Followed your instructions and got both headlights out, both lower torx screws were rusted and worn but upper ones were ok so I couldn’t get the whole lower section loose and the long screw that is under the slam panel snapped while removing on the osf. Haynes manual says to remove neck of filler bottle but access isn’t any better. Thank You 👍🏻
@aaanton114 жыл бұрын
Thanks for the great information👍🏻👍🏻🛠
@wot8219 Жыл бұрын
yeah sometimes having big hands is quite a disadvantage lol. i am glad if my 17 year old daughter is around when i do some repairs or wrenching as with her small hands she can reach some spots much easier and quicker 😂
@aaanton11 Жыл бұрын
😂 Thanks for the great comments👍🏻👍🏻🛠
@rga74824 жыл бұрын
Thanks for the video but I have a question. Dont you remove ALL of the bumper? I saw you removed only the upper and side screws, is it correct? (Because if its work than it would be very good because I dont want to remove all of the bumper...) Thanks for you answer.
@aaanton114 жыл бұрын
only the part on the side needed, Thanks for the great comments👍🏻👍🏻🛠
@rga74824 жыл бұрын
@@aaanton11 thanks very much.
@robertreddicen683310 ай бұрын
Absolutely no need to remove any headlamps. Just simply remove the fuse box cover and screen wash filler neck then rotate the metal clip. Remove the plastic cover and reach in with left hand and pull the bulb/connecter out. Disconnect the bulb and replace. 10 min job.
@aaanton1110 ай бұрын
Thanks for the great information👍🏻👍🏻🛠
@keithlink92452 жыл бұрын
I have very large hands and you dont need to remove the bumper. for the nearside you remove the fuse box cover and for the drivers side remove the air filter box. takes about 10 mins each. Don loads of these.
@aaanton112 жыл бұрын
Thanks for the great information👍🏻👍🏻🛠
@1982garyo4 жыл бұрын
Does the bulb tab thing go in facing the top
@aaanton114 жыл бұрын
Yes to the top, Thanks for the great comments👍🏻👍🏻🛠
@samroddie22234 жыл бұрын
somethings happened with your audio dude?
@aaanton114 жыл бұрын
thanks I need to remake this video, Thanks for the great comments👍🏻👍🏻🛠
@sicks6six5 жыл бұрын
Who ever decided to use a self tapper bolt instead of a location lug on the bottom of the headlight should be given his UB40. PS the bulb has a lug on it. That goes to the top of the apeture. .
@aaanton115 жыл бұрын
Thanks for the great comments👍🏻👍🏻🛠
@dashw900i6 жыл бұрын
The audio is so fucked man. Id redo this vid if I were you
@aaanton115 жыл бұрын
I will look into it Thanks for the great comments👍🏻👍🏻🛠
@naeem8825 жыл бұрын
The audio is terrible
@aaanton115 жыл бұрын
Massive apologies for the audio, the video has corrupted 🤯, thanks for the great comments 👍🏻👍🏻🛠
@marknewport99324 жыл бұрын
This is exactly how not to make a video, total rubbish.
@aaanton114 жыл бұрын
sorry mark the sound corrupted on upload, but I have left it up as the original was lost, Thanks for the great comments👍🏻👍🏻🛠