Excellent video. Just changed the discs and pads after watching this, nice and easy apart from stuck on wheels which took a bit of an effort to get off. Many thanks
@alanodonovan39192 жыл бұрын
Just done mine after watching your video. Took some perseverance with a hammer and some leverage to release the old discs, but got there. 👌 Excellent video. Much appreciate
@brierleydecorating9 ай бұрын
Just changed mine thanks to your video. Only problem was the discs stuck onto the hub, plenty of Wd40 and hammering got them off. Thanks a lot for the help
@simonpratt17162 жыл бұрын
Just finished changing the front discs and pads. Performed courtesy of your video. Thank you both for taking the time to upload the video.
@micmut82714 жыл бұрын
Excellent video. I´m changing brake discs and pads on on my Renault Trafic tomorrow. I know what is waiting for me now. Many thanks.
@yensabi5 жыл бұрын
Great video , my local garage wanted £ 250 to change mine , after watching this I'm going to do my own......👍 Good idea about the part no's . Cheers mate
@motomash61434 жыл бұрын
Your local garage sound like pikeys lol. 250!! That's unreal... its literally a half hour job. Hope you got them done okay mate 👍
@yensabi4 жыл бұрын
Hi mate , yes I did thanks to this great how too video , I took my time and did both sides on a Sunday afternoon , I have since replaced the back brakes also which where a bit more of a challenge but turned out good.......👍
@nigelparish26313 жыл бұрын
Really really great video and commentary. Crystal clear with fabulous advice. Thank you for making it
@MrJackd814 жыл бұрын
Good video, will be attempting my own brakes now. Saved me a few pennies
@bartlucchini5 жыл бұрын
Very useful video! Thank you!
@Nutberg20 Жыл бұрын
Thanks for the upload mate 👍🏼
@guinnessdublin46693 жыл бұрын
Well explained walk through video Thank You!
@goranfatah83613 ай бұрын
Thank you
@bennoben1653 Жыл бұрын
Great video gents , thanks for sharing 👍
@radasjast89 Жыл бұрын
Never put the grease on the hub.
@frednetherlands8873 жыл бұрын
Thank you. Also good advice on the part numbers.
@remingtontanner50043 жыл бұрын
InstaBlaster...
@Sellmyowngranmother Жыл бұрын
Class gonna do mine soon 👍
@paulgettings4134 Жыл бұрын
Well explained thanks
@edonja783 жыл бұрын
Please tell me which impact wrench do you use? 
@shuttlefish596 күн бұрын
I am going to give it a go thanks... is one grunt a torque measurement? 😂😂😂
@geoffreyking23822 жыл бұрын
Wouldn't of used the cheapest discs and pads going
@jafahia4 жыл бұрын
Excellent, thanks. Need to do all 4 of mine. Is it the same procedure on the back? Also, what head did the disc secure screw have, star? Tia
@willber3183 жыл бұрын
The rears need a wind back tool which you can buy from screw fix for 15 quid
@nathanwhiteside95022 жыл бұрын
top vid cheers pal
@ignaciojaimealaman36643 жыл бұрын
Saludos desde cuautla morelos México
@williamusher4 жыл бұрын
easier to use an s hook than a cable tie
@cristealiviu6948 Жыл бұрын
Hi ,do you have to do the brake bleeding ,after ? Thanks
@repairrestorefixer1242 Жыл бұрын
As you are only pushing the pistons back in to the calliper, you do not need to bleed the brakes when you have fitted new pads. Just make sure you pump the brake pedal a few times after you have fitted calliper back on, this will ensure new pads locate where they need to be.
@cristealiviu6948 Жыл бұрын
Thanks for that !👍
@retrorecordings4 жыл бұрын
Thanks
@toppertruthio5 жыл бұрын
Any chance of a link mate to where you got these for that price.Even the drive tec site doesnt recognise the part number?
@repairrestorefixer12425 жыл бұрын
The ones I bought and fitted in the video may not be available anymore. But I had a quick look on eBay and found this, search item number 303031478497 if I was to do the job again I would purchase these discs and pads. £48.99 including delivery. You need to supply them reg number to make sure they are correct for your van. Hope this helps. Good luck.
@toppertruthio5 жыл бұрын
@@repairrestorefixer1242 cool mate,ill give it a go.cheers ,and thanks