PERLESMITH Universal Swivel TV Stand Assembly

[@randyg4571]

Thanks for the video. In my little constrained world I was not even aware of the existence of these swivel TV stands until I saw one at a friend's home. Was just researching them online and will be getting a PERLESMITH this week. Maybe a simple setup for some but there are those of us out there who need the reassurance to try. Again thank you.

[@VasylGladun]

Good luck. Thank you for your comment

[@PWingert1966]

Constrained? I'm going to start using that in my 9sq m apartment (aka size of a queen bed total, room with no view) I have two feet beside my single bed and two feet off the end. two plugs in the room and hte tv is at the head of my bed so I don't watch it and not fall asleep!

[@CatsQuest]

I just got my stand today and looked at the directions and put them back in the box!!! LOL! I'm happy that I found this video! Thank you!!!

[@ErelineClements-u5h]

Hi! I can’t thank you enough. This saved my sanity putting it together!

[@bizbarley74]

Thanks for this, I watched a few other horrible videos on assembly. Even though I bought a different model, and had a different type of TV, this video was still better than the ones I watched for my specific model and TV. I thought the directions that came with the stand started off very clearly and easy to understand, but then took a nose dive. Especially on installing the safety clips, which is rather important. Thanks for doing what the company did not.

[@Carolinakid1984]

Got this for 15 bucks and thanks to you it took an hour to put together, think one side is higher than the other but it's not bad. I really love this because mounting on the wall wasn't an option. Thank you!

[@amanda1500]

Thank you for sharing. This video helped. If you have a Sony 43" I would like to share that the bolts that come with the stand don't fit your TV so you will have to go to hardware store and purchase correct size. Due to this, my hardware store had correct dimension but not correct length, so I had to buy longer bolts and use remainder smaller spacers as shims to shorten bolt length so to not drive bolt to far in. With my TV the bolt holes are resest so I had to insert large spacer into slot, large washer, bracket, smaller washer, another spacer (came with stand), washer so screw doesn't fall through. I'm only sharing because I'm not very mechanically inclined and spent an hour watching videos without getting my questions answered pertaining to my situation. Yours was the best by far. Thanks again.

[@VasylGladun]

Appreciate the feedback.

[@holtkeeling332]

Thank you for sharing! I have a Sony and came across the same issue today! I thought I was doing something wrong.. would you mind sharing what size bolts I should look for at the hardware store to fit my 43 inch Sony? Thanks

[@rkgsd]

You explained/showed the final step of installing the two lock clips better than Perlesmith's own video!

[@VasylGladun]

Thank you

[@PWingert1966]

Living in a small 400 sq ft apartment and buying LG tv's with the feet at the ends of the tv this stand has been essential to avoid getting a larger cabinet to put the tv on. I also have children around that have tipped the tv while playing (I managed to catch it before it landed on them). This stand is much more stable than the tiny feet that come with most LG base model TV's

[@jessicaavilesjuan1267]

❤

[@alexrobinson8791]

Thanks. I could not figure out how the locking screws worked from the instructions. Your video cleared that up for me!

[@VasylGladun]

You are welcome

[@mrst6682]

Excellent video. Thank you. I loved this stand so much I bought another for 2nd tv. Someone else assembled the first one, I’m on my own with the new one. Your video was a huge help.

[@RalphMeurders]

Thank you very much!!!

[@phil52able]

Thank you, you made it easy !!

[@coffeecatsandsparkle]

Thanks so much for this! I was only stuck on the very last step but you solved it immediately! I'll watch the rest later to make sure I did everything else right just in case ;)

[@VasylGladun]

You are welcome.

[@reginahamilton124]

Great Video! thanx

[@VasylGladun]

You are welcome.

[@burieVropride]

thank you!!!! 🖤

[@VasylGladun]

You are welcome

[@RomeoEdward]

Thanks for your video instruction, I just bought one.

[@VasylGladun]

You are welcome

[@horacioalfano598]

Bought this stand for $15 at wally with free shipping. Pretty solid product.

[@johnkozel413]

GREAT VIDEO! Putting Mine Together as I Watch You! THANKS!

[@VasylGladun]

You are welcome

[@anitaperez8685]

Thank you! This is a great video. I followed you along and was able to put the Tv stand together. The company should pay you and put your video on their site.

[@VasylGladun]

Thank you. 😁

[@johnnyv7402]

Hello, greetings from Ecuador. Thanks for your video, it will work for a TCL 4k 50P735 2023 smartv. This support looks great. I hope it arrives in my country very soon.

[@beracahadeola2500]

Thank you so much. This really helped me. I thought I got the wrong one. I was so confused. Thank you very much

[@VasylGladun]

Glad I could help.

[@robertp.2586]

EXCELLENT HOW TO VIDEO!!!

[@SPARKALEEMAH]

Thank you for this.

[@VasylGladun]

You are welcome.

[@chrishight6598]

Fantastic video. This will be a great help when I assemble the stand this weekend. Thank you!!!

[@VasylGladun]

You're welcome.

[@daves5445]

Great instructional video. Going to put mine together today

[@VasylGladun]

Good luck.

[@harveyh3696]

Thanks, just ordered one!

[@VasylGladun]

You will like it

[@RudyBeavis-wx6oj]

This helped! May god bless you

[@VirtuallyKy]

Thank you, very helpful!

[@VasylGladun]

You are welcome

[@twill83020]

-excellent video. I was able to put mine together today. Very very helpful

[@VasylGladun]

Thank you

[@ilianamendez9554]

This side up is NOT the side to install. It jhas be the othe side? Am I wrong?

[@faysalkus1083]

I bought an odd vesa configuration. 100mm x 200mm so most stands don't work unless I start watching TV on my side. Lol. The stand you assembled just hooks over the stand once you have the vertical rods attached to the TV if I am understanding you?

[@VasylGladun]

You are correct.

[@stefarfa52]

I just finished putting one together and your video helped me a bunch. Thankyou sir for taking the time to do this. 😊❤

[@Ottomatic1]

I am not a fan of assembly but this stand is pretty slick. Useful and looks good.

[@VasylGladun]

I just love this stand

[@lindaschiavoni8433]

You made this seem easy and now I'm not afraid to try it on my own. I'm not good as assembly so I will keep your video on as I do my own! You walked through everything including the manual which I might not need to read too much as that will be more confusing! thanks so much!

[@VasylGladun]

Good luck 🤞

[@lindaschiavoni8433]

@@VasylGladun I also have a smaller vizio in my bedroom. Do you have a suggestion on what kind of stand will work on that? There are only 4 holes on the back?

[@VasylGladun]

4 holes that's pretty standard thing for all TVs. This one should work for your bedroom as well, unless you want to mount it on the wall. In that case they all are universal just pay attention to reviews.

[@molinagfernando]

Thanks for this vide

[@ilianamendez9554]

The very shiny side is the glass top and it has a label :this side up refering to the corrct side upward.

[@kizzieturner1927]

You did an amazing job on this video like I've been looking everywhere at every last video and yours is 💯💯💯💯💯💯

[@VasylGladun]

Thank you very much for your comment.

[@christygunter1941]

Thank you

[@VasylGladun]

You are welcome.

[@geangarcia5815]

TFS! Great Help. 👍😊👍

[@abdianoor202]

Thankyou so much I was really happy with your video struggled with instruction manual however you made it really simple ❤

[@VasylGladun]

You are welcome.

[@fredpope9325]

Thank you very much for a great video. How do you know what screws fit into the tv? Fred

[@VasylGladun]

In my case I used screws that came with the TV. In case you need to use spacers and TV screws becoming too short, you can use screws that came with that TV stand. Always try to use the shortest screws that will work. Otherwise, long screws will bottom out and you will not be able to tighten the bracket. But if you're asking about that thread size I'm not exactly sure but I think those are pretty standard and screws from the TV stand should fit any TV.

[@lorenzoelder6274]

Thank you. I was an hour into trying to put the stand together when I decided to go to yt. Pull up your video. Was finished in 15 minutes. I'm gonna try doing the other later This time no weed.

[@VasylGladun]

🤣🤣🤣

[@michaelsevens]

That cracked me up... 😁✌😁✌

[@PWingert1966]

I have used this stand for two tv's until I could arrange for them to be wall mounted. It's important to check your bolt depth on the mount points. There is a diagram in the instructions about this. If you get it wrong, you pull the mount points off the case and can destroy any chance of mounting your tv on anything in the future. I have had no issues with NEMA hole alignment but saw one review that claimed it. It must have been a misinterpretation of the directions. Also, don't use this as a tv mount outside. Repeated heating and cooling cycles can stress the glass base and cause it to spontaneously shatter resulting in your tv falling face first and being destroyed (seen that happen not pretty). Also try not to grab the tv by the sides only it can stress and shatter the panel (I saw this happen to one person. the new $700 tv was scrap) One hand on the bottom and one hand on the side can be done but is not ideal. Ideally two people using the top and bottom grip is best.

[@rango9404]

Thank you very much for the video super helpful!

[@VasylGladun]

Glad it was helpful!

[@anthonycasey605]

Thank you sir you help me mount my tv I was having a hard time until I seen what you were doing

[@VasylGladun]

You are welcome.

[@michaelsevens]

Thank you so much for taking the time out and making a video. It helped me so much. Seemed a little intimidating with all the screws and such and realize that not all the screws are needed. So seeing you set it up, helped all those concerns for me. Appreciate it very much. And I subscribed and liked.

[@VasylGladun]

You are welcome

[@duniasaada]

I have Tv TCL 43 in the middle of my room do you think is it suitable for this kind of TV specially its outputs is in the middle and tv will not falling and stand for along time do you think it is practical. I will buy one soon but iam confuse

[@VasylGladun]

If you are asking if this stand will hold your TV, the answer is absolutely it will. But the question if it's practical for you, I really can't tell, but it is very practical for me and I love it

[@duniasaada]

@@VasylGladun thanks alot 🙂👍

[@T_Tha_Goddess]

Thank you so much sir because I lost my instruction

[@VasylGladun]

You are welcome

[@横森た]

似たようなのを買いましたよ ありがとうございます(^-^)v

[@VasylGladun]

🤔

[@michaelsevens]

@@VasylGladun the person said they bought a similar one, and thanked you...

[@beatboxbrown103]

That you for the how to video👍🏾

[@VasylGladun]

You are welcome

[@blackhole99913]

What kind of TV stand is that? Not the Perlesmith, your actual TV stand. I like it.

[@depressedsauce2898]

Wish I could do my LG myself but the top are super thin. Leaves nowhere to grip

[@VasylGladun]

All I can say is good luck.

[@jewelquinones452]

what are the those rods called? I’m trying to find replacements. The things you put on the back of tv

[@VasylGladun]

I actually never saw it for sale separately only as part of the kit as a stand or hanging rack.

[@kimberlyboggs8154]

Don't laugh it took me 4 hours to do this my tv is older a 55 Inch Sony and so heavy. Plus I was watching my other TV while I did this 🤣

[@RobertPessagno]

How much space is there between the front edge of the stand and the front of the TV? I would like to get a stand that doesn't have the TV sitting back too far. Thanks!

[@VasylGladun]

You should understand that it will very depends on the shape of your TV

[@RobertPessagno]

@@VasylGladun Totally. I just wanted to get a general idea based on your setup.

[@zhanxianghua4648]

Hi, what is the size of this tv?

[@VasylGladun]

50" TV here's a video about it kzbin.info/www/bejne/q2q6aHdnq7GLhZI

[@caridumont2390]

You shouldn't lay your television flat on the ground.

[@jackeddemon]

Leans forward. So dumb. Terrible design

[@VasylGladun]

I love mine. Best TV stand I ever had.