How To: Remove and Reinstall the Front Fender (Scion tC2 / tC2.5)

🛒 Product link(s) at bottom of video description.
► 00:07 - Mounting Points
► 00:28 - Removing
► 02:30 - Reinstalling
How to remove and reinstall a front fender on a 2011-2016 Scion tC. Mike finally replaces his fender which was dented when he bought his tC. I wasn't able to get any good video of the reassembly process due to the dwindling daylight, but there should be enough info to get you through the process.
🎥 Bumper Removal Guide: • How To: Remove and Rei...
🎥 Wiper Cowl Removal Guide: • How To: Remove and Rei...
🛒 Pre-Painted Fender (Drivers Side): www.ebay.com/i...
🛒 Pre-Painted Fender (Passenger Side): www.ebay.com/i...
🛒 2011-2013 Fender Liner (Drivers Side): amzn.to/3f1N22N
🛒 2011-2013 Fender Liner (Passenger Side): amzn.to/3f1wRCJ
🛒 2014-2016 Fender Liner (Drivers Side): amzn.to/3tBIapc
🛒 2014-2016 Fender Liner (Passenger Side): amzn.to/3c7YGHN
🛒 Rocker Panel Clip (76924-52040): amzn.to/38ZnCiE
🛒 Fender Screw Grommet (90189-06013): amzn.to/2OSzoV1
🛒 Headlight Screw Grommet (90189-05142): amzn.to/3tEaoQm
🛒 Fender Seal (Drivers Side - 55794-21030): amzn.to/3cLtlK0
🛒 Fender Seal (Passenger Side - 55793-21030): amzn.to/2NynT4w
🛒 3M Molding Tape: amzn.to/3cUKVLs
🛒 Stanley 201-Piece Tool Set: amzn.to/2Y3eLpZ
☕ If you find this helpful, you can buy me a coffee at ko-fi.com/vamp....

[@wheredidmydadgo297]

never delete this video

[@ian562ADF52E]

Went looking for a guide, and ofc its Derrick. Thanks for all you do for the community!

[@PeteR90468]

Tight writing, no fluff, good quality vid!

[@joequillun7790]

I have a 2014 to do, with the exact same issue. (Except the bumper cover is off too). Thanks for the guidance.

[@michaelnapolillo7303]

The pops at the end though haha 🔥🤣

[@iiNobleHD]

Carbon fiber fenders, here i come 😈

[@SegmentationFaultCoreDumped]

I need to buy a new fender liner, but every place I find that offers it, sells it without the fasteners. Any idea where I can find any info on those parts? Thank you!

[@VampyreX13]

I actually have to replace mine at some point, but I picked up amzn.to/3zO2ny0 as it had various clips including the ones towards the rear of the liner as well as amzn.to/3vwdObb.

[@cocoonmaster]

@@VampyreX13 In the same boat. The 2nd product shows that it fits the tC 2005-2010 but not the 2nd gen. I'll let you guys knows if they work.

[@lechefski]

I ordered everything on the list here- are there any clips/screws that I'm missing if the connection between the fender and the bumper is broken from an accident?

[@VampyreX13]

I believe this should be everything you need. If not, let me know and I'll track down the part number and post a link here.

[@lechefski]

@@VampyreX13 I will, thanks Derrick!

[@phantomcomposites5534]

Great video! 🔥🔥🔥

[@ernestoruiz4946]

Hey man, I love how detailed your videos are & you're great at explaining everything clearly. Can you reply with the link/part number of the Toyota badge being used? Much appreciated!

[@VampyreX13]

He's using amzn.to/3AHQmc7 for the front and back.

[@ernestoruiz4946]

@@VampyreX13 Thanks a lot!

[@lindseyr7453]

How many hours did this take you roughly? I have to replace the same on a friends Scion and would like to know when to start before it gets too dark.

[@VampyreX13]

Filming makes the process take a lot longer, but you can probably knock it out yourself in 2-3 hours.

[@lindseyr7453]

@@VampyreX13 That's great news! Thank you for replying so quickly :D

[@VampyreX13]

@@lindseyr7453 let me know how it turns out.

[@r4ng3rownz8]

Just wondeing how do you match up the paint on a pre painted fender?

[@VampyreX13]

You can only match up the color code and hope that your existing paint isn't too faded compared to the new part. If you can afford a paint job, then it'll be best to take your car to a shop so they can blend the paint on the new part with the rest of the car.

[@ariwong6192]

Anybody know the sizes of all the screws and bolts? Im missing a lot on mine after crashing….

[@VampyreX13]

Go to Toyota and have the parts department look them up, but the majority of them will be the screws with 10mm heads.

[@griffinblevins3836]

Do you have a video on how to do the Bumper?

[@VampyreX13]

kzbin.info/www/bejne/nHrQp6hrqtahgtU

[@davemanzombies3853]

is this fender similar to the scion xb ?

[@VampyreX13]

I don't know.

[@TravisKlein1]

jack it up, get the wheel off for gods sakes

[@pmacc169]

how many curse words?!! one when he hit said deer, then disassembly oh my

[@VampyreX13]

It was poorly dodged roadkill. I'm sure there was a lot of cursing.