvohra1385]

@@AlexsEngineering google drive