WHICH MUFFLER IS BEST FOR YOU? Valvetronic Designs vs. The Competition

[@e46rush]

Couldnt be any happier with my universal valved muffler from Valvetronic. Brutal sound at an affordable price. Its nice to see a proper comparison too, well done!

[@valvetronic]

Thank you so much for the support!

[@tas_aautomotive]

I just had my mufflers installed on my 2006 Pontiac GTO. I bought the car with a complete straight pipe(spintech 2.5inch exhaust with dual resonators and jba longtube headers) I loved the sound but I’m in California and work in a city where the PD hate loud cars. Driving it was stressful always looking over my shoulder for cops. These mufflers absolutely made me enjoy my car even more and I’m way more relaxed now. Definitely was worth the money.

[@usasupra23]

Please make another video comparing the other brands that use the same vacuum box, remotes, cases and why yours is better please. We are seeing many others that look exactly like yours with a different name stamped on it.

[@gabrielomar214]

I absolutely love my universal mufflers. I bought a pair for my cammed 2011 Camaro. This was exactly what I was looking for. Love how quiet it gets with the valves closed while also allowing you to be basically straight piped with them open. Definitely worth the money in my opinion.

[@valvetronic]

Thank you Gabe for the support brother. So happy you’re enjoying the kit on your Camaro!

[@JUS_lt1]

how’s the install?

[@gabrielomar214]

@@JUS_lt1 it’s definitely gonna have to be custom fab’d. I took it to a muffler shop to have them welded on.

[@ChaseBlack-p6m]

i drive a cammed G8 that is currently fully straight piped with long tubes. would these mufflers quiet it down quite a bit when closed?

[@Anon_Fox]

Totally unbiased 😂. eBay valves exhausts cost more than 40% less than a valvetronic and most are the exact same thing

[@andyreyes5674]

Very quality video, a lot of good information here to consider before making the obvious decision!

[@OTTO_Man]

is vacuum holding the valve open or shut? Curious on a dual system...1 pump and 'Y' in the line to each muffler?

[@valvetronic]

open, and yes Y

[@bensbimmer]

Thanks for sharing! So far so good with the Valvetronic V2 exhaust system!

[@valvetronic]

So happy to hear you’re enjoying Ben , thanks for your support!

[@MarcosGarcia-xg1rf]

Please help with an axel back config for my g37 coup

[@zazzn]

How about a noise comparison? The CHP would test closed-open for the different muffler sizes. That's the most important thing.

[@jaewonkim279]

No offence and love your product but the welds on the competitor valved muffler seemed much better lol. However, I care more about the reliability and leakproof of the valve when it is being heated and cooled frequently. Do you use helical style valves?

[@stephen3535]

How does the Valvetronic control box work? It's still a vacuum setup but doesn't pull vacuum from the engine? I'm confused how the valve is actuating.

[@valvetronic]

It is a standalone unit. It does not need engine vacuum. This keeps all electronics inside the car, not exposed to elements. It also allows you to control the valves when the car is off

[@ianounanian8990]

Thank you for your video. I love the sound of your catback system on the F80 is amazing. The only issue I have is that I currently have an active Autowerke single midpipe, paired with a Dinan Axleback. All that to ask, since you are showcasing, the muffler section only does that mean that you will begin to make Axel back systems?

[@valvetronic]

Unfortunately, the system will only be a full system. We recommend selling the other components and using that money to cover the cost of the new system. It’s a lot of work and it’s a lot of money but the sound quality and enjoyment you’ll get out of the system will be absolutely unparalleled.

[@romanmenocal3713]

Will the universal muffer fit on a mk1 audi tt? If so should I get the 2.5 in pipe?

[@valvetronic]

it could. You will need good fabricator

[@MrTurbo_]

I would love to buy a valvetronic t-style 3 inch muffler, but i just can't find a link to it anywhere

[@valvetronic]

will be available in the next coming weeks

[@MrTurbo_]

@@valvetronic What sort of timeline should i be looking at? 2 weeks? 2 months? If it's before the summer i'll get one, otherwise i won't have it in time

[@MarcosGarcia-xg1rf]

@@MrTurbo_update

[@Hexa8]

Good external comparison will appreciate you do internal comparisons what kind of layers you use compared to others as Magnaflow famous for its deep tone so they doing insulation in very specific order pl do guide on that aspect..

[@valvetronic]

Indeed, as our internal design is Patent Pending, we can’t showcase the internal differences but once the process is complete, we look forward to doing a full video!

[@Hexa8]

@@valvetronic looking forward to that all the Universal system 3inch or you offer smaller as well ?

[@valvetronic]

@@Hexa8 2.5 as well!

[@Daybreaker16]

So i brought the mufflers and placed it on the end of the car rear just by the tips but my car is so quiet even with the valves open i have flowmaster outlaw mufflers added to it in the middle what can i do to make the exhaust louder?

[@valvetronic]

Take those other mufflers out

[@Daybreaker16]

@@valvetronic doesn't the outlaw mufflers give it a louder sound?

[@valvetronic]

@@Daybreaker16 any muffler as per the concept of a muffler, is going to make the vehicle quieter. Remove them and see how the sound is

[@Dnasty1]

Are you sure your valves are opening? If the only thing you have is flowmaster outlaws and these mufflers it should be quite loud when opened. Outlaws don't do much.

[@Daybreaker16]

@@Dnasty1 yes the valves are open i see it

[@jessequintero4584]

I have a 2020 mustang gt just recently put a mbrp race version exhaust a lil loud so I was looking to get these mufflers would it be fine even with a aftermarket exhaust?

[@valvetronic]

You can absolutely install these in your aftermarket exhaust, we have tons of folks you do this and have a great results

[@DferrisNECCANCERFIGHTER]

I have read the Statutes regarding Exhaust mods in my State (Maine). It says it is illegal to modify the exhaust with Cutouts. I don't know if your Mufflers fitted with them is illegal as well??

[@theriseagainstfan01]

It's technically illegal to modify an exhaust system in nearly every state, but if you don't have vehicle inspections then you're fine. Ask some local car groups to get a feel for your specific locality

[@Papi_smurf_]

Quick question is the internal designs of the mufflers different on a active and non active exhaust? Or could i just use my active tips and slap a different axle back muffler?

[@valvetronic]

it is different, it is best to replace with our universal kit

[@kevinw979]

Does this come with any way to hard wire the switch? Not a huge fan of the fob set up.

[@valvetronic]

If you have garage door buttons you can program it to those! Mr. Carsounds did a video of hard wiring to a switch in his car, but it is pretty complicated

[@kevinw979]

@@valvetronic 🤯

[@giorgiopopcoman7087]

Very good I wanted to know if I mount your muffler on my Lexus IS 250 I don't lose counterpressure so I lose power

[@Jeff.with.a_G]

I love mine. Not a huge difference in sound except for certain rpm’s, but I’m sure that’s just my vehicle plus it still has stock midpipe. Is there a way for the valves to stay open when the vehicle turns off or does it just default back to open once there is no power?

[@MariaElena-z4c]

Guys dont get the cheap brand u always regret and pay more to realize that it would it been better doing it right the first time those knock off brands dont last the quality of the motor is garbagge they cant handle the heat u will waste your money get the original hes right

[@Anon_Fox]

Valvetronics are made in China and are the same as the rest of the “knock offs”. Just don’t cheap out to much and you’ll be fine

[@MrLuvtheUSA]

Just curious, if vacuum lines are bad, and electronics are bad, what in the world are YOU using at valvetronic? I wish you would’ve explained that

[@moochiehbtl_]

No they are using vacuum lines

[@sidneyjohnston4101]

the problem he had said is that it was running off of the engines vacuum lines, Valvetronic's exhaust uses a separate unit that pulls the vacuum so that you can keep it in the car and also be able to control the valve without the engine running. (good for cold starts)

[@jonathanlin4009]

So I own a 2019 a6 after 3k rpm it don’t have any sound besides the engine and closing the valve don’t make much of a difference any suggestions

[@Daybreaker16]

I mean you work for them i don't see you going to say something negative about your muffler system lol but does look better.

[@valvetronic]

There’s nothing negative to say ultimately, we’ve worked extremely hard to build the absolute best product in order for the consumer to have the best experience

[@mikeskidmore6754]

What kind of Ignorance would someone have to have in the Exhaust Industry when they hold up a Box with AKROPOVIC on it and say that it's not even a Brand Name? AKROPOVIC is the best know Brand for Quality and even OEM supplied exhausts in the Motorcycle Industry .

[@valvetronic]

The exhaust displayed in that section of the video is not from Akrapovic. This company simply used a box with that logo on it to ship their product, hence Akrapovic not being THEIR brand name.

[@mikeskidmore6754]

@@valvetronic I took a Wild Guess and thought maybe you were trying to imply that, but you did not explain that way.

[@mikeskidmore6754]

@@valvetronic My Great Uncle had a Stutz Bearcat that had a Manual exhaust cut off lever that could be accessed from the Drivers seat..

[@anarky305]

Do you guys have an android app for this besides the remote

[@Mastermindyoung14]

Boost activated dump: way cheaper, way smaller/easier to install, always closed unless you're under boost. Only "downfall" is you can't open it at a red light to impress the guy in the miata next to you.

[@spoolindsm127]

Where are you buying these that you're paying that much in shipping lol

[@72armydad]

Agree

[@Rc_impulse]

China man all the way lol I was wondering what he’s trying to say I finally understood he got them boxes inthe back ground bulk supplied with his logo repacks them in America they all the same mostly. 😂 obviously importing a single unit from Ali express will cost a bomb that’s heavy stuff as he doesn’t mention says “online” store blah blah. The plus side his rebranded Chinese kit in a great box has a good 3” dis and will honestly help compared to the rest.

[@samGD3]

Are you guys associated with Armytrix?

[@valvetronic]

no

[@IlliasAli]

Love valuetronic

[@Jo91.]

Meglio elettrica

[@devonhulen9990]

“Not even a brand name” *Shows Akroprovic, a reputable exhaust brand*

[@Sup_Evox]

Let me get a deal on one