V8 DRIFT TRUCK Returns to the Dyno! How Much Will it Make?

[@harrisonremedios8430]

The bus still holds the shop record for hp and torque at 305hp 440torque

[@TJrcTX]

6.0 life. I saw him heading toward Milwaukee a week ago and it puffed some (unusual) smoke. Tune maybe?

[@1993Revhead]

Tim Steinke nothing unusual about a Smokey diesel

[@goodkill1]

@@TJrcTX 6.0 tend to have issues with the vains on the vgt if they aren't kept up with.

[@rustumnoor6758]

@@TJrcTX lol you're shit follower, that motor ain't 6.0 it's a 4.0 1uz vvti

[@FirstLast-xf6xx]

@@rustumnoor6758 the bus dumbass

[@TheDumbGrunt]

Remember, it’s 250WHP, add 25% for drivetrain loss and you’re at 300-310HP which I think is plenty for a 2600lb drift missile. You’re making as much as an older 350z and they weigh a lot more than 2600lbs.

[@redaggron1]

25% drivetrain loss is a LOT, but given its way custom and totally mismatched parts, I guess that makes sense.

[@TheDumbGrunt]

redaggron1 the power steering alone sucked 10WHP, what do you think that power would have been worth at the crank?

[@imnota]

Plus I'm pretty sure he said this dyno reads really low in the previous dyno video.

[@calebpeterson8322]

I bet it's closer to 15%

[@tag206]

@@imnota Its a mustang dyno so.

[@evil03mustang08]

It’s not just the numbers. It’s about the complete package. Get your wheel hop sorted out and figure out how to get it riding a hair smoother and you’ll love it that much more. If it makes you smile, we smile with you.

[@carsnbikes914]

That seemed overly serious

[@robsorgdrager8477]

Jeff I agree.

[@pulser8973]

Next mod... Light weight flywheel to fix that rev hang and slow RPM gain!

[@youtuber-h3g]

you know thats because of the dyno, right?

[@imnota]

That's the dyno causing that, and the flywheel is already aluminum as it's a custom one to fit the 1uz with an sr20 clutch.

[@fastchevyz2876]

Pulse R next mod Ls swap that pos 1u

[@unklebill]

@fastchevy z28 as a man who's swapping an lq4 into an early 90's truck, i must say that's an incredibly boring option when you already stuffed a Lexus engine into your Japanese Ford Ranger

[@rex_s80]

I spots another Volvo. Greetings lol 😂

[@gingervikingjesus2351]

That lil monster STILL just sounds SOOO vicious!! I LOVE it!!🤙

[@jeefcake9269]

I swear this is the best sounding vehicle that you have.

[@richanglin]

facts

[@YoBoyNero]

Ging you should look into getting some bigger cams and a terminator cobra supercharger(M112) with minor adjustments will literally bolt right up to the 1UZ

[@adamcroteau8711]

He's thinking of doing a procharger on the motor while remaining stock from the valve covers down. I would do your idea tho

[@calebpeterson8322]

You need an adapted intake manifold, then they bolt on. But I'm not sure if they make them for the vvti heads or not.

[@kristianmichels5649]

There are none for the vvti motor that i have seen

[@jkiu2692]

People saying “that’s a small amount of Hp for a v8” need to realize stock ls1s (YOU KNOW THE CORVETTE MOTOR) made about 280-90 to the wheels this really isn’t that slow for a very low displacement v8 people need to stop thinking that “oh it’s a v8 it must make 500hp or it’s slow”

[@FakeSmiles-dk4ep]

Edenfigle Moodleberg true

[@adept7709]

He's also on a mustang Dyno which reads a lot lower than a normal dyno

[@jkiu2692]

Tra1aW_PC yeah but he also does have headers which boost a car up about 15-20 wheel but yeah I totally agree that it’s impressive especially for a Toyota made v8

[@jkiu2692]

Adept yeah I got my car dynoed on a mustang dyno and was sad it was at 394 wheel I was expecting like 425 😞 but I’m still happy with it

[@groundshakersociety6637]

@@jkiu2692 I should be the one crying as my truck makes 90+ to the wheels

[@bodes_26]

The fact you only needed 245 hp to drift as well as you did is amazing. Every other drifting youtuber needs like 350-500 hp for them to comfortably drift.

[@dennis9810]

Adam LZ loves to drift he's 350z... He also has a 1000 hp 2JZ S15 FD driftcar

[@jameeboo]

Chris fix last i remember has 195

[@ButteredUpToast]

I love Subies i think in his exhaust video he made a little over 200

[@jameeboo]

@@ButteredUpToast oops im wrong he reached 199 hp

[@dennis9810]

What I say doesn't really mean shit, I haven't drifted anything over 200hp😔😂

[@peterolson823]

Your videography at the beginning is getting much better. Very professional.

[@carlosevfaj]

bro, remenber, it's a 250 NA and stock, with just a bit of boost it's 400, 500 easy

[@Ineptus_Mechanicus]

Yeah, but he can't boost it because he's using the second-gen 1UZ with aluminum rods and pistons.

[@calebpeterson8322]

Yeah if he wants boost the rods and Pistons in there are no good. Should have gone with a non vvti 1uz lol. Much much stronger stock

[@carlosevfaj]

Good to know that

[@cyriously_nick2191]

Caleb Peterson I told gingium this, he said “there is a stock 1iz making 900whp with a turbo” or some ignorant ass shit like that. I hope gingium blows up the engine to realize he doesn’t know everything.

[@L1mbo]

@@cyriously_nick2191 you are a salty man.

[@adamcroteau8711]

I just played at a rock concert (I'm a drummer) and I saw the notification halfway through and was like "Damn it now I gotta wait for my daily dose of gingium

[@TheFXCELESSOne]

R/nobodyasked

[@adamcroteau8711]

😐 true

[@TheFXCELESSOne]

@@adamcroteau8711 I still love you

[@Brock_Landers]

Brother, I am definitely subscribed for this build. I can with confidence say that I have never seen a 1UZ swapped small truck. It is already cool af, but it would be so much cooler with a big ole trubo on it, but I'm sure you already know this.

[@gwilled_cheese_882]

Hey, it’s 250 bad ass and reliable horsepower

[@brokebutfunctioninggarage]

you need to do a hollowed out or "false" head light for the intake that way the front still looks complete.

[@keon5779]

I think a half-headlight-half-intake light would be better and wont cause someone to mistake him for a motorcycle at night.

[@vikramkarkada306]

Man youtube notifications sucks..Sent me to this awesomevid too late..Keep it up dawg!..You really deserve a lot more subs!!

[@DIANHAR]

Same

[@jhawk1977]

My 10 year old BMW X6 has 400hp with 450lb ft of torque...but I'm not killin it (making $$) on YT tinkering around with it every week. And as long as you keep making that, "I'm taking a HUGE DUMP" face when you accelerate through the gears, I'll keep watching and smiling.

[@thomashayhurst1318]

11:10 Hell yeah brother. Your on the Caleb McFarland KZbin channel

[@Mr.Saephan503]

Thomas Hayhurst - NO PEA BRAIN JUST NO

[@thomashayhurst1318]

@@Mr.Saephan503 I agree. Terrible crossover

[@seirodor]

Gingium looking at McFarlands "MINT" Trackhawk auction deal =D

[@randomprojectsusa5196]

Wortex you stole your profile picture from a drifting game

[@seirodor]

@@randomprojectsusa5196 and what ? because i like it ?

[@tristinwhitworth9121]

@@randomprojectsusa5196 okay and

[@randomprojectsusa5196]

No reason Just saying

[@Inweezy]

You don’t need a lot of hp to drift , I like that you keep it simple and not going for high numbers like every other yt , can’t wait till you slap a supercharger on the truck in the future , it’ll be sick

[@JakobsCarsAndMore]

This thing is gonna be sick I cant wait for this thing to be fully ready to rip

[@ButteredUpToast]

dont think that the power you made is "pathetic compared to other youtubers" you made this truck happen. 250hp in a light ass little truck with no weight over the rear end sounds fast to me

[@Voxx0086]

This video just made my day

[@Texas_Road_Warrior]

Just dropping a little knowledge... you don’t actually feel torque, torque is the rotational (twisting) force and horsepower is the perceived work “perceived” (how fast and hard it’s twisting) being the key word... torque X rpm = horsepower, that 30ft-lbs you’re feeling is actually the 15hp ish gain in the low end you can see on the dyno graph at 8:43 keep up the projects! Love your videos!!!

[@brianpardee1281]

The boring reliabilty of the 1uz will make it a awesome drift engine

[@SpudEater]

Brian Pardee Until He throws boost at those stock aluminum rods and pistons.

[@harrisonwaterhouse4742]

I would put the rear axle in the correct spot before putting in the 4 link. It’s too far to the back and that may be cause it to axle tramp (wheel hop as you call it) all the time. I drift and rally a car with a live axle and they rarely hop.

[@mongoosebootrrider]

That thing sounds rad, really unique.

[@japlishdrifting]

nice to see someone else getting into the toyota engines :)

[@mooseymikey82]

Very cool build, small truck with a N/A V-8 and a manual transmission. What is the heart of the beast, what motor?

[@jaysworkshop7573]

It's a Lexus 1uz

[@georgiosglykis6120]

mooseymikey82 1UZ

[@lemuhnn]

1uz

[@dannygallagher9290]

Wow it sounds so nice!!

[@vaggelisgian]

Pre video prevision : 247 hp Edit 1: woah I was close Edit 2: Nice chopped stickers

[@cooperdanielson1265]

Βαγγέλης Γιαννόπουλος you changed that. It was at 265 at one point

[@vaggelisgian]

@@cooperdanielson1265 why would I lie about this? I mean if I just to wanted get attention, I would watch the video and then say that I think that it made 252 hp. Plus the next number I thought was 270, but I thought it was way higher than the actual number, because a lot of things would have to be changed. 247 was the original number I had in my mind ever since the notification for this video popped up and it is the only number I had on this comment.

[@FinishLineFactory]

Think about it like this, you make the same power as my Tahoe but it's half the weight. That's winning in my book!

[@Startchie311]

I peeped that you were watching Cleetus. I like it

[@WildWildWeasel]

Supercharge the damn thing

[@StanleyKubick1]

You got 200 whp per ton. That's very respectable for any car, especially one that you built yourself (mostly)

[@spiderjockey6593]

Tandems with Gingium, Adam LZ, Chrisfix and TJ Hunt would break the internet

[@gitaarmovies2003]

oohh yes

[@_dervalentin7720]

Cleetus

[@tubejorrit]

I love it how everyone forgets evan shanks 😂🤣

[@ryanhodgkin7475]

Gingi in the truck, Adam in the 240, tj in his 350, Chris in the mustang It would be lit if Taylor brought his 350 or miata, and Evan brought his z But for all of them to be close, gingi and Chris would need a form of forced induction, it'd be lit af tho id pay to see that

[@zackrogers9334]

Especially if they tandem through Hoonigan's Burnyard

[@kolindore5235]

Who else noticed his exhaust plate went missing

[@jaredrichards5008]

I noticed it right at the end 🤣

[@premeditadeds6304]

8:00 “get the car warm”

[@andrewgibson7346]

One of my good friends has a 1uzefte in is s13 and those engines are monsters when you turbo them. To my knowledge you can make 600 moderately safely with stock internals

[@Nebbia_affaraccimiei]

2:26 you know they make these magical things called wireless keyboards.....

[@RicardoPCGamer]

Yes haha

[@RicardoPCGamer]

Well I guess he wants it close for good visibility

[@ricejoker]

That run at 7 min was where I was like omg that engine note sounds so much nicer than before. It was nice before but just didn't sound quite right for some reason

[@nikolai3332]

Cam it. Cammed 1UZs are narley. If you can't afford a especially made cams, take the ones that you have already(stock ones) to a machine shop and let them increase the airflow

[@milobest1073]

HI THERE!! NEVER THIS EARLY LOVE YOUR CONTENT SO MUCH!! OG SUB RIGHT HERE

[@TT.357]

“It sounds like it makes a lot more than 250 horsepower” - Every classic muscle fan ever

[@sipballinjay6211]

Needs a turbo!!

[@christianpierre-louis198]

hatium

[@Christ_Enjoyer]

Would you ever put a cab visor on the truck?

[@cccraigslist]

Please don't

[@Vykk_Draygo]

That's about as good an idea as weather guards on a riced out Civic. Gross.

[@baddonkey6876]

250 is good for low displacement, don't try to turbo that, if you do you NEED to gap the rings or they'll expand from the extra heat and rip the top of your pistons off or shatter those stock rods, I've seen ppl put a turbo on stock rings and run fine for a bit then suddenly they lose power and have a ton of blowby or send a rod through the oil pan

[@jackgrenner2827]

Such a beautiful truck

[@axtran]

So I was flying over Chicago as I had a layover in ORD and instead of anything about Chicago, I'm like, "Gingium and the drift truck is somewhere down there..."

[@moneyslap415]

Much love for you caleb but dont rear mount turbo it😂👀

[@aaron8973]

Why tho?

[@mokujin6507]

Lag??

[@aaron8973]

@@mokujin6507 bro, where you place the turbo doesn't effect turbo lag that much

[@splixsky]

MONEY SLAP he said he’s gonna use a centrifugal supercharger but not any time soon. he once considered a rear mount turbo cause of the 50/50 weight balance, but that wasn’t a Smartium thing to do

[@YoBoyNero]

BigBalloon19087 because it’s a dumb idea all around

[@JulianValentini]

Good numbers, not a dyno queen. Great.

[@yagziscelebi5910]

Turbo it man. Just do it.

[@tunenvroom9527]

That MCM sticker tho.✌

[@xxkillervibezxx1919]

Who’s red Miata is that in the background? It’s looks good👀

[@wottle-b335]

Just supercharge it already. You know you want to.

[@lamarrr4874]

11:05 Anyone else notice cleetus' trackhawk vid?

[@Barizolla]

10:31 I was like wtf this shit has no power but realized the speedometer dont work

[@brettdowgielewicz9503]

My truck which is a f250 5.4 sohc v8 2v per cylinder from 2002, it said online it was making 260hp 330tq and it’s a 3/4 ton crew cab 4x4 maybe it’s crank idk

[@mike.135i]

i hope you wrap it with a sick livery and make the inner bed black or bedlined would look hectic

[@1BadRAMLimited]

Great stuff so far ging! But when r we going to see some more esthetic mods?

[@eastonweeden9263]

Only the og's remember when the miata didn't have a turbo and gingium made gaming videos

[@Ali-bz9gd]

A small 6262 turbo will spool very fast and get you to 450 whp easy, and you need new rear suspension

[@5iffty]

I’m telling you man Vstack is the way to go

[@ClashOfClansSekcArmy]

keep up with the good work

[@corey0189]

Put a little led light bar where the light you took off was

[@HooverTuber]

In a Mazda that is crazy power! Well darn. It’s not all about crazy horse power but about how you use it.

[@jaketheginger1333]

4:27 oh look a CRX

[@SpudEater]

I actually love the original paint of this truck, I’m so sick of seeing wraps and shit. I love a good nice patina, weathered look, especially on a truck. Also, my man you need to build this engine if you are really looking to boost it. You have aluminum rods and pistons, they won’t be nearly as reliable as if the engine were built up from the get-go and especially if this thing will be ripping sideways bouncing off of the limiter constantly at track days. Just looking out for ya, keep up the great content!

[@ez68eldo]

Great intro...

[@-Sirens-]

Aye 1 min club, whats up caleb?!

[@traxhax30]

did you just loose the exhaust plate ? xD

[@thomasrivard9772]

holy shit your subs are really growing

[@FadedGlory4532]

Should have done a Ford 4V would have made damn near 60 HP more

[@austinbost4653]

Isn't it bigger and heavier?

[@trenton1171]

That’s what tunes are for add power without mods

[@tylerdenman448]

OH shit here we go

[@outdoorslife268]

You should super charge it sometime in the future

[@dennis9810]

Switch to electric power steering pump

[@miguelmsilva4112]

that might be expensive, and it might not feel as good, but he could look into it.

[@bawjawmcgraw2232]

For 10 hp gain? Nah, fuck that just boost it😂

[@dennis9810]

True😂

[@dennis9810]

Why digg for 10 n/a hp, when u can boost it for pretty cheap, and get 400-600 boosted japanese horses🤩

[@jakeumebayashi3243]

@@dennis9810 he cant boost it, he has aluminum rods in the 1uz i believe, those cant withstand that much power

[@terrencescott2776]

Around how much did this build cost if u dont mind me asking. I have the same motor and would like to do something similar

[@bencovington6180]

Super charger!!!!!

[@lucasframel5817]

What wheels are those? And what size?

[@jaspervandewiele502]

A supercharged 1UZ would be cool

[@MadHaterGaming]

You should put some type of spare tire rack in the bed

[@joeg.1119]

Why did u took the headlight out gingium ?

[@tilmanblackwell1115]

in the truck

[@rufusllewelyn]

Love u ginger

[@juansebastian4802]

Turbo itttttt

[@draggonhedd]

It may not be the intake itself, yoru air filter may have been slid down on the pipe too far and restricting it.

[@p.shadrack4229]

Would you ever take Molly of the drift truck, once they are built and running properly, to the drag strip to see what they can do?

[@stevec7819]

needs some kelford cams

[@AtomicG]

Gingium I love you but when are you gonna put that headlight back in? I know your budget is tight and I'd had to see some of it go away because of a moving violation.

[@TimMatijow]

I wanna see a race between the Drift Truck and Molly

[@sethmiddleton5435]

maybe check the timing on the engine. I feel like boosted boiz always has that gun out checking. didn't see it once when you were goin. still great video :)

[@charlesseara8502]

Wiff a working manifode

[@59Mrgamer]

Where is your left headlight ?

[@sly2196]

Whats the point revving past 5500 when your are hitting max torque at 4250? other then sooner or later you be at the rev range for max BHP

[@brysonshires9742]

So you want to rev to 4200 then shift to the next gear, or do you want to go 6kplus and the next gear already be in the power band

[@xsickgod5407]

Cool

[@joshuagoertz61]

Did the backlash in the rear end get fixed? That's going to be a decent amount of parasitic loss there.

[@adamcroteau8711]

Yup he fixed it

[@toothless_2v594]

Peep cleets McFarlands video at 11:00

[@Zapekk_JH]

Boost that puny thing already.