Vampire Woodturning Project | Garlic Keeper 4-Ways project

Richard - • Richard Raffan turns a...
Mike - • Turning a Garlic Keepe...
Sam - • Turn a Garlic Keeper: ...
Enjoy
_________________________________________________
Harvey Europe
www.harveywood...
Harvey USA
harveymachiner...
Harvey Turbo T-40 Europe
www.harveywood...
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

[@glennnord2605]

A very nice and Beautiful box . I like the design box .

[@scottmedori1437]

I really like your design on this project

[@jimgill1105]

I thought it was a bit fiddly - but the finished piece is really unique - I like it!!!

[@glencrandall7051]

Very nice Tomislav. Canister type similar to Sam and Mike but very different lid. I like it. You guys are great doing this each month. great ideas from each of you. Thank you for sharing. Have a great day and stay safe.🙂🙂

[@tomislavtomasicwoodturning]

Thank you Glen

[@MarklTucson]

Very interesting design for this project. I really like how you hid the vent holes in the knob. That beech is very pretty wood. Seeing how you resolved issues with warping was very instructive. Yours was the final one of the four videos I have seen. Each one of you provided a really interesting take on this project. Thank-you all for your efforts for these videos.

[@tomislavtomasicwoodturning]

Thank you as always for supporting what we do.

[@baconsoda]

I like this very much. Great job! Best Wishes, Brendan.

[@jayscott306]

When I watched Richard's first I really liked the idea. I hadn't heard of a garlic container, before, but I always appreciate traditional objects that still could be useful, today. Then you took a great idea that I thought might be a humble dish with cover and it turned out an elegant and detail packed luxury item. :) Too bad about the split, glad it held. Very good first four ways in your new shop, Tomislav.

[@tomislavtomasicwoodturning]

Thanks Jason, it was fun to do and travel away from common usual work ☺️

[@walonguy111]

Really nice, great work as always Tomislav. I really like how you went from a rough design idea and refined it to your final version. That’s the great thing about creating, it’s not a perfect process, it comes down to the your own creative eye.

[@tomislavtomasicwoodturning]

Thank you very much sir ,I really appriciate that

[@michaelogden5958]

Satisfying to watch, for sure. Cheers!

[@robertreihsen9096]

Fun to watch!

[@jorisdemoel3821]

As always very interesting to see the four of you come uo with different ways to do the same thing. You overcame the problems (design opportunities) and turned them into a learning moment for all of us. Thanks for another excellent video.

[@stuartbruton48]

A fantastic deme from design to finish Great work Sir 👍

[@tomislavtomasicwoodturning]

Thank you sir

[@TheRekitter]

Nice design. Great woodwork as well as a nice piece of wood. I really like how most of your demos are in real time with no guitar. I learn something new from each video. Thanks for the lessons.

[@johnnyb95678]

This turned out beautifully and really nicely done. I really like the design and simplicity. Thank you for sharing the adventure.

[@Ray-DacaTimberworksWoodturning]

Great work Tomi! I love when you keep in the parts where you are working out the puzzle in your mind out loud. I enjoy seeing your thoughts on design and purpose, not just the end results. Good stuff buddy.

[@tomislavtomasicwoodturning]

Thanks buddy, I really appriciate that and I'll try to speak whats on the mind more in terms of design😉

[@qapla]

WOW! I have never turned a square blank that fast. Great job. It's interesting that all four of you did the garlic keeper and no one did butter. Your design looks just fine.

[@tomislavtomasicwoodturning]

Thanks ☺️ We now have butter keeper for another video 😀

[@cobberpete1]

I'm glad you changed the design. I like the modified version much better than your original thoughts.

[@racheldray1057]

You are too harsh on yourself! It's brilliant. Thank you for explaining the fit issue after the warping. Very helpful

[@johnwhitteron5296]

Superman pants again....😂🤣

[@tomislavtomasicwoodturning]

Thats how I role🤣

[@DancingFox6]

@@tomislavtomasicwoodturning Superman sock and waxy shorts…or did I get that backwards? 🤔

[@gregdownunderinOz]

Thanks tomislav. Very unusual box container. It certainly gave you a few troubles and problems. Your treatments of the warping and fit were extremely well done.

[@tomislavtomasicwoodturning]

Thank you Greg

[@randyrockwell6136]

Very nice piece! So many different techniques and problem solving tips in this video …… Thank you for sharing your skills and ideas 🤠🇨🇱

[@tomislavtomasicwoodturning]

Thanks buddy

[@PhilStevensphilongold]

Hi Tomi, great work as always - but could you do something for me (and possibly others) - can you brush all the wood shavings off your arms please. My wife says you look like the 'wood-shaving BEAR!' with your arms covered in flakes of wood. I'm sure you will look a lot better without your 'man glitter'! All the very best and please keep up the good work. Phil from South West England.

[@tomislavtomasicwoodturning]

😂😂😂 thanks Phil, I was never called bear before.... Its super hot last few weeks and working in smock is a no no so naturally shavings will cought up in arm hair, its normal and If I clean it all the time I would not have done anything.... Bear has thick hair as insulation,I have my shavings 🤣

[@PhilStevensphilongold]

@@tomislavtomasicwoodturning It was only said in fun - your are not a brear - but clean arms look nicer I think. After all it is your work that matters really. Phil

[@richardbufton3605]

Great job Tomislav

[@DavidBird-uu8km]

Very nice, I love the design, of see the other three.

[@jamesbrasseaux133]

I'm going to use this idea for a few projects I have.

[@joemulhollandwoodworking]

Great design and lovely work!

[@tonywatson5551]

wow lovely work. Great design

[@MikePeaceWoodturning]

Beautiful!

[@tomislavtomasicwoodturning]

Thanks Mike

[@kevinburrows735]

It’s really nice well done

[@_Egor_Egorov_]

Great, there are just no words

[@stevenhansen8641]

🕶very nice Tomislav.

[@tomislavtomasicwoodturning]

Thank you Steven

[@larrycresse753]

You are amazing Super Man. That is so awesome

[@tomislavtomasicwoodturning]

Thank je 😀

[@LewisKauffman]

Thanks!

[@billstoffle7383]

Looks great anybody wood love to have it on there kitchen counter

[@tomislavtomasicwoodturning]

Thank you very much sir

[@turningwiththewoods]

Nice. Enjoy it

[@user-zm8kb9ck5h]

Very Nice

[@DancingFox6]

About the beeswax - I’ve been able to find a small, inexpensive block of pure beeswax from people that make cosmetics. Anyone who doesn’t have beekeepers locally, maybe a cosmetics company could source some for you?

[@tomislavtomasicwoodturning]

Thank you,I have been using that for years😉 I'll find some more just to have it in stock

[@HSpoony8]

Beautiful shape and although I personally like simplicity over too much detail, you have done it very tastefully. Question: You mentioned about the issues with using cross grain. Would that not be your usual preference for a box? Thanks 😊

[@tomislavtomasicwoodturning]

Thank you very much. For smaller sizes , less then 80mm I like using endgrain orientation for boxes, for bigger stuff cross grain due to size and easier way to find wood for the job

[@HSpoony8]

Ah ok thank you for explaining 😊

[@billy19461]

Gauging by the noise your Harvey lathe makes I sure am glad I didn’t get a Harvey!

[@tomislavtomasicwoodturning]

New Bearings are on the way and spindle so I'll do a video on replacing. Its high quallity lathe ,I just got the one with bad bearings 😅

[@kenvasko2285]

I like the shape, it reminds me of an old fashioned aluminum cakeplate with a lid. I was hoping you would make a garlic keeper that is shaped like a garlic bulb. Just a thought, try shortening the top so the beads rest on the base. Where do you get your lumber? That was a nice looking beech blank.

[@tomislavtomasicwoodturning]

Thank you very much, It was one of the ideas. For these slabs I buy them at hardwood store,it can be expensive but the beech is on the cheaper spectar

[@pjseiber2774]

As always Beautiful work. I have a question about how much citrus solvent to tung oil do you suggest? And how long does it take for it to dry? ❤

[@jpncompany6275]

Spoiler alert! When I was watching your video, I was like Holy Crap he's turning in his pizza underwear! Whatever man, you've got more balls than me (literally) lol, but I'm not into that! Nice Beech box!

[@Bunk599]

I like the container and the video title. If you have no Vampires it must be working.

[@demonicsquid7217]

Yeah, but he now has an infestation of Frenchmen.

[@billthompson9482]

Great work, but that lathe bearing is very loud. Not a good advertisement for the manufacturer.

[@tomislavtomasicwoodturning]

It can happen, the new Bearings and spindle are on the way and they customers servise is awsome so far.... Lathe is super quallity,I just got the one with malfunctional bearings 😅, we shall see after replacement

[@danoo9159]

In my opinion, I don’t think that is a bearing. This lathe is run by a servo motor. Which makes makes a frequency noise as it constantly ramps up and down to compensate for torque demand. It is a lot different sounding motor than what we are used to anyway. But the frequency drive, is what I think we are hearing. The microphone naturally is picking up that frequency and it sounds a-lot louder on video than in person. IMO.

[@tomislavtomasicwoodturning]

Could be, new Bearings are on the way and I'll do a video on this so should be interesting to see if it makes a differents

[@lewisdye1002]

Please reply with your mailing address, bees wax will arrive shortly.

[@tomislavtomasicwoodturning]

Thanks a lot, but I did find online store here in Croatia, thank you anyway ☺️

[@_Egor_Egorov_]

Are you competing with other Bloggers? At the same time, 3 identical videos were released. Yours and your colleagues'. 1. kzbin.info/www/bejne/i5mYZmR-aNySZ5o 2. kzbin.info/www/bejne/kGLSqYCum8-bm6M 3. kzbin.info/www/bejne/bpiVlnqjeNmYg6s Your product is the most elegant!!!