DIY Broken Tombstone Prop for

[@TonyBullard]

Dang, when you said "dramatic reenactment" I was hoping for a Mrs. Van Oaks cameo.

[@VanOaksProps]

Mrs. VanOaks was hoping for a cameo too. 🤣

[@heartsongdjs]

Great video AS USUAL 😁😁 What is the best way to attach the clear acrylic to your Dremel?

[@capnskustomworks]

I know, right?!? They’re always so jaunty and fun! 😄

[@VanOaksProps]

@@heartsongdjs the version I sell comes with a screw on collar. If you’re making your own, you could use super glue or epoxy to mount the acrylic.

[@heartsongdjs]

@@VanOaksProps Thanks Derrick!

[@lynngordon5901]

Love the tip about using the watered down paint to fill in the letters. That sounds WAY easier. Very smart! Thanks!

[@TheSkellingtonGhost]

I realy love this idea! Realy cool what inspiration you can find in real life. This is giving me Frankenstein monster ideas too. Like a tombstone of different shades and names put together. Theor is a lot of story telling that can be done with this. I alredy have an idea of a Frankenstein monster/Lurch type crypt keeper that this would be amazing for

[@asmarteru]

Well done. I like to mix a little sawdust with my moss paint to add a bit of texture.

[@VanOaksProps]

Great tip!

[@David-mp6vc]

Its been decades since I redid my graveyard. These methods have stepped up my game in ways I'd never used or produced. Having a great time.

[@DarkDioStudio]

I love the “ Frankenstein “ look. Gorgeous

[@peterheynen]

This looks AWSOME! The idea with this metal parts is just great.

[@TheSmugglersRoom]

Fantastic build!!! We are dying to make some new Tom stones for our yard, this was perfect timing!

[@twistydogcreations683]

Get closer with the spray paint and LET it dissolve the surface. You can go light or heavy and get different depths of "carving". Let the solvent work for you. Done right it can look like sandblasted letters or deep cast letters. Love the repaired tombstone! One last thing. Marble and granite stones will get "gritty" as they age. Slate tombstones stay very smooth and make for great rubbings. Even after hundreds of years.

[@k1nn3y88]

This is how I make my tombstones

[@statesrights01]

As always, you never fail to deliver. I've made tombstones before but never did I try this idea. Love it! Thanks again for your hard work. :D

[@VanOaksProps]

My pleasure!

[@horses2by]

Wow that Tombstone looks amazing and so realistic 👏👏🪦⚰️🎃💀Thank you so much for sharing

[@VanOaksProps]

Thanks for watching!

[@KerriGilpin]

Very unique! Love the effect of a specific type of tombstone.

[@calebleland8390]

Man, that looks so badass. Amazing work, brother. 🎃🎃🎃

[@VanOaksProps]

Thank you!

[@TonyBullard]

This is DEFINITELY one I'll be trying.

[@FabWorks80]

Love how this tombstone came out with the metal banding!! Excellent build!

[@colemyst]

Another magnificent build. Thank you so much.

[@VanOaksProps]

My pleasure!

[@drscifi]

It looks so realistic in the end

[@EricAlder]

Next level: ANIMATED breaking tomb stone!

[@rickhager7684]

Very eye-catching. Love it!!

[@serenitynow818]

Mind blown. Wow. You’ve got game. So artistically creative 🎃💀👻👌👍

[@VanOaksProps]

Thanks so much!

[@factoriamarciana3757]

That looks spectacular 👏👏👏👏👏👏

[@donquijotedegranada]

spooktacular

[@VanOaksProps]

Thank you!

[@Crash64100]

Dude!! That is freaking awesome! I have got to try this! Excellent!

[@VanOaksProps]

Go for it!

[@howtohaunt]

That looks so amazing!

[@mikec2810]

Really cool build! Looks awesome!

[@VanOaksProps]

Thanks!

[@shamarrad]

What a great way to update old stones too! I have contemplated making a mortsafe-a cage over the grave to prevent body theft. Is this something you've considered making for the channel?

[@annmcneill5559]

Omg that's my local graveyard ! can't believe it's been featured on one of my fav youtube channels lol

[@bonniebordahoffecker4390]

Well done it looks old and broken and awesome.

[@VanOaksProps]

Thanks!

[@sosteve9113]

Stunning work,looks so real

[@VanOaksProps]

Thanks so much

[@mrscb5303]

Oh that was so beautiful!!🧡🖤🧡👻🎃

[@AlasdairGR]

Jimmy Diresta recently restored a tombstone on his property that needed a metal frame to hold the broken pieces together. Cool to see two of my favorite makers doing similar projects right around the same time.

[@VanOaksProps]

Cool! I’ll have to check it out.

[@meloneeleddington7664]

Very cool and a great idea, it came out amazing. Great job 🧡🤎💛🍁🍂

[@VanOaksProps]

Thank you!

[@willielipsey308]

Im gonna need you to add these fitted Van Oaks hats to the store!! They are 🔥

[@VanOaksProps]

I wish I could. I do, however, sell the iron on VanOaks Props logo patches in my etsy shop and you can apply them to the fitted cap of your choosing.

[@Bluebarnrustics]

Absolutely love your page and all your props especially the Halloween stuff!! If u have an Eric draven video build I’d love to see it as I’ve been wanting one of my own. I saw u had made one in the background of one of your videos . Again great work here some quality work !!

[@CaravanFarms]

I used the leftovers to make one that is crumbled down and the bits hanging at the base and all.... It added some old creepy to my grave yard!

[@blizatrex]

Looks great.

[@deoblo85]

turned out really good love that style of stone HFL!!

[@GregoryHaynes]

A great, unique tombstone Derek! How do you secure your tombstones outside so they don't fall over or get blown away?

[@VanOaksProps]

I made a video on that exact topic. Check it out: How To Setup Your Halloween Tombstones kzbin.info/www/bejne/oqbcm6OOasdoprM

[@FrancescaHoffman83]

I love this so much!!

[@LUV4TINK]

Way to go Gigmaster!!

[@thewickedpixel]

Great Build!

[@VanOaksProps]

Thanks!

[@603VIL]

Looks awesome! I've never seen a fractured tombstone held together with metal bands. Love the look. I'd love to see how you bore out the bottoms of your tombstones to add in the PVC for the rebar. Do you drill them out with a forstner bit? Thanks for sharing.

[@VanOaksProps]

Like this: How To Setup Your Halloween Tombstones kzbin.info/www/bejne/oqbcm6OOasdoprM

[@603VIL]

@@VanOaksProps yes. Thank you.

[@Chaedron1]

Great build idea! Rather than making the Tombstone from scratch you could use a decent store bought tombstone and do the same process essentially, if you don't have the time/energy/materials to do it from scratch.

[@VanOaksProps]

Good tip!

[@DARWINZOO]

Excellent. ❤

[@lisadubose6959]

You do wonderful work. Gave me great ideas. Thank you. But I have to say (a bit off topic) you sound like Casey Kasem. I keep expecting you to tell me the top 100 songs this week! 😁

[@vanderhoff66fu]

I'm so jealous of your computer and your vinyl cutter. I've made about 40 Stones like you make them but everyone has to be hand traced with different stencils sizes or shapes one stencil at a time with a magic marker

[@VanOaksProps]

I was in the same boat. I just got tired of doing it by hand and grabbed a vinyl cutter on sale. I'll never go back LOL

[@vanderhoff66fu]

@@VanOaksProps I totally agree with you it takes so long to do all the stencils by hand I have to draw a straight line so all the stencils line up across the tombstone on a straight line and I have to space them out by hand sometimes it gets really annoying LOL. Because of that each Tombstone takes me 8 to 10 hours . I work on them a couple hours after work every day I make around 5 to 6 per season. I buy two 4×8 x 2 in thick foam sheets.

[@monstermorguetutorials3139]

Awesome job

[@tal125]

That is amazing

[@thomasmaccalla9959]

Awesome

[@jbponzi1]

Great idea.

[@VanOaksProps]

Thanks!

[@jameycollins725]

Love your content! Could you please do a video on yard haunt vandalism and how to deter/prevent it from happening.

[@VanOaksProps]

It's not a one size fits all answer, but what I will say seems to be helpful is a fence of some kind. It's the one thing I've heard year after year from haunters that seems to keep people from doing any harm.

[@vanderhoff66fu]

These are great videos this is how I do my tombstones instead of the torch I use a heat gun but I have to be careful because if I put it too close and too hot it opens up the letterings, ugh. I use two coats of Drylok gray that usually works very well. A hand paint with full latex paint in every letter can take hours sometimes to do the whole Tombstone but I like it nice and bright so after my coats of weathering it takes off the shine a little bit to finish my tombstones I dry brush the entire Tombstone with white paint really picks up all the edges and the lettering perfectly just got to do the latest dry brush you possibly can in white

[@VanOaksProps]

That's a great method

[@cessers]

So good

[@3218675309]

That really turned out great. I’da bet it was concrete unless I was told otherwise.

[@pablow5549]

Great video. Very helpful.. Will you do a video of your display for this year?

[@VanOaksProps]

Thank you! Not likely. Our display rarely changes, so this video from 4 years ago is pretty close to what it will look like: kzbin.info/www/bejne/qqLWmqF6etqMrtU

[@timothyhutchison9247]

Always impressed with your videos. What is the vinyl cutter that you use?

[@VanOaksProps]

Thank you! It’s a silhouette cameo

[@wkayaker]

Amazing! The puzzlement to me is how you target the precision of the carved lettering with the cowl and leveling acrylic seeming to obscure the cut point? The result looks amazing but we can’t figure out how you see for the precise cuts!!

[@VanOaksProps]

Thanks! There’s a “window” on the collar that allows you to see the cutting bit.

[@vickiemullen660]

Thank you! Any reason you used the sand and paint instead of Drylock? Also, what do you use, and how, to hold down your tombstones?

[@VanOaksProps]

I ran out of drylok. Haha. I have another video on weatherproofing your tombstones that shows how we do it.

[@dawnaustin4556]

Love it!

[@VanOaksProps]

Thanks!

[@Raynestorm1968]

Can I please get a link for the attachment you put on your dremel? I don't know what they are called exactly to look it up to get one. Thank you for sharing this video.

[@VanOaksProps]

It's in the video description.

[@FordFalcon1962nBlue]

Hmmmm... paintable caulking? never thought about it, i had only seen or heard people use wood putty, spackling ( for some reason the paint always bubbles when i use it :/ ) and some other glues, i may switch to using caulking now, i did a tombstone ( video coming tomorrow ) where i pressed the Great Stuff' Foam into the cracks and let it dry, i used an exacto knife to carefully cut away most then finish sanding it smooth, i found that works but is far messier, how hard is it to sand caulking? i HATE those seams in the foam, if you dont seal them hard they'll re-open up and show through your paint and man that destroys a good tombstone, i appreciate these videos for tips so much!

[@VanOaksProps]

You can’t sand caulking, but you shouldn’t need to if you’ve applied it smoothly and paint over it.

[@FordFalcon1962nBlue]

@@VanOaksProps oh ok thankyou!!!

[@GHILLIESARCADEANDMORE]

Cool

[@woodturner1954]

Any chance to get the name of your starting theme song?

[@bobbeauter4504]

What was the rubberized spray that you put on the foam to help the paint stick?

[@VanOaksProps]

Plastidip.

[@classifiedfive4377]

What’s the material you used that imitates metal banding ? Thanks !!!

[@classifiedfive4377]

I apologize I didn’t bother watching the entire video. I found what material you used.

[@allen3776]

What bit do you use for delicate letters? How big are the letters?

[@VanOaksProps]

Dremel 194. The letters were about 2” tall

[@kjohnsonleedap]

Any other suggestions for easy DIY rivet heads besides googly eyes or molded hot glue?

[@VanOaksProps]

Rubber bumper pads.

[@JohnRaines-b3b]

Yes what color green do you use to get that moss color

[@VanOaksProps]

amzn.to/4ePK7GJ

[@mustafaalemdag3850]

How do you attach the plexiglass to the rotary tool?

[@VanOaksProps]

The acrylic is glued to a piece that is screwed on

[@jeffallen3382]

You forgot rust stain drips.