My Airsoft Gun Isn't Shooting - troubleshooting guide - Valken Tech Vault

[@adamelam6385]

My kid is an Airsoft newbie and this video helped me get his Ak back online.

[@ramzi05lul51]

I just did it with an Ak too #newbie

[@TheCliqueGaming]

After watching this I found the wire has snapped off the motor but quick solder job and was sorted 👌 Thanks brother!

[@Whixzss]

this happened to me how do i fix

[@keithjacks1061]

This is the finest support video I have ever seen for any product. Great job!

[@sanctumrecords2580]

Motor positive wire disconnected. CLASSIC!! saved my day

[@sergiosamarine69]

So thankful for all the advice! Fixed my problem immediately.

[@anotherdayinthedirt7548]

Can you bring please take apart the whole gun and put it back together

[@cadrejeff]

Thanks! ill check out my G36C if its misfeeding or not, it was deemed not working but it still let out noises, i didnt really check if it was jammed or not though, thanks for the tutorial!

[@khelin4993]

So I cleaned the gun and made sure it wasn’t jammed but it still would not shoot I think it could be the bbs I used some that came with the gun and bought some for them should I send it or should charge the battery all the way

[@taylorlutz7158]

This tutorial help me fix my gun

[@cjcoolmoed]

Thanks my motor needed adjustment and worked again!

[@xxmozerxx1206]

At the end of the video you talked about the motor should spin freely well mine is doing that even when put all the way together

[@michal2270]

Hi. I have a question. Why not shoot a gun? When the battery is not completely discharged. It may be a mechanical error. Defenseless. At the same time the battery. ?

[@v3x668]

the bbs is not coming out from my magazine

[@sethparrow04]

So I have the Battle Machine Mod M and it was just working and when I go to shoot it again it will not make any noise. I have checked the motor connections and have checked the wire connections. I have also fully charged my battery and nothing seems to work.

[@taylorlutz7158]

Then you have to agust the motor under the pistol grip by untight it un till it fires it tells you in this video I tried it on my battle macine and it works beacouse I had the same problem as you

[@sethparrow04]

Taylor Lutz, I fully un tightened the grub screw under the pistole grip but it still won’t shoot or make a noise

[@sethparrow04]

Taylor Lutz, this is my guess on why my gun does not work, were the battery connects to the gun, I feel like at one point it was pulled on too hard and got disconnected internally. Thus why my gun no longer shoots

[@naomishaw4505]

This is what’s happening to me but I have an M4A1 carbine and I checked the fuse and chandged the motor and charged the battery and it will not shoot nor make a noise when I press the trigger I have no clue what’s wrong

[@sethparrow04]

Naomi Shaw I think my problem is the Motor, I still havent got time to replace it yet. It also might be the battery since it feels a bit under powered

[@antonhu2993]

every time my battle machine shoots, it makes some sort of grinding sound, and no bullet comes out. Any solution to that?

[@ValkenVideo]

Hi, Sorry to hear you are having this issue. Can you please email us a detailed description of what's going on to: [e-mail]. Thanks!

[@Hxxmocide]

Mine just makes a clicking noise when I try to shoot it and when I take the mag out 4-7 bbs fall out

[@Nmornbo]

Same

[@brunno537]

Me too ! Have you foind out wjat it is ?

[@Stephew.Vilayphanh]

I just bought mine today and it did that😂 can someone help??

[@AidenPetko]

legit fixed a gun thats ben broken for two years. thank bro your a G!

[@xoxoluvme]

Can you guys make that schematic diagram available? I was surprised my battle machine didn't come with a manual or at least exploded diagram and parts list

[@valkenairsofttech2724]

www.dropbox.com/s/ikzv90f72o6cn0v/Battle%20Machine%20Exploded%20View.png?dl=0

[@valkenairsofttech2724]

all manuals: www.dropbox.com/sh/ouehxwx3v21zpct/AAAHyOVmXg1LRETsh9EgK2Qsa?dl=0

[@xoxoluvme]

Thanks!!

[@vrx_timbered9070]

So I have a full metal AK and it was firing fine this morning I charged the battery and was shooting abt an hour ago and it sounds like it’s just revving the motor the amount of air coming out of it is the same but it’s only shooting the airsoft bbs like 25 feet, I have had the motor rev before on the airsoft field but it wasn’t shooting at all and I took it to them and they said it was the motor or the gears were loose but I’m wondering if this is different since it is still shooting, and if it is, how do I tighten the gears or fix this problem?

[@Fresh2day]

Hey I realize the video is kind of old. Just purchased a BB gun all metal Ekol es 55. When cocking it works fine but when trying to use the trigger it is pretty stiff and takes an extreme squeeze for the trigger to selectively work. When doing this the trigger does not spring back completely. I am thinking it needs lubrication. It is NOS new old stock style gun from 2012. Anyway let me know if you read this what I should do! Thanks much appreciated!

[@Christopher-N]

*ValkenVideo:* Video playback quality reduces itself partway into the video whenever it encounters an encoding issue in which the playback screen turns into large gray pixelated squares. When I put it back up to 720p, the video stops playing and I get an error message. If I leave it on auto, the video encounters the large gray pixelated squares, reduces itself in quality, and plays through the encoding issues without crapping out, though the encoding issues are displayed. This happens several times throughout the video. KZbin is not able to buffer the video properly (the gray stripe at the bottom that runs ahead of the red stripe); the gray buffer stripe gets stuck at the encoding issues. This video upload is damaged and should be re-uploaded. EDIT: (2:03) Even leaving the video playback quality on auto, the video still jams solid.

[@phantomgbeats1703]

I didnt run into this issue and I always use 480p

[@Christopher-N]

@@phantomgbeats1703: I posted that comment 3 months ago. I've since learned that others have similar issues-most commonly being the "Your browser currently does not ..." error message, despite most of KZbin playing normally-thus, the problem is usually not the video itself, but is instead KZbin. Good luck trying to get YT to fix anything. It still makes the viewing experience very frustrating if not impossible. I hate KZbin, but creators have not yet mirrored their content on other websites, so we're stuck with random videos refusing to play properly.

[@treywilbeck145]

Where could I send my gun to get it fixed? It is a 300$ ar that my friend gave me. Not sure what it’s called or where it’s from. And I’d rather pay someone to fix it, I’m guessing it is a hop up/jam because it stopped shooting mid clip one time. Tried using a rod and nothing popped out.

[@hermelin_dozral5311]

And what to do, when gun shoots only sometimes?

[@JordanTheMann]

My valken mk3 trigger isn’t releasing to engage the safe mode on the fire selector. I suspect there’s a weak or damaged spring in the trigger assembly. Is there an easy fix for this?

[@duckypoi5770]

What if my gun shoot one normal and the jams and sometimes my hicap overflows too and dont go always good to the gun

[@maartenpoel84]

Thank god my barrel was fine. the whole thing was packed full of jammed bb's 😅. Great video man, thanks👌

[@ValkenVideo]

Thanks! We're happy our video helped! Keep on shooting 💪🏼

[@batronnuncio2579]

I have a powerline model 93 CO2 i have a new air tanks But it won't shoot out BBs

[@teekay5413]

Is it normal that everytime i shoot my Airsoft at least 3 bbs stay in the mag and dont shoot

[@vblessed2x]

That happens to me but I don’t know if it is normal

[@tylerkozlowski5505]

If you mean at the end when u take ur mag out and bbs fall out that is completely normal

[@teekay5413]

@@tylerkozlowski5505 Okay thanks, but do you know why exactly? (I can't shot all of those which I put inside the mag)

[@tylerkozlowski5505]

@@teekay5413 yes, this is due to the magazines follower, if care so much about the 5 bbs that fall out at the end you can get magazines with an extended follower so you can feed all the bbs

[@teekay5413]

@@tylerkozlowski5505 Ok thank you so much

[@insexpeditionarybroadcast8393]

The gear on the motor wasn't welded on and it slips off everytime I fire, how do I fix this?

[@dcjennings4085]

This weapon if different because it's a akm bp gun I put my magazine inside and I try shoot the blue orbies not coming out please help I really need this working until December 31

[@CtredFoxdaddy]

if anyone can help when i shoot my gun it makes a weird noise and the piston in the gearbox does not move like its stuck? so the bbs just roll out the barrel when i shoot it

[@이재성-m1w]

Thank you very much I had a problem with my wires I had to stick it back in and tape it. Thanks

[@truaxtim7717]

Any advise on how to clean up the trigger contact? is the contact service-able? my problem is intermittent contact

[@ValkenVideo]

It probably has gone bad. It can be fixed by using a mosfet or you could use a part our tech suggested (link below): www.valken.com/products/rifle-parts-battle-machine-mod-high-temp-switch-assy?via=Z2lkOi8vdmFsa2VuL1dvcmthcmVhOjpOYXZpZ2F0aW9uOjpTZWFyY2hSZXN1bHRzLyU3QiUyMnElMjIlM0ElMjJ3aXJlJTIyJTdE

[@pillarist8517]

I've been winding my WELL ak47's mag for 10 minutes but no BB's show up at the top, i only received the gun 2 days ago but basically it looks like the mag won't load the BB's to the top so the gun cant actually shoot the bb, is it worth sending back the full gun etc or just buy a new mag and see if that works? Ty for this video.

[@dauntlessentertainment4922]

Did you solve the prob?

[@frost7724]

i have a lancer tactical LT-19 rifle and every time i go outside and shoot it a few bbs come out and then the bbs stop shooting and i made sure the magazine was correctly loaded into the gun and made sure the hop up was correct and i have to turn the gun upside down to shoot it and every time i shoot the gun the bbs don’t come out of the gun so can anyone give me a hint of how to make my gun work please?

[@tagleragle1511]

If anyone removed the fuse on the connection make sure you plug it back in that fixed mine

[@masonwalker6187]

I’m getting power to the motor and gear box and even after going through the full adjusting of the motor height it still will make a whining noise

[@ValkenVideo]

There's probably a good chance you have stripped out the bevel gear from firing too many times before adjusting it. If you bought your aeg from us and want to get a repair, please contact us at [e-mail]

[@masonwalker6187]

@@ValkenVideo I’ve checked the bevel gear it’s a gen3 lancer tactical I’ve had it for 2 days and I’ve shot maybe 500 rounds through it I want to fix it myself because if I send it back it will take weeks probably even a month to get back

[@gaugeboone2057]

This helped in a different way than its suppose to.

[@Vert671]

My rifle is brand new and is making the right noise but won’t fire any bbs I checked the barrel and there is nothing stuck in it and the magazine is in it properly

[@faithwiggins4391]

My brother is having the same issue. Did you ever find a solution?

[@Vert671]

@@faithwiggins4391 yes it turns out there was a problem with my mag and i needed to use a different one

[@nightking-ld5fe]

When I shoot it on semi it makes a high whining noise and doesn't shoot any bbs

[@orvin2vids]

when i connect the battery to the gun without the extension wire with the fuse, it works. when i try to use the extension wire, it fires slowly on full and then stops on single. Help Please!!!

[@leomarsubala115]

Ohh thanks for Video because my M4 didn't shoot but the BB lay down from Barrel.

[@MKO_otb]

Can y’all please help me. My M4 shoots arround 30 bbs and then the last 20 bbs are inside the clip and don’t want to fire can y’all please help !

[@jeremyforbes_sewell9097]

My gun is older than a year I’m trying the battery now hope it works if not gotta buy a new gearbox my motor works

[@frelon7566]

I got a ak47 and the beginning of the bbs shoot, like 20 or 30 and then they stop coming out even tho the blast noise is there, pls help?

[@ValkenVideo]

What mag are you using?

[@austingerardomonroy8545]

Well my gun is firing but it makes the same noise as if it has a jammed

[@beautifulsunflower835]

I am new to airsoft rifle and this video was very helpful. Thanks.

[@sparkrain3580]

I have a question and that is, when i take the Valken High cap mag out of my Valken everytime 4 BBs are falling out. Even when the mag is shooted empty and no BBs are in the mag. Can i do something to fix that? I have a Valken Battle Machine ASL Kilo Gate Mosfet S AEG, in desert.

[@miller4748]

Most likely these bb's didn't get pushed up high enough into the chamber to get shot out, that's common with most mags and not a problem

[@insipidoaf]

A few BB's falling out is normal with just about every AEG. It's because there's a little bit of space between the nozzle and the magazine, and those BB's are just 'floating' there, waiting to be pushed up high enough to get shot.

[@sparkrain3580]

Thanks guys!

[@knudelking9090]

Hey can you say my how long the nozzle of the Valken Asl trg is ?

[@cosmicflexed2223]

I have a airsoft pistol and when I put bbs in the mag, the gun puts all of them in there and it gets jammed. Now it won't shoot, any help?

[@southmoreconlin3757]

What pistol, I know how to tech on pistols to help you

[@classified4642]

Everything is fine but my gun only works if I shoot it upside down how do I fix that

[@ValkenVideo]

Did you try using the reverse uno card trick? lol, nah, but in all seriousness: which mag are you using? Hi-cap winding, pull chord, or mid cap? There's probably a good chance the mag isn't feeding or you're not pushing the bb's up far enough to feed consistently. If its a mid-cap mag its probably not aligned to the gun properly or there's a different problem.

[@vedovomistoproductions1921]

My gun doesn't load BB i guess... Don't know what to do

[@giligens]

My Mod-M jams everytime I am on the verge of emptying the mag. I have no clue why it constantly does this, and takes a while to get it out. Super inconvenient.

[@ValkenVideo]

Hi we're sorry to hear that is happening! Please send an email to [e-mail] or call us during our work hours.

[@giligens]

@@ValkenVideo I took it to the retailer for troubleshooting, and they fixed it.

[@SB-cu6lq]

Litterly a troubleshooting video

[@wesleytaylor9547]

If someone can help me, I was messing with my gearbox and made a rookie mistake, I forgot to keep the tension on the spring. But i got it put back together and It didn't work....... help 🙈🙈🙈🙈🙈🙈

[@ValkenVideo]

Hi you can contact us via email at [e-mail] ; ask to talk to our technician and you should be directed there with someone to help.

[@wesleytaylor9547]

@@ValkenVideo k thanks

[@Dualdito1]

Mine still not working 😥

[@drhodes97]

Mine is making a high pitch noise

[@immortal_clan7205]

Mine won’t make any noise at all it just dont shoot

[@lolsavage971]

My gun is only shooting like 2 bullets but then it stops but there is enough ammo

[@khabibus]

What if you have your battery in and a mag but the gun makes no sound at all

[@ValkenVideo]

check the fuse, and or call our support team at valken.com

[@dilmcgee2514]

Yeah same

[@dilmcgee2514]

@@ValkenVideo help us out here

[@khabibus]

Nvm it was the the battery

[@projectx2581]

When im winding it the bbs dont come up and when i look at my hop up theres like somthing like a party of the barrel blocking pllease helppp

[@maxlawley4342]

I’m having the same problem, you find any solutions

[@projectx2581]

Nah

[@phantomgbeats1703]

"Part of the barrel blocking" are u sure it isnt the nub on the hopup? Idk about the winding issue

[@MasterKief-fo20]

Shouldve showed how to fix when you squieze to hard on your cable... Now my rifle is fucked

[@bigbasshuntery2623]

Omg it was that my moter needed adjustment

[@tennesseecurtiss5741]

Once I removed the baseplate, all the connections were good and secure, and the motor was spinning freely when I pulled the trigger, but as soon as I put the baseplate back on, it stopped again. No noise, nothing. I’ve also checked the battery on another gun and that’s not the problem, and I tightened the motor as much as possible and it still didn’t make any noise, any suggestions?

[@insipidoaf]

If you aren't even hearing a click then the problem is electrical. Maybe the motor connections are being disengaged when you put the baseplate on? Try using pliers to close those connections a little more. If nothing else, contact Valken for help.

[@tennesseecurtiss5741]

insipidoaf thanks

[@Slope__209]

Thanks my gun was not working and then you showed us how to fix it thx

[@huddd_]

You are the best! Thanks man!!

[@Napoleon_Bonaparte1804]

thanks man I needed the help

[@noahmoah785]

Was putting back the pistol grip thinking I would have to send my gun back but then it started working lmao

[@caesarwallace3418]

My AK only feeds upside down, PLEASE help

[@maliksworld8467]

Mine too

[@entertainmentgabber8462]

Mine too man i cant understand why

[@korpit]

guys, my gun is just working on semiauto, any clues?

[@ValkenVideo]

Which gun do you own?

[@iiiiiiiiii1256]

My G36 X won't shoot

[@Ducky2o]

Thank you so much! Helped me fix my 500$ rifle 😅

[@BnNGarage]

hello but i don't have one of your airsoft guns but when i was shooting is was making vrrrr noise and when i tried shooting it a again it wouldn't shoot is the gears to tight or to loose please help me with my problem and i just got it yesterday for my birthday :(

[@Gavolak]

What if my gun won’t make any noise at all? Battery is plugged in but it’s as if it’s not. I know for sure that the battery is charged, and I’ve tried multiple batteries. Help?!?! It’s a classic army nemesis ME10. I’ve tried everything I could think of, help!!!

[@taylorlutz7158]

You have to use an Allen key for your pistiol grip gear box under your handel and untight it till it fires it tells you in this video

[@vblessed2x]

Thank you

[@alexswl9998]

it was jammed ty sir

[@zhu9638]

I was using my airsoft gun and the trigger just got loose after one shot there's no tension when I pull the trigger there's no sound and I can't put it on safe it's stuck on semi

[@ValkenVideo]

contact the support team at valken.com we can walk you through

[@xavierhatten9011]

THANK YOU SOOO MUCH

[@amberreese2186]

my gun will have ever right and I will pull the trigger it will go all the way back and still not shoot. what's the problem

[@TriggerFpv]

do you hear any clicking from the motor?? or is it dead silent?

[@TriggerFpv]

if you want to contact me directly send me an email at [e-mail]

[@frahnzenberg7561]

My mag wont fit it doesn't click in it's a mid cap .I have mod l version

[@Geetarman69420]

Mine instantly burns the fuse and doesn’t shoot

[@ValkenVideo]

Please email our gun tech at [e-mail] or use our live chat feature on our website in the top right corner.

[@kpophater]

Shit, wish should have seen this ealier

[@misttii1619]

THANKS SO MUCH

[@TomHack555]

Thank

[@johnbaptise2262]

I dont got no damn warning u bastards! Reeee