My current dream build would have the Ecoflow kit with a 48v Cruise n' Comfort air conditioner. I'd prefer to stash it away somewhere and keep the roof clear for more solar panels.
@jaydias72638 ай бұрын
Always love the videos you guys put out however, I'm confused, that didn't actually show how you connected it to the AC.
@VanLand8 ай бұрын
Thanks- good point. We are providing a cable to connect the EcoFlow Power Hub to the Nomadic AC unit. It's a terminal connector that goes into one of the the three battery terminals on the Power Hub. The other end is an Anderson connector to plug directly into the AC unit's positive and negative wires.
@PickledShark5 ай бұрын
Gotta love the plug and play capabilities here. I really just despise rooftop ACs though. Even though 7 inches is short for one, it’s still 7” on the top of a van that’s already 9’1” in my case. And of course now your roof rack space is reduced. I think I prefer the idea of an under mounted 24v Red Dot system that also works as a heat pump for heating, and pushes out more BTUs. This is definitely making me reconsider though, purely by the ease of setup.
@jodywatkins10378 ай бұрын
Ecoflow needs to make the batteries daisy chain like there Delta Pro Ultra that way you can connect more batteries and not worry about loosing one for the AC. Also like the way the new winnebago power max electric lithionics system works with the Ecoflow. Hopefully they will make that available to everyone or someone makes a kit to allow for this with the fast alternator charging too.
@brocio8 ай бұрын
You mentioned that this special cable connects directly to one of the battery ports on the power hub. Does that mean that the system can now only handle 2 batteries max? In other words, 10kwh is the maximin capacity? Thank you for the video!!
@kuliksworld5 ай бұрын
Thanks for making this. I learned a lot!
@VanLand5 ай бұрын
Glad it was helpful!
@onionhead57808 ай бұрын
Seems very simple to hook up but as a South Floridian I’m interested in how long an AC unit would be able to run on this battery powered system. I know there’s so many variables to consider that it’s impossible to give an accurate run time. Day vs Night, Temperature, humidity, van size, insulation and so forth but a low end run time and a high end run time would at least give us a guesstimate. Also I love the intel you provide for the DIY Van builders.
@VanLand8 ай бұрын
Let's say you install the X3 with a 10kWh battery pack and your batteries are fully charged. The X3 will pull, on average, 1000 watts of power since it cycles on and off (max power is ~1600 watts). A 10kWh system will provide 10 hours of run time in this scenario. 10,000 watts / 1,000 watts per hour = 10 hours If you switch to eco-mode you could possibly double that. Up to 20 hours. Besides just blasting the air conditioner, it's key to have good insulation (including window covers), park in the shade and have other ventilation options to exhaust hot air whenever possible.
@onionhead57808 ай бұрын
@@VanLandThank you! 👊
@NDpendentconnection7 ай бұрын
Wouldnt it be best to adjust the power inlet on the Ecoflow display panel, rather than using different size amp outlet adapters? I thought this was the purpose for having this option available with the ecoflow power kit.
@VanLand6 ай бұрын
You can only select 12 or 24v output from the Power Hub.
@jonathanmarc86297 ай бұрын
Great video sir, well done
@RamSlow8 ай бұрын
Finally! This will make the install much easier. Which battery size do you recommend with the x3 AC unit?
@VanLand8 ай бұрын
I would definitely recommend the 10kWh kit if you're adding an X3. Link: vanlandstore.com/products/nomadic-48v-air-conditioner-ecoflow-power-kit-bundle
@mikemotorbike42835 ай бұрын
I'd suggest painting it white. Black plastic in high sun will be hot as nuclear reactor. Which genius chose black?
@sherik2338 ай бұрын
Thanks for the great info! Was going to ask if 2 ac units would make sense for some Van's and then you answered that question right in the video. I plan on all of those things...pets in van, working in van, living out west.
@VanLand8 ай бұрын
You bet!
@roypateman4704 ай бұрын
We’re the special cable to connect it to the hub.
@watching-and-judging-you8 ай бұрын
So you have to sacrifice one 2/5kWh battery or the smart genny port for this, that’s a bummer. Seems a mini split is still the way to go 😞
@MichaelWilliams-ro9bm3 ай бұрын
The bumpises use mini’s. Join them.
@roypateman4704 ай бұрын
What about the heat side
@some______guy8 ай бұрын
thx for this
@geotrekvans7 ай бұрын
Awesome video! We just hooked up an X2 to a power kit and love the simplicity! Are you using a 150 amp breaker for the alternator?
@EpicVansChicago8 ай бұрын
So with the EcoFlow LFP Battery Polarity Adapter you showed it is easy to grab 48V DC from the battery and use CAN so the EF can monitor it but you did not explain how does one charge the battery??? Can you explain please?
@Espiritiv5 ай бұрын
2nd comment, You mentioned a 150A CB to connect the powerkit to the van alternator, but the Ecoflow Hub manual says 100A. Which is it?
@VanLand5 ай бұрын
100 amps but the charge limit was raised to 70 amps so a 100 is more likely to trip now.
@Espiritiv5 ай бұрын
@@VanLand I was always taught 1.25 x 70 amps = 87.5 >>>>90A fuse at a minimum, up to 2.5 is allowed if you have motors. So with the 100A recommended they are at 1.42X the 70A
@chadj42227 ай бұрын
With 50% of your installs being Ecoflow at this point, are they proving to be reliable systems? What percentage of customers are having problems? Interested in trying out Ecoflow but I keep hearing there are a lot of bugs that still need worked out.
@deborahbray93405 ай бұрын
How do you connect the 48V A/C to the power hub? I'm not sure we got the right cable??
@oasisauto26 күн бұрын
What’s good for semi truck ….need to last 8-10 hours
@VanLand18 күн бұрын
anything from Nomadic
@Espiritiv5 ай бұрын
So you dont need to install a fuse on the 48V battery side between the battery output and the 48V AC Unit?
@VanLand5 ай бұрын
Yes install a fuse or breaker.
@Espiritiv5 ай бұрын
@@VanLand Great, this is one bit of info missing from Ecoflows manual! Myseup now has a 12V bus bars to 12V Panel, and now i will add a 48v bus bar for any 48V loads like 48V AC, and 48V starlink
@roypateman4704 ай бұрын
Wouldn’t work in uk power hub only 10amps?
@Radzmisz6 ай бұрын
Is it possible to power Ecoflow battery directly from Nations 48v alternator?
@chriscarlson21658 ай бұрын
Great video. If I'm planning to use all 3 battery ports (ie. 15 kWh), can I still use the Nomadic 48V unit?
@Steve-yo4ld2 ай бұрын
How's does that all work if your system is strictly 12 volt! Any loss in performance with the AC as 12 volt? I'm trying to understand for a 7×14 Rv trailer I'm putting together! Awesome information!✌️
@edgeofnothing67Ай бұрын
I own one so I'll do my best. The battery is 48v and it has 3 48v output ports before the inverter. You are using one of those to send 48v to the ac unit. I have the exact setup he went over.
@DirtSickle14 ай бұрын
You prefer this over cruise n Comfort?
@VanLand4 ай бұрын
It depends on the application. CnC is better for full builds with cabinetry and someone who knows how to do the integration. The Nomadic is way easier and ultimately less expensive.
@joec.42388 ай бұрын
12 and 24 volt air conditioners are more widely available and often less expensive. Is there any reason I couldn't use a 48v to 12v or 24v converter to power a 12v or 24v AC? Also, does the power draw from the battery terminal appear on the app/console?
@VanLand8 ай бұрын
You could do that, but there would be power loss through the converter. The 12 and 24v versions of this air conditioner are marginally more expensive- not enough to justify a converter. Yes, the draw from the AC shows up on the console under the battery display.
@mollyfilms3 ай бұрын
Didn’t actually see the unit?
@luidabruin5 ай бұрын
Would this work with other brands of 48v air conditioners?
@VanLand5 ай бұрын
Yes, as long as the power consumption is within spec.
@RamSlow8 ай бұрын
Can you remotely turn on and off the AC if it's hooked up to the power hub, or does it needs to be hooked up to the distribution panel?
@VanLand8 ай бұрын
The only remotely controlled circuits come directly from the distribution panel. Since this method uses a direct connection to the Power Hub, you aren't able to switch on/off remotely. Of course you can use the AC's remote.
@tonyhernandez34333 ай бұрын
Will the DP 2 run the x2 a/c ???
@VanLand2 ай бұрын
No
@ed_beltran2 ай бұрын
@@VanLandwill the DP 3 run the X2 a/c ???
@JasonConroy6 ай бұрын
Can I run a 48v air conditioner if I already have a 12v electric system?
@VanLand6 ай бұрын
Not without installing a converter. You typically want to match the AC voltage to your battery voltage.
@thepatternforms8593 ай бұрын
If I want to run the S1 unit from nomadic (12 or 24V) can I?
@edgeofnothing67Ай бұрын
Yes there are 12? Maybe 13 dc 12/24v connection spots on the distribution panel.
@lkazanov5 ай бұрын
This is clearly the holy Grail, but you do need a 48 V second alternator for this to make sense.
@VanLand5 ай бұрын
Not really. Connecting to the factory alternator is working for everyone.
@lkazanov5 ай бұрын
@@VanLand Curious, you mean DC to DC converters in series, x 4? Have you done a video on that? Very curious.