Vararam Air Grabber Air Intake Install

In this install, Kyle and Cory tackle the Vararam Air Grabber Intake. This aftermarket air intake pushes cooler air into your engine at a higher rate than your stock air filter and intake.
They walk you through the entire install, step-by-step, giving you little tips and notes throughout. If you are looking for a great guide for installing Vararam Air Grabber with a side of humor, look no further.
Want to order your own Air Grabber? Head on over to MidwestAftermarket.com/vararam-intakes.php
You could also order a great new intake by calling up at 1-800-951-3955!
Subscribe to our channel: / midwestaftermarket
Facebook: / midwestaftermarket
Twitter: / midwestamkt
Instagram: / midwestaftermarket
LinkedIn: / 10260310
Snapchat: MidwestAMKT

[@btroupe4371]

Watched this with the volume off after the first 5 seconds

[@michaelpincavitch5245]

Panel tool works much better for removing retainers !

[@matt416100]

Good video. You show the install very clearly with some humor some may not get but I liked it! Only thing you don’t show the leveling of the unit or exactly how it should sit with hood closed. Missed opportunity in some more humor!😂

[@chriswillyard8035]

Kinda missed the step of lowering the A/C line and making sure the intake sits level.

[@MidwestAftermarket]

Great catch, Chris. We'll have to add that in there. Certainly loosening the bracket holding the A/C line and lowering it a bit should help the Vararam Air Grabber sit more level. Might have to do a reshoot to show that step. Thanks again for your comment.

[@YngwieLesso]

@@MidwestAftermarket best way, is to leave the coupler loose that connects the filter to the engine, then lower the hood slowly, and let the hood level out the filter. then raise the hood, and tighten the hose clamps on the coupler..

[@do2423]

informative but a bit creepy!

[@craig4fsu]

Worst Vararam video yet.