Valeton GP-200X 10th Anniversary | ALL 128 + THE NEW Artist Presets! | Pair of Pandas DEMO & REVIEW

[@lourencomalcatanho754]

Hello! Thank you for your demo and your constant work! Does this unit can do snapshots like the Helix/Hx stomp?

[@PairofPandas]

Thank you deeply! And please subscribe for more panda action to come! ✧◝ʕ⁀▽⁀ʔʕ⁀▽⁀ʔ◜✧ In essence, yes: you have both the 4 slots in every bank which change seamlessly (as you can hear in the video), as well as footswitches, which can be assigned to the various blocks in your signal chain. Switch in and out to your heart's content like on a real pedalboard, and with no lag. Let us know if you have more questions, we shall be here to assist!

[@lourencomalcatanho754]

@@PairofPandas Thank you so much for the reply! Subscribed

[@PairofPandas]

@@lourencomalcatanho754 Thank you so much for subscribing!! ♬ฅʕ˵◠ᴥ◠˵ʔʕ˵◠ᴥ◠˵ʔฅ♬ Yes, you can definitely use the footswitches to turn one or several blocks (pedals, amp, etc.) ON and OFF. But if you want the footswitches to change the settings in your blocks (pedals, amp, etc.), you will need to save the separate settings (think of them as snapshots) onto different slots of your designated bank. For example 64 A, B, C, or D. And switch between them freely, while ALSO being able to just switch pedals ON or OFF, with the other footswitches. You have 8 footswitches here, all the functions you can need are factory ready! Let us know if you have questions, we are here to help! ฅʕ≧ᴥ≦ʔʕ≧ᴥ≦ʔฅ

[@HMohr]

Is there any difference between this and the regular gp 200 besides the color?

[@PairofPandas]

Yes there is! Please watch the main demo for full detail: kzbin.info/www/bejne/qZjOo2OhoMp9pbc There are several small differences actually, besides the new colorway: 1. improved footswitches. The originals are great too, but these are said to be more precise. 2. improved ON/OFF switch. Slightly different action from original, plus once you turn it OFF, there is no more residual noise going to your interface. Dead quiet as needed, zero wait! Firmware stuff should be for everyone, not sure about the presets though. The artist presets, with Pair of Pandas presets too, might be just in this one. We'll have to check and see. Let us know if you have more questions, and thank you so much for watching! ʕʕʕʕʕʕ•ᴥ•ʔ•ᴥ•ʔ

[@davidengracia4992]

Hi, great demo. I'm just wondering if it's possible to stack two modulation like a phaser and a tremolo at the same time in the new model? Thanks a lot

[@PairofPandas]

Thank you deeply for being here with us! ❀ʕ ｡•㉨•ʔ人ʕ•㉨•｡ ʔ❀ There are some modulation algorithms that you can stack: for example 2 auto-swells (Boss SG-2) or 2 hammy's (Digitech Whammy). Or an autowah and a phaser. But other combinations such as a phaser and a tremolo are not currently available. Let us know if you have any questions, we shall help!

[@davidengracia4992]

@@PairofPandas Thanks a lot, that's a really helpful information.

[@PairofPandas]

@@davidengracia4992 Thank you too! ʕ˵◕ᴥ◕˵ʔʕ˵◕ᴥ◕˵ʔ We are deeply grateful to have you here, and we shall help whenever you need us!

[@JuanFerRamirez]

My presets ❤ 27A and 27B 🔥

[@PairofPandas]

Hello, Juan! And thank you for being here with us too! ❀ʕ ｡•㉨•ʔ人ʕ•㉨•｡ ʔ❀

[@junwelvillaruel2531]

Hello sir im asking about GP 200 if the IR's are good?from philippines🇵🇭🇵🇭🇵🇭

[@PairofPandas]

Greetings to glorious Philippines! Be sure to subscribe to our fluffy panda channel! Oh yes, the GP-200 IRs are some of the best out there! They really took the time and have amazing IR cabs at the ready, both from custom made cabinets and vintage cabinets alike! Please have a listen here, played with a JCM900 model: kzbin.info/www/bejne/kHWQh4CQbsSpjtU And let us know if you have more questions, we shall be here to assist! ฅʕ≧ᴥ≦ʔʕ≧ᴥ≦ʔฅ

[@Lars.H.Pedersen]

Why all the changes on the volume knop. Does the presets not have the same output. If not why not make them so that they do.

[@PairofPandas]

That is easy, haha! There are literally ZERO modelers on Earth (including Fender TMP, Neural Cortex, Boss, etc.) that have identical volume between presets. None. Why this is the case is more complex. The difference between presets can very depending on pickups. Nevertheless, all guitars and all input signal levels seem to have a huge discrepancy between presets in absolutely all modelers. So it is what it is. Let us know if you have more questions! And for more epic modeler action, please SUBSCRIBE! ❀ʕ ｡•㉨•ʔ人ʕ•㉨•｡ ʔ❀

[@Lars.H.Pedersen]

@PairofPandas Well, that dosen't make sense to me. I have a Line 6 Pod HD500X. And all the presets i made my self have the same output even if theres different amp models used. When i save a preset i make sure that the output volume matches all my other presets. I trust thats the idea with presets. To be able to switch between sounds and amps without having to adjust the volume each time.

[@PairofPandas]

@@Lars.H.Pedersen Wait, you are missing the point: the presets that you made YOURSELF, of course those are of the same level! You can do this in literally ANY modeler out there. We were not talking about this. We were talking about FACTORY presets. There are ZERO modelers without volume differences between factory presets. Period. Our presets (there are two of them in the factory set Valeton GP-200X) actually are all the same level when played with a Les Paul. Obviously, dynamics can vary the volume further a bit, but yes, the presets we made OURSELVES have matched output volume. Let us know if you have other questions, we will do our best to help! ʢᵕᴗᵕʡʢᵕᴗᵕʡ

[@Lars.H.Pedersen]

@PairofPandas I know, but I guess that it is possible to edit factory presets to, or at least copy them to empty slots and then edit an level the volume. The other thing gives absolut no mening to mee.

[@PairofPandas]

@@Lars.H.Pedersen Yes, you can, but it doesn't come from the factory like that. You could even sit down and physically redo ALL the presets, delete everything, make new everything and have 264 or so custom made presets just the way you want them. Valeton allows that. But this video is about FACTORY presets. Not modifications. If you want another video about making your own signal chain for the Valeton GP-200X, please subscribe: we may have just what you need coming here soon!

[@jordon.melodiz426]

How to get the new presets without restarting the unit? I have the LT

[@PairofPandas]

Thank you for watching, and please subscribe for more awesome panda action! Q: How to get the new presets without restarting the unit? I have the LT A: Please update to firmware package 1.6.3. It won't reset the unit: your parches will likely stay, unless they occupy slots between 26A and 32D. If your presets are saved anywhere between 26A and 32D, save them in another slot too. For example in 64 A B C or D. Go to the official website, download the latest GP-200 LT software AND firmware 1.6.3, and follow the instructions. Let us know if you have questions, we will do our best to help! ฅʕ≧ᴥ≦ʔʕ≧ᴥ≦ʔฅ

[@ruanmoro]

@@PairofPandas I've already done this, on the GP200 (not the LT, it's the normal one) and 26A to 32D continue to be my usual presets

[@PairofPandas]

@@ruanmoro Interesting. This could mean the new patches are NOT part of the new firmware. In this case, the only way to get the new patches would be to buy the limited edition GP-200X. They may be hard-coded to it, outside of firmware changes. If you want, we can check with our other GP-200 devices, do the update on them and see if the patches change. Let us know if that would help! dʕ｡◠㉨◠｡ʔʕ｡◠㉨◠｡ʔb