Vaillant ecotec plus pin holed heat exchanger

All videos are for the intended use by gas safe registered engineers only, such procedures should not be copied or performed by non competent and unqualified persons.
3T Gas Ltd - Heating and Boiler repair specialists in West Midlands
www.3tgas.co.uk
0800 9997870
Instagram the_mental_gas_man
MENTalk mental health advocate
www.MENTalk.online
Baxi ,Worcester Bosch , Viessmann, vaillant, ATAG, main , megaflo, ferroli, Ravenheat, navien , grundfos, wilo, Heatgeek, Intergas , talon , heatrae sadia , adey, boiler repairs , boiler servicing, central heating , boiler installation, new boilers , power flushing , vdi2035, magna clean , adey chemicals , faulty pumps , faulty pcb’s , diverter valves , balancing , efficiently , gas engineers

[@jamesknowles550]

Hi -- love the video -- i'm a sole trader gas service engineer just like you + iv'e been to many boilers just like the vaillant eco tec plus -- when the customer has had a service contract with ether british gas or homeserve or similar outfits -- they are there for about 15- 20 minutes + take longer filling in the paperwork they leave than doing anything to the boiler !! -- i went to a vaillant eco tec pro 24 which was in the roofspace , i was up there for over an hour cleaning the heat exchanger + propely servicing the boiler + i heard the guy downstairs say to his wife -- the engineer who's come before is only up there for 20 mins servicing the boiler , this guys been up there for over an hour i hope he knows what he's doiing !!! -- you can't wni eh !! -- take care Jim

[@YoutubeHero666]

haha i had the same thing the other week servicing a fire. I could hear the old lady keep saying to her daughter am not sure he knows what his doing. the last guy did not need to go in the loft or when it was installed. Ended up having to cap the fire off! the chimney was terrible and catchment space was totally wrong with holes everywhere! bet she wished she had the last guy back now!

[@opidopie]

Story of my life, just show them what u are doing and keep up the good work!

[@buxvan]

I’m like you. I love repairing boilers that other engineers (if you can call them that) either haven’t got a clue about repairing or just want a boiler swap job. I can sleep at night. Great video. I worked for BG for 18 years but left when they appreciated the people who couldn’t fix boilers but could sell new ones more than the ones who actually Fixed them.

[@ArifPolicewala]

By far my favourite vid❤. Watched it a few times and it is just as interesting to watch each time.

[@cfgman9176]

Love your attitude mate straight to the point just like me. Down South we have our fair share of comedians posing as boiler repairers. Keep up the good work both boiler wise and videos...

[@LondonGas]

Nice to see someone else knows it's not about making the heat exchanger look shiny with metal or nylon brushes, it's about clearing the gaps to allow condensate to drain. One of my fave and most used tools is the Vitodens cleaning kit. I take great pride in getting customers to cancel their British Gash contracts, not fit for purpose, your video proves it.

[@andreilapo1973]

Good work, don’t you think you could have damaged heat exchanger when cleaning:)) deserve a cup cake after customer constantly supervising your knowledge. Mate I am new to industry and grateful for your uploading and guidance.There are no practical on servicing unfortunately. I think it should have been part of portfolio. Never in a million years. Teachers also not very good. Lots of crap from them working days and very little on what’s needed. Thank you and please keep this videos coming. You helping many new engineers (or as I say 15% theory only engineers)

[@Martindyna]

Top marks for trying to save the customer money, i was amazed when you gave using a leak sealer a go, would be great to know how long it lasts.

[@waynehardiman9421]

Class again for someone like me being only a year being self employed love seeing someone care and show you might thinking your saving money and getting agood service from big companies and your not the satisfaction you must get from seeing and showing them what you do look forward to the next one

[@Bobbymac2000]

Great video as always pal. As someone commented below BG don’t get long to carry out a ‘service’. I wish they wouldn’t use the term service as they only do a basic safety check.

[@daveyr5462]

Yeah Shittish Gas aren't great, it's just a poke and go. Rip off merchants still living on their old reputation that the older population still associate with the original BG.

[@samueleugenepeoples3144]

another boiler given another lease of life, well done. I Love your work ethic, keep up the good work

[@CommercialGasEngineerVideos]

Well said

[@Limitlessboilers]

Well done for exposing the scumbags pushing down the boiler servicing prices. They are now charging £49, might aswell save the money towards a new boiler that pay for BG service

[@timothylindops4577]

Excellent videos, best on KZbin 👌🏻

[@vlodski73]

Really good video! Thank you!

[@luisangelrevillavallecillo7166]

Muchas gracias por el vídeo me a sido de gran utilidad. Un saludo desde 🇪🇦

[@opidopie]

Well done sir. May I ask how much of miracle seal did u use? And was the system full of water? No prusure, no pump?

[@russellwilliams5336]

Impressed, just impressed. BG - someone should be gripping the rail...

[@philipread7741]

I commend your efforts and making the decision to investigate the inside of the heat exchanger and showing the shortcomings of many operators in this industry, not just the big operators.. However, once the heat ex leak was found. I would have stopped and told the customer that the heat ex has a leak and is un-serviceable. A leak like that will not stay leak free for long . The heat and temperature profile in the heat exchanger is too high for a sealant to work in the longer term., let alone what is does to the plate heat exchanger and divertor valve. The least cost option for the customer would be a fixed price repair from Vaillant. It is cheaper than you or I can purchase the main heat exchanger. Also they would have replaced the graphite seal, electrodes and maybe the burner too. You charge for the service and hopefully the customer would acknowledge your honesty and have you back in the future for servicing and other work.

[@stewartharrod1706]

Really satisfying watching that big repair custo er must habe been Impressed with that 👌

[@aminsajawal3935]

Well done Steave great job as always👍🏻

[@paulsmith2931]

Fair play to you, used miracle seal on system leaks but not on a hex leak, don’t know wether I would trust it long term, or risk a call back on it, do you give any guarantee.

[@2048robert]

Great videos mate I do instals and breakdowns and iv picked so many tips up from your vids thankyou 👍

[@martinwright7093]

In fact a few years ago BG were reprimanded by the Avertising Standard Authority for claiming they carried out boiler servicing on their Channel 4 advertising. They had to change the wording to ‘boiler safety checks’.

[@sarucasual9141]

Top job

[@jockster5525]

Good morning..great to see you back man ☺️👌👍👌💪

[@thementalgasman3tgasmainte317]

Been so busy just haven’t had time to edit stuff

[@jockster5525]

@@thementalgasman3tgasmainte317 completely understand. Same here really .. perfection is one thing .. miracle's another 😄☺️👌😁

[@FLYNN..]

Great work, hope it holds for em.

[@Zaine22]

About time I've been waiting for you to upload.🙌

[@johnmelling9950]

Its great to see somebody that knows what they are doing and takes pride in doing the job properly. When you poked the dirt out of the heat excanger with that putty knife, where did all the carbon go?

[@thementalgasman3tgasmainte317]

Thank you kind sir , the carbon and debri gets washed down into the condense trap which is then removed and cleaned out

[@Doom-ku8qo]

It’s not the engineers fault they don’t service correctly when companies and social housing are only paying £23 per visit and giving you at least 10 a day plus breakdowns . It’s the companies that need taking to task but that won’t happen

[@blooflame1846]

As ever a great video. Really enjoy seeing a local Man doing the right thing. Have to say I haven't used CT1 sealant and am impressed. He has to have a new boiler now surely?

[@nuntiusuk3345]

I can’t see sealer lasting long in that environment . New HX I think .

[@ahmaddarwiche7453]

Well done good job

[@melvinevans9981]

Damn !!! What . Never seen an heat x in such a crazy condition normally just roof moss inside but that is bad

[@jameshawkins5280]

Great video you went the extra mile to save that boiler no thanks to BG

[@jasonwhittle5008]

Well done mate 👍

[@jameswilson2899]

I've just watched this, how much all that cost in the end, great job

[@grahamhaynes7658]

I've an eco tec 28 installed in 2015,been losing pressure constantly,checked all pipework in house,no leaks.Been advised probable heat exchanger leak - new boiler??,only water loss is out of condensate pipe.

[@aleksandarmilosevic9654]

Wonder what's gonna happen with radiator air bleeding valves? Probably miracle seal will block them

[@craigwebster7405]

To me it seems like there is 2 reasons this happened to this boiler. 1, BG being shit 2, the one time use seal at £20 a pop, surly it makes engineers reluctant to remove the burner unless really needed. It's an extra charge on top you'll need to justify

[@MrKonquer]

You don’t need to justify it at all, it’s part of the requirement of the service to have your heat exchanger cleaned annually by boiler manufacturers to cover your warranty, it’s so stuff like this doesn’t happen, bg and homeswerve are basically scoffing all the work up and not doing it properly that’s why they stopped calling it a service and call it a boiler check, they charge like 60quid and that’s the average price for most boiler service kits, huge red flag.

[@geoblueGR]

i am a maintainer too......the key part is "between the coils".... seen many videos but nobody cleans "between".....

[@RoobieRoo2]

Its true, British Gas, SSE services are not worth anything, flue analysis, clean the condi, maybe clean the filter and run away.

[@MrLibbyloulou]

I am a vehicle mechanic...i think your a rum bugger using that sealer on A hx at those temperatures....only ever used a sealer on the odd radiator...(car).....did you ever get a call back on that repair....? still, nothing ventured.....10/10 for the video...

[@thementalgasman3tgasmainte317]

NO call back so far , you don’t know until you try it 🤷🏽‍♂️

[@joncoke8208]

Hes bk!!! Unfortunately bg etc engineers dont get the time allowed to do there job properly, a friend works for them they get 20 mins for a service plus all safety check isolation etc

[@CommercialGasEngineerVideos]

Very true

[@matthewtrueblood408]

It’s time there was a change in the industry where these 20 minute “services” were a thing of the past. We used to take burners outbursts who so why not anymore. Oh yeah, profit!!!!!!! That’s all BG are about, hence why they’re all over the news and using sub-sub-contractors or 3 month fast-trackers as all their long serving loyal engineers were forced out.

[@codysieverts647]

What is the tool you used to clean between the coils?

[@CommercialGasEngineerVideos]

Back with a 32 minute whopper.

[@anthonygreenwood4486]

Wish you’d of teleganned it first, Shittish gas 🔥🔥🔥🔥🔥🔥

[@markcain4710]

Nice work ,we’re did you get that cleaning tool

[@SalimKhan-gk1fh]

That is a viessmann heat exchanger cleaning tool

[@mehmetaliciftci3495]

Merhaba Türkçe alt Yazı modunu akti hale getirirmisiniz

[@ryangroves5554]

Nice work!, what camera do you use?

[@JayGasEssex]

Same old story, always blame the "big utility companies"... I work for one of these companies, I always replace the G10, always adjust H/L if out, clean and flush heat exchanger etc.. shouldn't slag off engineers, not all the same mate!

[@FLYNN..]

Hahahahahaha, fuckin BG 🤣

[@SteveN-pw4dj]

And all these muppets Gas Safe registered.... mmmm

[@Westy90_]

They haven't done anything dangerous, the readings on the probe n go were probably within limits (I hope). People have cars that never have a service, it just shortens the life span. Its the same for social housing, getting too many to do within a day

[@ryantidball1118]

Don't tell me every service engineer takes the burner out and cleans it. You're slating BG you get these Engineers where ever you work, and I bet you wouldn't service it like that if the camera was off

[@thementalgasman3tgasmainte317]

Agreed you will get these engineers everywhere, but it takes a few seconds to ask if the boiler has ever been stripped and seals replaced , this boiler hadn’t been stripped for a long , I’d bet you a years salary that I strip every boiler I service unless it’s seals are 1 time use only and it was stripped by me the year before unless customer is happy to pay for seals again , pretty much any boiler on the market is less than 1hr for a full strip down

[@SteveN-pw4dj]

British Gas and Homeserve useless... Get a proper service and it will hardly ever break down and change a few basics like electrodes every 5 years maybe. Worked for me and cheaper than paying BG and homeserve to do nothing.