You are nuts man... 7 months and all using hand tools from what I can see... and I almost cried when I saw that broken but I’ve had to struggle with that before
@oxagon_6 жыл бұрын
Congrats on 5k dude!
@oxagon_6 жыл бұрын
Also if you take the hinge off, you might be able to twist the tap out and not have to drill it out. When tapping, if it gets really tight, you might need to break the chip by twisting it back out a little.
@willwastaken6 жыл бұрын
Congrats dude! I've been here since you had 1.9K subscribers and, since then, your channel has grown so quickly. It's crazy how fast the past 4 or 5 months I've been watching have gone by. Can't wait to see this thing finished! Keep it up :)
@PittsburghVaydor6 жыл бұрын
Wow you’ve been here for a while, thanks for sticking around and supporting the channel!
@PittsburghVaydor6 жыл бұрын
Wow you’ve been here for a while, thanks for sticking around and supporting the channel!
@willwastaken6 жыл бұрын
No problem! :)
@brynwilliams68686 жыл бұрын
congratulation for 5000 subscribers and more forward progress.
@Lucasishot1006 жыл бұрын
You really care for your subscribers! Great video!!
@JayWeldy6 жыл бұрын
Looking good! Happy 5K too.
@okiedoak2016 жыл бұрын
Nice video....but how was the hinge aligned for proper placement before drilling...and im guessing there is some sort of assy manual
@sew04ss6 жыл бұрын
Congrats bro!!!
@Otzkar6 жыл бұрын
The 5k subs were long overdue.. congrats for finally making it
@SurgieStudios6 жыл бұрын
Congrats on 5k. I wish I had that many. :(
@robertrthornton19876 жыл бұрын
I am following because I want to do this build in the future."if I can ever afford it" in the mean time I'll follow and dream.
@xxzombiegorila3 жыл бұрын
Hay, I’m looking at getting this kit, have you had any problems with it?
@meshmallow8846 жыл бұрын
Hits 5000 goes down to 4999 XD. Just kidding congrats dude I have been watching ur vids since the start and I’m stoked to see your progression I hope all goes well and I will continue to watch your vids
@punkinsgarageandpaint82996 жыл бұрын
How do you know the location on the car for the hinges?
@firebreather0506 жыл бұрын
I have the ones matt sells, its like night and day, and very smooth.
@MrPallwaul Жыл бұрын
I wanna check it out. Any links?
@firebreather050 Жыл бұрын
I'm sure there is a link, but I don't know where it is, or if they're still in business.
@MrPallwaul Жыл бұрын
@@firebreather050 Aw that’s a bummer I really wanna check it out and compare them together! :( vertical door seems kinda promising though. Claims to be bolt on only 🤔
@wrxsubaru026 жыл бұрын
What do you mean return the tap and die set??? You didn't even oil it and it broke because of you lol so why would you return it?
@chvybeatsford6 жыл бұрын
This guy has a point. It didn't fail because of it's self. It failed do to in correct usage. Just buy the tap needed and move on.
@PittsburghVaydor6 жыл бұрын
because they accept returns even though it was my fault, no reason to keep the broken pieces if they'll take it back
@wrxsubaru026 жыл бұрын
You should have kept it because this is just wrong man... You broke it so accept your loss and do better next time.
@chvybeatsford6 жыл бұрын
But you only need one tap. Small amount to pay to complete tap set. But to each his own. Guess u need to save money some where .
@nghtmre48716 жыл бұрын
Happy 5k 🎉🎉🎉
@abdulsaadiq16516 жыл бұрын
Many congrats on 5000+ Subscribers, Bro. Your content is gold!! Your “Pittsburgh Vaydor” intro video made me think a little in terms of customizing the gauge/speedometer/RPM. Is there a way to buy and replace it, and customize it digitally? If so, it would give the car a personable look and would be a great way to manually adjust the car’s top speed the more the engine/HP changes, odometer and a Vaydor logo feature (optional). A total “Hmmm” moment 🤔 Wonder if most people keep the stock G35 gauge after the completion of a Vaydor? #JustWondering
@PittsburghVaydor6 жыл бұрын
Yes there’s custom gauges you can install, some go with a digital dash and others get the kit to change the look of the current cluster
@abdulsaadiq16516 жыл бұрын
Pittsburgh Vaydor - Great stuff!! I also can’t wait for your interior design and exterior paint videos. Seeing that hinge mounted is such a huge step forward. Dude, you so have to host a private viewing when you’re done for your fans/subscribers lol. Thanks again for the gauge cluster/kit info. I’m gonna personally start my build before the year is out God willing because it feels as if you will complete it by then. #TeamVaydor
@PittsburghVaydor6 жыл бұрын
Once the cars finished I plan to host a few cars meets so local subscribers and friends can come to check out the final result, I've been scoping out a few Pittsburgh locations recently :)
@abdulsaadiq16516 жыл бұрын
Pittsburgh Vaydor - Sounds great!! I hope and pray it’s around the time we play you guys (Steelers) the second time this year in Pittsburgh lol. I’m a huge Ravens fan btw 😅
@jochirod17346 жыл бұрын
Awesome dude ur my inspiration I'm gonna do a project like yours in a near future
@blwilliams6626 жыл бұрын
First and foremost congrats on hitting 5000. Second the tap is the part you are using to thread the holes and a die is the circular part its is used to thread a rode. I think you were using the correct technique, but you should do a half turn when cutting and then back out after 2 maybe 3 full turns back all the way out and clean debris. Repeat until you reach desired depth or through the hole. ******Use Lubes****** it help with maintaining parts with drill bits and tapes. Good luck and congrats again.
@PittsburghVaydor6 жыл бұрын
Thanks for the tips! This was my first time using a tap and die set so I’m still learning
@jacobjackson16006 жыл бұрын
You need to use some form of cutting fluid when tapping holes. The friction creates a lot of heat and will lead to tool failure.
@PittsburghVaydor6 жыл бұрын
I’ll pick some up when I get the new tap and die set, thanks!
@asifmohamed32072 жыл бұрын
What pound shocks your hinges is using
@jacobthereceiver3975 Жыл бұрын
Whered you buy the hinges ?
@amdeus6 жыл бұрын
5k!!!!
@ok37816 жыл бұрын
Cant wait
@hussammustafa52676 жыл бұрын
How do you know if the hinge is straight or not?
@MinionnitrousBHPtoBHP3 жыл бұрын
How much and wear do u get them from
@rajpandit28863 жыл бұрын
Hii Bro ...Where from I can buy this door hinge..plz reply..
@ballzmckgee31672 жыл бұрын
eBay dood, 212 bucks..
@WWargasm6 жыл бұрын
Yesssss
@bakedbeard42036 жыл бұрын
Finally 👍🏼
@roderikyerielisaiasdiazcor97166 жыл бұрын
Amazing
@pimbo19995 жыл бұрын
where can you buy this?
@theradgamerx3 жыл бұрын
I’m get 2004 infinity g35 hopefully I get some money make it like his 😭 my broke ass
@Jd-wi9ry3 жыл бұрын
Does anyone know if these hinges would work in a 350z???
@YTJensengaming4 жыл бұрын
How much
@yutakasama93536 жыл бұрын
250 ebay hinges... dude you gotta stop using cheap ebay parts
@rodrieguz6 жыл бұрын
You really need to have the door alignment before you mount that hinge.
@spcltee666 жыл бұрын
rodz_rydes i was thinking the same thing..if it loose he can shim it , if its too tight he has some work coming
@PittsburghVaydor6 жыл бұрын
I dry fit the door and marked it up off camera for where the hinge needed to be
@innovationhub48166 жыл бұрын
How to buy?Pls.suggest to me.
@steveschaeffer96236 жыл бұрын
I heard the cheap hindges wont work with the newer wider front end. The door/hindge will hit the front end. I will be building a vaydor in the future. I have extensive knowledge with paint/body/welding/mechanical etc. If u have questions hit me up.
@PittsburghVaydor6 жыл бұрын
I’ll have to test fit the front again and see for sure, and if I have any questions is there an email I can reach you at?
@steveschaeffer96236 жыл бұрын
honda_600_f4@hotmail.com I'm in PA also. Very curious if they fit. Cause for the price i was thinkin ebay kit and fab it if needed. I fab a lot of stuff but pretty sure thats cast iron so i wouldn't weld it, in that case but probaly could... worst case the door falls off i guess. Lol. But I was thinkin I may end up casting a new arm or adapter or something to make it work.
@PittsburghVaydor6 жыл бұрын
I’m fairly certain it will fit, if you check out page 2 of this forum they’re using the same hinges: www.madmechanics.com/forum/build-diaries/18396-how-vaydor-bodykit-install-thread-2.html
@jochirod17346 жыл бұрын
Any news on the spacers for the wheels?
@PittsburghVaydor6 жыл бұрын
Already ordered, they’ll be here soon
@neural10236 жыл бұрын
you doing corvette next lol
@PittsburghVaydor6 жыл бұрын
I’m considering it haha, no promises
@dionnetnunez20926 жыл бұрын
dude make it like the one in suicide squad with the chrome purple wrap and give it like bmw i8 doors
@MitchellGuyon6 жыл бұрын
Tap, you tap a hole you use the other to thread a bolt...
@verticaldoorsincusa3 жыл бұрын
I don't know why you guys would build such a badass custom supercar and put these cheap chinese hinges on it. such a shame. Contact us if you want real quality and ask for Nick. With the chassis you you use to build these, you could use the kit we make for that particular car and bolt it directly on. They cost a little bit more, but its worth every penny for a high quality American made product.
@balduberdriver2 жыл бұрын
a vid to make 4 holes
@danielmani60383 жыл бұрын
Available bro
@diegojosephia6 жыл бұрын
at the time of the videp your subscriber count and your watch count is the same 6.5k
@diegojosephia6 жыл бұрын
but yeah congratulations. and what i know i was there a long time back something like part 3 since. but it made so much progress the vaydor and the channel. the reason why i watch it thos late is because the internet was down for a couple months and vacation