VCarve Foam Sign - ShopSabre CNC

[@larrytaylor1358]

Keep these sign videos coming please. These videos are always a cut above and one of the main reasons is that they are not only a how to but the whys are included for deeper a understanding of the job at hand.

[@shopsabre]

Thank you for your support! We will keep them coming!

[@JohnColgan.]

Looks great, don't forget to switch on the dust collection!

[@shopsabre]

We turn the dust collection off for the video so it’s more interesting to watch! The dust dock works it’s magic though after!

[@JasonPeltier]

In VCarve, you can make your profile cut 'do separate last pass' and add a tolerance in the dialogue box. In all but the last pass, it will cut 0.02" larger or whatever you set as your tolerance. Then the last pass will be the final dimension. You can also set to reverse the tool path if you'd like to switch from conventional to climb or vice versa. Check it out!

[@shopsabre]

Thank you

[@kec8582]

How did you prep the signfoam for good oramask adhesion?

[@shopsabre]

For us on this project we didn't have to do much prep on this as the adhesion was natural based on the proper masking.

[@the_rolling_jedidavidsherm583]

Can you put wood inverts into this foam for mounting an eyelet bolt for hanging on a sign upright??? I was going to use 1/2 in treaded eyebolt

[@shopsabre]

We specifically specialize in CNC manufacturing, we aren’t as advanced on all the processes that go into specific sign construction outside of the Machine but if you need holes drilled for inserts the ShopSabre can do that as long as the tool can reach the area on the material you require

[@Christopher_225]

How do you change text to lines and arcs?

[@arckraftllc2604]

With the text selected hit the Convert to Curves button (the T button w/ an arc under it)

[@shopsabre]

Select the Text - hit the Convert to Curves option. Checkout all the Vectric Tutorials on how to do these type of things.

[@calebstrickland8588]

What are you using as a mask on the top of the foam?

[@shopsabre]

ORACAL ORAMASK 813 STENCIL FILM

[@lorienmalacek1049]

What paint do you use?

[@shopsabre]

We have a paint booth that we use to paint our tables so I am not sure what they use out back.

[@scottsargent2885]

What material was used for this project?

[@shopsabre]

Sign Foam

[@scottsargent2885]

@@shopsabre I’ve tried to find sign foam or (HDU) in Rochester NY area and it seems hard to come by. I can’t seem to purchase any around here. Any suggestions?

[@shopsabre]

@@scottsargent2885 Unfortunately we are based in Minnesota and I am not sure what stock levels are outside of the state. You could try calling Signfoam directly and they may be able to help. Or your local material distributer

[@plasmaman9592]

What brand foam is that?

[@shopsabre]

Signfoam