SolidWorks Tutorial

sw-tc.net/ solidworks tutorial 274 wankel engine (an example of using the eccentric shaft) , also this tutorial will introduce the time saving method with using the block-sketches!
See the exact engine explained (by eng. explained) here: ► • How Rotary Engines Wor...
-M. wankel will return to production in 2019
-Calculations & sketches done by sw-tc based on Mazda wankel engine for educational purposes.
►Engine 2 will be completed on:► • Engine 2 project
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

[@csbr75]

For those wondering: the blue spur gear in the assembly *MUST BE FIXED* in order for the gearing mate to work. In case you don't fix it there's a good chance the rotor will not do what's intented to do If you're using a newer version of Solidworks (I think 2019 or newer) you can use the "Rotate Part" with Collision Detection box checked to fine ajust the spur's position The other relations used to align rotors and shaft with the Right Plane are solely for position referencing and not actual movement restriction

[@javiersebastianguardadolop3820]

love u beutiful, thank u

[@sameernaik2844]

Thankyou for the detailed model and it's really helpful how you always mention the dimensions in a way it's clear for an audience to verify while drafting...could you please share the drawings of all parts with dimensions and different views!!

[@Aleksander_W]

Presentation of the finished model by me.😀 Additionally, animation and renderings. kzbin.info/www/bejne/pmfbh4OdmberbpIfeature=shared

[@Matt_VSute]

58:50 Housing 1 1:51:41 Housing 2 2:19:30 Gaskets 2:21:20 Retaining Boss Plate 2:28:40 All Rotor Parts 2:50:35 Sparkplug 3:54:46 Major Assembly

[@francy01]

YOU ARE THE BRO

[@mayonnaisetheinstrument4305]

do you have the blueprints for all that stuff? i wanna try it myself

[@tiims_tv9258]

i would really like to do it by myself too!!! Please put the prints befor each piece, that´d be great

[@cstavro]

It looks like it's loosely based on the 13B. This is NOT a working engine. The Wankel rotor housing is not obround...it's trochoidal! It doesn't even have the correct spark plugs. Surely much easier to model for the sake of this video. You can find actual equations in "Rotary Engine" by Yamamoto.

[@yushanchen4193]

Wait is it? Then how do you find the actual dimensions

[@zafosinferno888]

@@yushanchen4193 just google Yamamoto Rotary engine PDF. But be aware, they are very advanced mathematical equations.

[@zafosinferno888]

And thought the engine is not using Epitrochoidal equations, which in my opinion are not that hard to use, it's still going to work. Check out the OS rotary rc engine which utilizes the give of the apex seals to make up for the lack of exact rotor/housing shape. Yes it won't be as efficient but it will run. Cheers ;)

[@ionuttatar]

can you tell me from where you get the dimensions for your models?

[@afonsovieira3071]

I would like it too ! Good job by vídeo!

[@magnumfire313]

I love how complex and yet simple Wenkel engine is.

[@3DMazine_Projetos]

Muito bom.existe uma pequena diferença entre o excêntrico do virabrequim =15mm e o par de engrenagens=14,875mm .A curva epitrocoidal deveria ser feito por equação . show

[@pk6336158]

Where did you obtain the dimensions? Thank you very much for making this video and all your videos. Don't Stop.

[@rajakeerthani6925]

Can we get the pdf of the each part draftings so it be easy for understanding more about the dimensions to try this, It will be of great help if you share so

[@swastikgrover3414]

u could have shown the mates.. I'm pretty sure theres a tangent mate at 2:46 but we never see it. Like come on???

[@swastikgrover3414]

why did you make a cut in the video at 1:30:00 !!!!!!!!, i have no idea how tf to make that cylinder and you skipped past it!!

[@RixtronixLAB]

Nice video shot, thanks for sharing it with us, well done :)

[@kailashsingh9737]

Very beautiful sweet sir

[@369melo]

I followed all the process and I can't mate the small gear with the rotor gear yet. Can anybody help me? 4:16:00

[@wellingtonmurugan8537]

Fix the spur gear on front and back side it is working

[@catkeys6911]

This was very hard to follow because it's too blurry to read many of the input values. Interesting, but very poor quality video. I stopped at 1:06, because this was just WAY too much work trying to guess all the values I couldn't read, then reworking my sketches, then trying again, etc., etc. Thumb DOWN on this one.

[@dcprice1200]

Is it possible to test design modifications to magnify efficiency?

[@erwinwizzy]

Could you tell us where you get all the plans, drawings, layouts from??? Please... I see a lot of people asking and no reply. Trying to follow your tutorials from a smartphone display is hard task...

[@YungDarron]

It's on a website called grabcad

[@khaikazama491]

how many parts are there?

[@johnwalker7861]

Please, It would be possible to have the measurements of the crankshaft to be able to model an engine with 4 cylinders?

[@MarkGongo]

Amazing masterpiece!

[@WishASupra]

Where do you get the blueprints? If we would like to do it on our own for a start?

[@Sw-tcNet]

Thnks4comment. We don't provide blueprints "since they belong only to us", and that is the aim of this channel, to provide learning step-by-step tutorials" to watch instead.

[@lq_12]

Is there a video playlist of both components and assembly for the Wankel engine??

[@tugayerylmaz7076]

I draw Wenkel Engine from your videos but in the rod cap part which mean (9.22-11,52 minutes belong) from your videos. I cant fillet at the end. Program says 'a common corner of the selected faces/edges is too complex. Try to fillet one face/edge at a time. Please can you help me ? I draw just as you

[@yushanchen4193]

Can you show the relations in the sketches please?

[@xBlackThoughts]

And again.....these "jumps" in the video are unnecessary and just irritating!

[@w3dprint-impressao3d52]

E pensar que fiz um Wankel todo a partir de imagens de referência, até que não estou tão mau. Já até imprimi parte dele, o resultado está no meu canal!

[@BasicSteam7]

What rotary is this? A 13B? And would you say this is accurate enough for machining into an actual engine? Thanks so much! Looks great!

[@sameernaik2844]

The dimensions mostly resembles 13A

[@swastikgrover3414]

definitely not for machining, you can see him adjusting many dimensions on the way. Just a model, not precise

[@robertopiozzi230]

I need a 2D of the eccentric shaft😭😭

[@gabrielsantiago234]

I’m having trouble with the final assembly, I mate the gears correctly but the rotor doesn’t snap into place inside the housing/the edges still pass through the block can someone help?

[@marialeboscan2316]

the same thing happens to me, could you solve it?

[@gabrielsantiago234]

hey, yea i did solve it, I found that the center gear the one on the outer housing needs to be mated in place so that it doesnt revolve around the accentric shaft, if you do that the rotor edges should follow the inside of the housing @@marialeboscan2316

[@Pwndaz]

Could you explain that again please? I'm having the same issue

[@MuratYldz-my7xd]

@@gabrielsantiago234 Could you help me also, the same problem happens to me:S

[@gabrielsantiago234]

@@Pwndaz The center gear (its blue 4:09:31) needs to be fixed so that it does not rotate. If you follow the instrustions correctly and line up the rotor (the triangle in the middle) it should spin around the center gear creating the correct movement and not going through the sides of the housing. RECAP: just make sure that center gear (the blue one) is FIXED in place (does not move)

[@phase-I]

Die Gehäuseform ist nicht korrekt! Durch die Drehbewegung der Eckpunkte des Kolbens entsteht eine epizykloide Gehäuseform. Dieses Video zeigt keine Konstruktion mit fachlichen Hintergrundwissen des Wankelmotor sondern nur die Bedienung des Programms.

[@alessandromalagoli1337]

How was the boss extrude 5 made in the rotor housing? In the video this feature was cut out

[@黃少遠-i6c]

GEAR 51:40 4:07:58 ------------ 54:49

[@SkyGreeD]

hii, i'm student on industial designer, where i can find all plan of the all part of this engine please ?

[@alessandromalagoli1337]

Can anyone send me the Solidworks files?

[@StankyKong911]

Could you list the materials?

[@haxlow5420]

I followed step by step your video for the crittical mates and is doesnt hold ... it works once then doesnt work ... thats so bad its frustrating not finishing it properly like you

[@waynejohn8]

Great video but would be so much better with an voiced audio explanation.

[@basrikizildenizli1056]

If you just started rebuiling this, just be prepared of getting no answers to any questions! 1:29:59 its amazing

[@karolmatoga7572]

yeah this is annoying

[@Genxpoppy]

Do you have right amount of teeth on yhem rotors and gears

[@ijabmrahman3511]

where can i get the drawing of these files?

[@carloseduardoferreiracamar7150]

Give a 2D drawing please

[@Alihankirt]

where is the technical drawing

[@supportrom6522]

I want to ask for wankel drawings

[@samarthbhaganagare4926]

From where did you take dimensions??

[@marialeboscan2316]

I’m having trouble with the final assembly, I mate the gears correctly but the rotor doesn’t snap into place inside the housing/the edges still pass through the block can someone help?

[@basrikizildenizli1056]

Just send me the Problem

[@minanaguib5242]

Try to position the rotor manually as its 3 edges touch the housing inner edge , then fix the spur gear (blue one) then it will be done

[@alessandromalagoli1337]

Hi! Were you able to finish the drawing? If so, could you send me the components you obtained?

[@claudiuvacean5960]

Hello. So this is the whole engine?

[@gifariii]

how did you get 2mm dimension at 18:54 ?

[@najemw.n8719]

Link to download pls

[@mohsenmousavi9597]

Is that ok if i download it?!

[@adalbertohernandez1341]

Estou aprendendo muito com esses tutoriais ( I'm learning a lot from these tutorials)

[@UCuJ60hvT4wZta0-X_0h_ESQ]

2:44:59

[@mysticcc8681]

learnt a lot from this video , thanks bottoms up

[@鈴木智仁-h4q]

today 2:21:24

[@ПавелВаулин-ч7я]

Thank you for your project. From what car is this engine?

[@dceu1256]

mazda rx series

[@samanfight7534]

where is pdf map?

[@hocvinguyen1895]

i had a touble when i try to create a hole wizard on the internal spur gear component but i trapped in the result was the hole wizard on wankel rotary component, can someone here help me to figure out my problem.

[@jmcowp4814]

lol i know this is VERY late but i created a new sketch on the plane of the gear and converted the holes and then did hole wizard and selected those components

[@ИванАндреев-у8т]

Hello! Do you do everything according to the drawings?

[@parasmandal]

how do you do?? new to solidworks

[@BKoldd]

it's amazing you be great when you draw complete this energy

[@mohsenmousavi9597]

Thankful 🙏🙏

[@haxlow5420]

Shit i dont have toolbox :/

[@pabloariasmoron8455]

completed lots of thanks

[@gosth81]

Where are the desing plans?

[@mixailsamsonnik6657]

18:54 be careful

[@karolmatoga7572]

how to solve it?

[@karolmatoga7572]

you have to convert elements from previos sketch (line which is 2 mm from line inside accentric shaft) in order to pin intelligent dimension to it

[@deadfish7595]

D3=45

[@rizqimaskenz]

Mantappp😍👌👍

[@serhatk.8801]

Why don't you show the materials

[@iamcrabgod2809]

Man ! Where do you live. You deserve so so much

[@DinhDang11.Nov.95]

I want to see you come back , with more and more design.

[@khaledalajmi9956]

Can you please tell me from where u got the dimensions? Thanks

[@stevepq7696]

Yeah some of the diemensions are correct

[@stevepq7696]

I have the exact diemensions

[@stevepq7696]

But not all

[@gabrielburhkarprangegonzal4995]

1:10:04

[@afruit6720]

Fortnite

[@MrHooneis]

Это очень перспективный двигатель. Возможно, наши потомки будут все на них ездить

[@luchkovalentin]

чем он лучше поршневого?

[@MrHooneis]

@@luchkovalentin Тем, что в нем энергия не расходуется на остановку поршня в верхней и нижней мёртвой точках

[@pablofelix8710]

Eu acredito que há um problema com o sistema de arrefecimento, não há nenhum fluxo de água para as condutas.

[@fifisan4141]

Thanks a lot for this initiative! I didn't manage to adjust the second rotation (the end of assembly ptB), so can you show me precisely what should I do ?!

[@marialeboscan2316]

the same thing happens to me, could you solve it?

[@fifisan4141]

@@marialeboscan2316 not yet, i don t have any idea about how to solve it, i made it correctly..

[@ΤεοΠετρα]

Which program is????

[@Sw-tcNet]

i get this question many times... Can you see "SolidWorks"? even the name of the channel as well! so why

[@ΤεοΠετρα]

I didn't know it and thanks

[@adalbertohernandez1341]

Muito Bom....(Very Good!!!!!)

[@vinhpham9241]

Where you get dismensinons the engine ? Can you give it for me ?Thank for if you agree 😃👍👍

[@stevepq7696]

Who are you can you do work for me?

[@basrikizildenizli1056]

Yes I can :-)

[@SaeedAzizi-yy2ts]

I fell in love with the design, montage and music of this video. it was very beautiful.

[@jnnatnicha]

Help make video tutorials nissan cam 16valve

[@rohantau7660]

Hello there Can you help me? I am in progress learning how to make turbo pump But I get stuck when try to make the bearing I cant found any of it Can you tell me step by step to found the ball bearing? Thank you

[@123kkambiz]

CAD CAM Tutorial who is the same gentleman has few video on drasing bearing.

[@rohantau7660]

thank your, sir :)

[@FlapjackGTHD]

Is there a list of materials?

[@sanket3189]

great work 👍

[@derek4613]

Good work

[@ESvideosmy]

I have a solidworks 2013, 2:04:12 Time is I dont have assymetric fillet Pls Help me :(

[@loncf5491]

Are you mechanic enginner?

[@alvinseptiano]

maybe he just hobbyist

[@dragan_trnavac]

Great video like always

[@nhatnamvo1716]

I can not access to your website. Would you mind help me please!? i'm vietnamese. Thank you so much!

[@ednomartins4065]

It's very good.. congratulations.

[@vaibhavgurav9591]

Really awesome!! Can you please send any 2D sheet or anything else for reference?

[@emmanuelsoto9551]

Hi, I'm working on my thesis for the degree in Aeronautical Engineering. In my thesis I am working on this type of engine specifically, and simulating the engine makes my experimentation much easier because I do not have access to a physical engine, your video was very helpful, thank you very much. Could you share with me the engine plans where you got the measurements from because I don't have access to them and I haven't found them on the internet? Please

[@oguzunlu6461]

how can i get a realistic vision like that 57:06

[@GhTamas]

Good job!

[@ayder_r]

There's a mistake here 3:49:00 The center electrode and the terminal nut are colliding!

[@monsterjesse]

sweet