M72 LAW+ asking for help

[@mattis537]

Just a tip for carying/using m72. Have the strap over the left shoulder with the back end pointing down. Then you can pull the tube to your side while still having your rifle slung and pull the safety pin. Then you are free to fire without having to unsling your rifle or the tube. Also when shooting over 100m. Try to get proper support for non-shooting hand. Its big variation in trigger weight betwen different batches and therefore easy to miss if you dont have proper support.

[@valgear5525]

thank you man!

[@Apus__]

Good points! With the older variants that have trigger on top it is always recommended to support the launcher on surface if possible. You just need to have enough clearance around the business end of the launcher. Also when arming the launcher I would hold it higher and do short pull first and then sharp pull until tube snaps into the position. This ensures the proper arming and if defective launcher were to go off during this phase it would not harm the shooter.

[@DanasSutra-t8v]

@@valgear5525 for a fighter, wartime is not the worst thing. peacetime and sold land by politicians and war profiteers is

[@Minor1623]

​@@valgear5525 maybe y'all wouldn't have to ask people for money so that you could get crap you think you need if your government in 2014 wouldn't have started beating and killing the people in the East who tried to vote in a referendum to break away from that crap country y'all sure don't like russian-speaking ukrainians in the east maybe your government instead of letting the American government overthrow them in 2014 institute their puppet government should have taken the funds from all of the natural resources they were pulling out of the East and maybe distributed some of that back and they would have never tried to breakaway and form their own country which they've done quite well the free DPR and the free LPR fought strong and brave for a little over nine years before Russia finally decided to join in and help their brothers in arms and before you try to tell me I'm wrong not only do I have family in both Russia and the eastern part of what once was Ukraine I speak with them as often as often as possible and I watched this unfold live in the streets with your government beating elderly people to death at the voting polls and stealing the voting boxes 🖕🇺🇦 🤙💪🇺🇸💪🇷🇺🤙 Also you can lie to your viewers as much as you want because all they do is regurgitate the BS they're being told by you and their own government Americans are too ignorant to do their own research they just believe the BS they're being spoonfed to turn around and regurgitate it like they've done their own research

[@johan8969]

@@DanasSutra-t8v Spoken like a true keyboard warrior

[@n.granger1343]

Absolute gem of a channel! Training grade videos, candid feedback from an active soldier & a few laughs to boot! What more could one want - much thanks from Australia

[@phyre691]

Kraken merch goes hard

[@Bazzooka1518]

Doing its job blasting the enemy. Bless you

[@thomastabor2704]

Never had to endure the rigors of battle but much respect for you Sir. God willing you make it to a time of peace and get to enjoy telling your grandchildren of your adventures.

[@ra-ge]

I got big respect for you guys fighting in this crazy modern warfare, when pretty much nowhere is safe.I hope peace comes soon.

[@glennhynes5263]

Man I hope that you can find a bunch of those connectors. You are going to get alot of guys scouring the world for it. Good Luck. As an ex-army tanker from the 80s, I remember the Law being seen as a puny/ underpowered antitank weapon. But it seemed excellent for everything lighter than a tank. God Bless brother, hang in there.

[@sionsoschwalts2762]

Need to capture a helicopter to get the connector!

[@uncompliant]

One of the most underrated channels ❤

[@Covert_Arrangements]

I am in the process of purchasing the part needed for the NVGs for you. I found a source.

[@apathtrampledbydeer8446]

Nice shot. Only shot AT-4 the 20mm and 9mm trainer versions, oddly I was always spot on while the target was moving but quite crap when the target stood still.

[@Milo_1368]

The M72 is my favorite shoulder launcher 2nd only to the Carl Gustaf in my experience. Lot of bang in a small package.

[@cl4998]

If you don't care about the historical/resale value you can just cut, and splice the cable together. You can buy another set of male and female connectors and solder them onto the stripped wires, finish with heat shrink.

[@giloro85]

Its not a 1954 Fender Stratocaster 😂

[@MichaelThe-Pyro]

@@giloro85 a connector is a connector...

[@theodorekorehonen]

Also it looks very much like a DIN 5 connector though without knowing dimensions it's hard to say

[@jacobfarnsley8017]

I live by an NG armory in the United States and by buddies dad worked there. I went over to his house one day and saw an M72 tube and was immediately in awe🤣 to make a long story short he had access to expended launchers and I managed to snag one from him. I’m not exactly sure what happened to it I think my mom tossed it when we moved but for many years that tube featured in our many airsoft battles🤣

[@someguy872]

Interesting that you showcased the LAW, stay safe!

[@LtActionCam]

Another cool thing about the M72A7 variants and up have a picatinny rail on the top in which you may zero with a visible or IR laser system for night firing.

[@ganzhorton]

Good luck out there Val, stay safe and victory soon.

[@eloisalembier4121]

That genuine laugh when tout managed to hit first try haha. Glad you are safe ans doing good, God bless you

[@Timmysteve]

I enjoy hearing about your preferences for particular weapons. Thank you for sharing your interesting perspective.

[@czar6595]

Nice. A quest. Come brothers, let us find the holy РВН2-5-1Г7В.

[@johnlevitater1775]

I'm On It! Lets find that thing!

[@wendigo-actual1742]

to note the m72 is no longer water tight after recompressing it

[@keijo8238]

Brings back memories of my conscription, the Finnish Army 66 KES 88 is the same weapon. The newer version 66 KES 12 is probably the best light AT weapon I have ever handled, very quick and simple to use and accurate as well, due to better trigger. Who knows, maybe the LAW you fired was a donation from old Finnish stocks.

[@wojszach4443]

when you need to bring law and order to chaos but you are all out of order

[@untermench3502]

My experience with the M72 is the delay between pressing the firing tab and the time of igniting the ricket. Those who are not familiar with this phenomenon tend to shoot low because the tendency is to lower the muzzle on firing. If you are familiar with the delay in firing, you will find it is quite accurate.Although the warhead is small, it is quite efficient.

[@piotrmarciniak3319]

Hey guys, on same day as video was released I messaged you that I found such part in Poland. Company says it would be available within 4-6 weeks. 100pln per part. Please reply how many parts you need and if such waiting time is OK for you.

[@I_lost_my_donut]

Let’s go the legend just posted!

[@Ian-mj4pt]

Hiya mate glad that you're showing the uninitiated in the weapons of war

[@Jimmy___]

I wonder if the connector is really necessary. Like what do all of those pins do? If there isn't some sort of complicated data transfer going on, they might just be voltage (perhaps more than one voltage) and ground. Would be worth poking around with a multimeter, or sticking some jumper wires in there + attaching the other side to a battery and seeing what is going on with each pin. My point is that you might not even need the connector, might be possible to just cut it off and re-terminate it. But beware that some cables with lots of shielding can be annoying to re-terminate because of the sheath on the inside.

[@elmoantero99]

its neccessary soviet autism plug

[@Kzhdwwa]

Thanks from Somalia 🇸🇴 ❤

[@Nick-hm9rh]

The Jugoslavian m80 Zolja almost works identical. Trigger and sights are horrible tho. The Zolja has no safety pin. To detach the covers you have to fold the rear one down and it flops the front one down with it and also pushes the extending tube out a few inches. Then you extend it, open the front sight post (its a clear see trough chart with distances ) and pull the safety back (similar to ar15 charging handle). then you just aim and shoot. If you decide not to shoot after Extension the m80 has the Same Button. getting it back together is kind of flimsy tho since the front cap is annoying to get back on The sling is permanently attached not like the m72

[@muellermartin9661]

Good to see, you're doing well!

[@_c_y_p_3]

Putin has nightmares where he wakes up to find two or three of you standing over his bed in the bunker.

[@Pedro-fd2xq]

Cannot help but I will keep sending a little bit of money every month… Take care bud

[@RasTecPL]

Good front line story, Val 😅 Stay safe!

[@tlmoscow]

I have a Ukrainian guy in New York looking for that part, we’ll let you know if we have any success.

[@kjellkriminell372]

Ive always thought the M72 LAW looks clunky and old. Maybe its better than i thought.

[@valgear5525]

same here

[@gbb1419]

RPG better tho?

[@JMclipsTV]

A lot of people don’t realize how light they are, 1/4-1/3 the weight of an AT-4. You can see a lot of photos from Afghanistan of guys carrying two on their back. I’ve read some Vietnam memoirs of guys who loved them for clearing bunkers since you don’t have to get it through the slit, it’s arguably more effective if you hit the outer wall and create a spray of spall on the other side

[@TheActualAltair]

@@gbb1419 Well RPG-7 is more versatile for sure and maybe cheaper.. But way way heavier and plus ammo for it.. I would take M72 for sure over that if there isin't more than 1-2 "targets" to shoot or a bunker or house/room to clear it and hell no i'm not shooting it inside of building either of those things, at least 50-100 metters away for sure..... And running with RPG-7 is way harder than with M72.. And it's "fire and forget" and rarely you would not to but it back in "safe" mode either if you do it's "rare".. That's my experiense in our army at Finland.. And our "Close Quater" rpg is NLAW and same goes the M72s.. But we use M72s and Apilas, NLAW and the Spike's generally.. But M72s are more common and easier to use and ditch it away..

[@gbb1419]

@@TheActualAltair 🫡

[@AsadAli022]

I love ur video these are very informative❤

[@bodkinrappallum6137]

Kraken hoodie, must be in the Kraken unit

[@sixfive9962]

I love your channel! Stay safe! Slava Natsiyi

[@maotseovich1347]

If someone could find the specs for that connector, I bet it could be manufactured fairly easily with a 3D printer

[@Mwwwwwwwwe]

Yeah was just about to mention that! and I'm sure the pins could be salvaged from xt60 connectors

[@Hnkka]

eandc . ru/pdf/rwn1 . pdf

[@seth1319]

eandc.ru/pdf/rwn1.pdf i think this is it

[@FixitFrank]

@@Mwwwwwwwwe xt60 pins are too large. I may have found some. Waiting to hear from the UA folks.

[@Mwwwwwwwwe]

@@FixitFrank nice dude!😊

[@Beekeeper_of_All_Trades]

i can make a model and 3D print the connector but I could not find complete technical drawings

[@mango7011]

Brother have you used the javalin. I would like to see how it work. I seen the N law video very intrested to see how they work,

[@FixitFrank]

I have asked a lot of people in Eastern Europe about this connector. fingers crossed.

[@phunkracy]

Is 'kraken' on your hoodie bc youre a part of Kraken unit???

[@vevenaneathna]

7:00 ,for cars here in the US we call this type of pin a cotter pin sometimes? but usually only if it is bent to stay in. not sure if it has a special name with this common shape? for that plug it is called barrel plug? it is like serial analogue signal and easy to make out of old wire/usb. i hope you can find or make a replacement. even like make out of wood its possible lol

[@Damian-Church-NZ]

Youre the man bro 🙌 💪 🙏

[@blubberking100]

Why dont you 3d print that connector?

[@riskinhos]

for the connector, why not manufacture it? 3D printing maybe? you can even make it out of metal.

[@garner2267]

You didn’t mention the safety switch when you were making the weapon safe. You got everything else.

[@theo_korner]

standart-pribor UA might have the connector in stock EDIT: Their website lists the connector as "in stock" and also ships nova poshta

[@prfwrx2497]

@valgear5525 check this out

[@marcgoetz4439]

@valgear5525 Up

[@mattfleming86]

My god I love the internet.

[@theo_korner]

@@mattfleming86 don't get your hopes up too early, we're still talking about a country at war, the website or stock database might not have been updated for months now.

[@mattfleming86]

@@theo_korner It is better than "crickets" Good luck valgear.

[@Dave-z1p]

I remember the rear sight being a transparent plastic piece but that was a late 80s version.

[@LMau-t9r]

5:25, do you retract the arming handle before retracting the tube? because its retracted in the next frame

[@valgear5525]

No, you do it as a last step before fireing

[@froginthewaves8450]

Godspeed!

[@Treblaine]

Hmm, one RPG7 you can reload or a bunch of these you don't need to reload?

[@Vetospeedo]

Goodluck man

[@mekajiki7861]

Does the firing pin striker lever return to the safe position during collapsing of the tube?

[@violakrone8429]

Hope you found the connector you needed

[@berserker6818]

Hey Val what plate carrier u using there grettings from poland.

[@Preyhawk81]

What me Fancinates the most is the firing sound. The rocket is so fast at launch moment that it sounds like an Canon not like the rockets we normaly know.

[@krasty6639]

Is that any official Kraken merch what i can buy for support? Stay safe

[@alexscarbro796]

Thank you for your videos. What causes the weapon to de-cock when you decide to collapse the weapon without firing?

[@stanleywilliams5343]

Now that was fun!!!

[@slowpokerodriguez3993]

Check that backblast area before firing...

[@ivank2025]

Stay safe, Mat 🤙🏻

[@tenarmurk]

Where to get the hoodie bro?

[@Oysteims]

Could be easier to install a new western brand push/pull receptacle to the NVG mount - and a new push/pull plug to the battery cable. LEMO has a lot of great push/pull connectors, and will be happy to sell you a single piece. I also really like the sub-miniature D38999 style circular connectors, they are similar in size to the russian connector it seems like.

[@mk12pickle]

If you have to open the NVG then it has to be purged again i am pretty sure. The western ones have nitrogen inside them and they are not really "field serviceable". Their best bet is to find one of the drawings of that connector and 3d print one.

[@Oysteims]

@@mk12pickle The power receptacle is attached to the helmet mount on this Russian NVG, not the monoculars

[@mk12pickle]

@@Oysteims right on.

[@Superwip]

​@@mk12pickle I was looking for drawings which are good enough to make a 3D model. It is easy find drawings but they are hardly good enough. I'm not sure if it would work if I printed one. Maybe I could ...try... to make a 3D model and someone in Ukraine could try to make the plug. Making it in Ukraine would furthermore reduce the risk of being delayed or lost at the border and if it does not work you could easily adapt the design. Maybe it would be possible and useful to redesign the plug in the process so that it uses western style crimp contacts (Harting or simmilar), which could be easier to source. I'm not sure if it would be useful if I tried to recreate one, then send it to Ukraine where it arrives a week or two later, if it arrives, just to find out that it does not fit... There are many great machinists in Ukraine, which should be able to reverse-engineer the plug. One that I know of because he has a nice youtube-channel is Engineer BrunS www.youtube.com/@EngineerBrunS/videos .

[@mk12pickle]

@@Superwip it needs to be 3d scanned I think, that saves a lot of time in reverse engineering a part. Though as the other user above points out the receptacle on the NVG is on the mount, so it would be easiest to replace the plug/receptacle combo to something else than wait for unavailable or reverse engineered parts... Mouser or Digikey provide 3d .stl of thier plug/receptacle parts.

[@biggie4310]

i found people on Reddit talk about it, so i ask for it there and see if someone can sell one or know how to find one.

[@biggie4310]

I have emailed you, need a picture of that thing. Cant link the video or say it's for you before i know who i'm dealing with.

[@AgentRaptor524]

Could you not build your own connector it would be extremely janky but it would work assuming that this connector is just a few metal pins going to the wires

[@AgentRaptor524]

It's also like 42 dollars on some Russian website called RAD TEK if you know anyone who is in an unsanctioned country to ship it to you

[@usernamehhhs4540]

What mask are you using?

[@davidjames1063]

I had fun firing M72. Not many can hit beyond 100m, I nailed a truck at 300m.

[@lupeooo]

👌🏼 in comparison to the thermobaric one time usage rocket launcher from the RPG factory, which you have reviewed, what do you think is more badass against buildings?

[@olaholtan9741]

if you didnt know the M72 LAW has allot of different models, and i have herd rumors about a thermobaric version being developed

[@WetworkWarlock]

Слава Україні! Героям Слава! Слава Нації! Смерть Ворогам!

[@EdjieboaNova]

Yay LAW!

[@Belikewatermyfriend2631]

Where are you from and in which unit did you served ? I am an ex-soldier

[@or6060]

i don't think you're meant to close it, just throw it away. also don't zip tie your tourniquet 7:30

[@Aman-lr9cv]

I dont think its zip ties its just rubber bands

[@ElectricSorrow]

Did you ever find these connectors?

[@_wojskowy_6324]

have you found the connector?

[@2011metalmaniac]

Part like that could be 3d printed I reckon

[@ssn22]

i was just to say !! it is really impossible to replicate that part ?!

[@nauticalobbyz-8972]

Would it be possible to make the round yourself?

[@acmelka]

I can't like this channel more.

[@hectorcelaya8225]

wait youre kraken special forces???

[@ОнтонКаричев]

Ви в Кракені? Чи це просто мерч від staff?

[@AlexanderSenese]

I'll buy those night vision for a high enough price you can get yourself a modern western ground based dual tube unit, no need for connector or adapter. Let me know.

[@mk12pickle]

it really would be pretty bad ass to have KA-52 NvG that were shot down in Ukr. Upsold for a set of good thermal or latest gen NVG

[@seductivesnake1]

Can’t ship anything to him from the us tho due to ITAR

[@AsadAli022]

I think komar is more easierand lighter than all please makr one more detailed video on komar and also explained that can we use all type of RPG rockets in komar❤❤❤❤❤❤❤❤❤

[@kylestewart4087]

Help me out here champ, that written part number doesn't exist... link? Website? Fuckin part name?

[@EZAZPI]

Emailed..

[@JwpGaming]

That weapon system is so drilled into my brain almost too well after running around with a bunch of training ones for the better part of 6 months. Regardless I never actually got to fire an exploding round, just the training model with a tracer bullet and one with a training rocket that has no explosive filler. Thankfully you can just toss them away in a real fire fight after use and won't have to pack them away, like in training. That rear cap clamp can be a bitch-and-a-half to get back on :D

[@The_Conspiracy_Analyst]

2:15 Valgear in combat with M72 for first time: kzbin.info/www/bejne/kKm6eqWZi7ena9U

[@valgear5525]

IAM laughting 😂😂 because it's my favourite movie of all time!

[@Manomed3]

O also Heard there were Turkish har66s in ukr service

[@AsadAli022]

Can we use all type of RPG rockets in komar please make a detailedvideo on it and also make detailed on all type of light lanchers❤❤❤❤❤❤❤

[@jf7393]

Are you not Ukrainian, or were you raised elsewhere? I ask respectfully out of curiosity. I have quite a few Ukrainian friends here in the US. None of them have your accent. I would have guessed you were Estonian or Finnish based on accent

[@GareyPongat]

In a deleted QnA he says he lived in Czech Republic for a bit but he is Ukrainian

[@metallusmelandril7380]

Hahaha ok Modafaka

[@DjordjeDjuricSRB]

1:18 that was Serbian m80 “zolja” 64mm rocket launcher

[@Nick-hm9rh]

yea they are commonly known as RPG 18

[@Echo_-tx9ve]

Plus plus

[@dukenukem8381]

7:23 you sound like two minute papers

[@strategicconsensus]

There is this KZbinr called "msylvain59". Dismantling old avionics equipment is pretty much all he does, including Soviet bloc gear. I don't know him, and he may or may not want to get involved, but I suggest reaching out to him.

[@we_all_are_crusaders2183]

My favourite part is when the weapon doing the kaboom

[@Mifiboi]

M72 law should be very easy to mount on drones, the norwegians did it but have removed footage from the web.

[@chamonix4658]

yeah Nammo, its still online if you search, fires straight down at the top of targets

[@threeoeightwadcutter2820]

Ist there any way to de cock the gun?

[@valgear5525]

I believe you just press back on the arming cube it have even small arrow with safe, and other arrow pointing forward with fire BUT on Vietnam eta laws it's strictly prohibitied to pull it back if already at fire, unfortunately I don't have LAW around at the moment to check and give 100percent answer

[@keijojaanimets4460]

Uhuu😆