Oreck XL21 Reassembly And Brief Run

Рет қаралды 5,810

Күн бұрын

Пікірлер: 39

@pcdubya 2 жыл бұрын

Interesting, I just disassembled mine to wash the bag since the vacuum works perfect, but smells due to 15 or so years of filtering air. I couldn't get the nut off the fan attached to the motor, not much room and didn't want to break it. Bearings are fine so just cleaned it all real good. These Orecks are like old Snapper mowers or coleman stoves, quality made!

@Jack-Surreal_Panes Жыл бұрын

My newer 21 has a cracked housing, trying to get fan off but nut is seated flush so will play with it but idea is to use this motor in another model, one with a smaller fan housing if that fin fits the shaft. Hopefully I get the wiring correct. LOL

@VacLab Жыл бұрын

Best of luck!

@Been823 3 жыл бұрын

Thank you! 😍 You helped me a lot! I was able to clean mine! ☺️ I'm not afraid to unscrew it anymore!

@VacLab 3 жыл бұрын

Fabulous!

@KirbyEnthusiast 4 жыл бұрын

Great video , really appreciate every video you put up . I’m learning so much .

@vacuumtests9225 5 жыл бұрын

Oreck vacuums belong to the category what I definitely like. Simple lightweight direct air upright. Even the smaller Oreck is excellent, but this is definitely more desirable. Only downside is that especially the smaller model is super noisy. But otherwise fantastic design. I can't wait to see more videos of this 👌

@rnbsteenstar 5 жыл бұрын

I just wish they didn't lie about the weight (claiming 8 pounds, when it's more).

@JustMe-eu7uj Жыл бұрын

Could you show where the wires attach too a friend took mine off to fix and didn't mark them so i need to do it myself

@kg5vacuums205 5 жыл бұрын

I’m interested now of what this one will get on the airflow box since it dose have that different motor sounding to it

@VacLab 5 жыл бұрын

Airflow and suction video has just been posted. Enjoy!

@kg5vacuums205 5 жыл бұрын

VacLab I’ll check it out

@jeremyfertig4187 2 жыл бұрын

Sir I really do appreciate your videos. The camera work is good, the content is great...but with respect the audio between comments it is distracting at best. Not your problem at all of course...but figured I'd mention it. Please feel free to ignore :)

@VacLab 2 жыл бұрын

Do you realize that this video you are complaining about is more than 3 years old? 🤣

@jeremyfertig4187 2 жыл бұрын

@@VacLab Not so much a complaint as a observation but thanks for the video in any case. Take care :)

@rockvillemike6062 2 жыл бұрын

Years ago, I worked in a piano refurbishing shop and learned a good trick to use with screws. Put the screw in the hole and turn it backwards with a little pressure pushing it it. 9 times out of 10 you will feel and hear a little click as the screw finds the threads already cut in the hole. Then when you tighten it it uses the threads already cut in the material. This puts less wear on the screw hole and keeps them from getting roached. Just sayin' Mike

@georgemartinez1720 3 жыл бұрын

What grease do use on the Bearings that wont attract to much Dirt

@VacLab 3 жыл бұрын

Mobil EMB. You'll see it a lot in my repair videos.

@monicamoreno6088 Жыл бұрын

I need help I took mine apart to clean it and now it doesn't work

@VacLab Жыл бұрын

Soooooo, what kind of help do you think you can receive based on no appreciable info other than it doesn't work? 😁

@robotron17 3 жыл бұрын

"The ball bearing cage (also known as a ball bearing retainer or ball separator - these are used interchangeably), is the component in a ball bearing that separates the balls, maintains the balls symmetrical radial spacing, and in most cases, holds the bearings together."