veilside fortune rx7 dyno tune 1

[@bachtuyen84]

NICE 7 . This is one of my favorite JDM with body kit. I am in love with the car.

[@288kingst]

This is an absolute japanese supercar I would pick this car over almost any lambo porsche ferrari or otherwise. Car makes me proud to be a kiwi awesome work.

[@xway]

11k includes the wing, cost of paint job will depend which body shop you go to , it could vary anywhere between 5-10k, rims + tyres can also vary depending what brand you decide to go with

[@xway]

@ANDRESGARZA1 the bodykit only is 1,152,000 yen = 14k USD , don't forget fitting and paint , wheels and tyres which will cost you about same as bodykit

[@worldhello1234]

torque 13 More than enough for you. The handling is more important, cuz a 20b conversion can compromise handling.

[@deadbrocks]

Oh damn dude you got me there. Very nice Fortune kit by the way.

[@edithlegacy]

perfect car, it's just beauty and power all together as one

[@sk8ergt12]

man that car is so perfect, props

[@EddieZ999]

Yo, Remember that I vid I took of your's (4 secs) - 50,000 views bro. She's a beauty. I knew I had few seconds to capture its beauty.

[@GuAp_JZ]

Clean and sick setup man. I was a little surprised when yoy said bread the bank on a 20b but your rocking a $15k wide body kit

[@xway]

@coolguy10060 thanks , i would say the boxter engine sounds really good but the 2jz would be a more reliable choice with greater potential, unfortunately putting in a 2jz would involve cutting into my bonnet which im not keen in doing heh

[@ps13boy]

Wow! This thing looks pretty intense! Sounds cool too. Good old Soichi on the tune aye ;) He did my car ages ago when ST Hi Tech was still in Newmarket...

[@xway]

thanks and i will do the road performance vid once the car has its final tune =)

[@xway]

@brodeur722 yep, will use the funds to chuck in a 20b and new paint job for the 7 in the near future, but was sad to see my 350z going up and down town and new driver showing it off as if he did all the work to it >.

[@xway]

@48bart97 lol cheers , did you make the lego world star wars base in your uploads? if so mad props to you bud

[@xExRxIxCxKx]

@xway yeah around here the good TT Z's are goin for about the same. well thanks for ur input on all this stuff

[@paul1320]

Dude you have the sickest ride I have ever seen! How much did it cost you total? Did you do the work yourself?

[@DRIFT4TIRES]

IN love with your fd3s, awesome veilside fortune kit, beautiful car! any chance more info on that red S15 that was supercharged and turbocharged? that seems dyno vid worthy to me. also is this all in japan? i need to move there for cars like this ;)

[@bamaboy2711]

I love your car dude. I'm not normally a Japanese tuner sort of person, just alittle but man I envy you. By the way could you tell me exactly how do you spot whether a car is supercharged or turbo charged by looking at it's engine bay? Please do reply man, I'm really curious to know

[@dylan4972]

Wonder if this car is still around Auckland?

[@xway]

@xExRxIxCxKx you can push the rotary hard all day as long as its tuned right, but from personal experience and friends around me with rotaries the majority of them wont me it pass 100k without a rebuild, i scraped the 20b as it was out of my budget at that time

[@brodeur722]

@xway Whoah thanks for the helpful insight. In that case I'll definitely go for the EVO or Sti. The only problem then is choosing between them. I like the 04 sti for the extra 10+ hp it has on the evo; however, the EVO will always have it beat in the handling department. Should probably just upgrade an EVO a little bit :P

[@xway]

thanks for the positive feedback =)

[@mrlim1]

I need to move to New Zealand if they have shops like that!

[@coryperemsky]

Talk about a dream garage!

[@xway]

@DudeWithaPage GTR had just finished its tune before mine went in, owner was picking it up shortly heh

[@skvakagud]

Very nice idd. :P Made me love ur car even more ^^

[@xway]

@xExRxIxCxKx i have a 350z but never owned a 300zx and im not sure how much they are in the states as i live in new zealand, but the price for them in NZ are about 6-7k USD 1989-1991 model

[@Engelados]

beautifullest thing i've ever seen *_* and niiice coulours (an niiiiiiice garage/workshop)

[@xway]

@xExRxIxCxKx heh i wouldn't take it the wrong way as i agree the original rx7 looks nice , this is my 3rd rx7 ive owned over the past 10 or so years so, ive already been there and done that with the original look, i bought this 7 for the sole purpose to put the kit on so it looks like a different car

[@xway]

@TheRotaryRules nice , i would suggest you put your standard 850cc secondary injectors into your primary , than get 1000cc as secondary , my car ran alot better with that set up. good luck with your build

[@mrsquishyboots]

at my old bosses shop we used the paint booth for painting, odd spot for a dyno..... super charged and turbo? nice group B influence

[@driftgeorge]

some people call it a car shop i call it heaven

[@xway]

@brodeur722 yep sold that off last month as it was drinking too much gas for a daily driver heh, now im driving around in a 1L toyota yaris =D

[@azzwhupin]

such a nice car ! still got it ? i want more vids ! (:

[@Maghau6]

114 Loves this car, and know all the work behind it. 1 tryed the samething as this dude, and he failed!

[@rotarydriftdreams]

i love the car dude great paint choice im really curious and i bet other people are i wish he would had filmed that but how the hell do u get a jack under the kit lol

[@xway]

heh the 20b is still in my garage , maybe i will get around to it sometime in the future

[@dublardemesrie]

that rx7 looks great and 540 hp its more than enough for a car as lite as the rx7 but why dont u drive it every day? a car like that must be shown to the world not hide away in a garage nice work man

[@ADR3NOX]

Thanks 4 Checkin out my vid... So I did likewise, and loved it! Nice car dude, I can't wait till I have money like this, til then college *sigh* lol

[@athineana]

Wait a sec...so you have a full veilside fortune kit and couldn't afford parts for a 20B? The whole build for a decent 20B can be done for possibly the same cost as that body kit. I know X-treme rotories based in austrailia has a really nice Billet E-Shaft for around 4k, and a 20B thick intermediate somewhere around the same price. Coupled with another housing, another rotor, some longer studs, coupled with the parts you already have in those boxes, I believe you could have had your 20B.

[@hobbawobba]

Oh crap, cant believe I havnt seen this yet haha. Mean vid bro, where was it taken? I think that GT-R had a little blurb in NZPC Magazine.

[@ANDRESGARZA1]

@Carguy751 I was investigating, and found that the RX-7 cost $6500 USD, plus the cost so you tell me of the fortune body kit, then it is something cheap $14000 USD, well thanks for telling me the cost

[@DOG3POD]

@randomdutch1 them veilside fortune kits are like 10k dude.i can only imagine wat the rest cost.

[@brodeur722]

@xway Ouch.... Same thing happened in my little town with a type R integra. I'm saving for an RX-7 man. Of course if somehow I manage to scrape up some extra cash I hope to get an 04-05 sti or EVO VIII or IX.

[@bnmutlaq]

congrats on your new engine... 500hp is great ... how do you find the new twin plat clutch is it suitable for daily driving... or is it similar to the single one?

[@MistRVertexZ]

this is paradise this is were im going when i turn 18

[@xway]

@EdvardoKrieg doesnt matter which model bud

[@xway]

@nicknsk8er lol no way, only the 7 is mine, the rest of the cars are from other customers that go to the same tuning workshop

[@yuruan5857]

That where old St-hitec at wow!! That is OG assss

[@xway]

that GTR has all HKS bolt on parts, it just came off the dyno before my 7 went in and was 700+ hp =)

[@xway]

@brodeur722 rx7 is a nice looking car but to be honest the rotary engine can cause alot of headaches, at the end of the day you may need to end up scraping the extra cash for a engine rebuild on the 7 while it could have gone into buying a sti or evo , make sure you visit rx7club(.) com before purchasing a 7 , a wealth of info there, take care and good luck with the future project

[@xway]

thanks =) this is actually in auckland new zealand , we have way more nissans than in australia =)

[@xway]

@MrSkaterookie its in New Zealand buddy =)

[@lukewar123]

my dream garage !

[@brodeur722]

@xway Oh i know, dude. But I once saw a comment where you said you owned a 350z as well.

[@Parag0n]

@xway fair enough everyone has different tastes, i have a T88-34D on my FD and a large extend port motor, sure with some E85 and boost turned up i will be making 700~rwhp as its making 450rwhp right now just with pump fuel. I really like your FD, the kit and everything is very cool, but ever since they featured the Veilside FD in Fast and Furious tokyo drift I haven't like it, bad publicity imo lol. Either way mate you have a stunning looking 7 with enough power to put away most cars :)

[@xway]

heh thanks for the feedback =) i am planning to 4 rotor it in the near future

[@cam615615]

@xway hey i was wonderin where you even buy these engines from? Is it online or do you have a shop somewhere near you that you can get them from

[@xway]

heh thanks =) u own a rotary corvette? corvetettes looks really nice

[@RedFTW89]

@MrTNL3 I said fun, didn't say anything about being controllable. Was voicing my own opinion. Wasn't talking crap and I did compliment the car too.

[@xway]

funny you ask that , i changed back to a heavy duty single clucth that is suitable for up to 600 hp cause the twin plate clutch was very unsuitable for daily driving =(

[@DutchBarbarianOfficial]

love what you guys did to the car. but, what did all of this cost actually? (including the 15k body kit and rims and stuff)

[@xExRxIxCxKx]

@xway oh i see, that's cool then. can i ask u something? i hear that rotaries are a pain and u said that as well, do u push them to the limit or would they blow on me if i just drove one like a DD not too fast? and why didn't you get the 20b? too much money or u just dropped the idea? i like rotaries cuz i can avoid people talking shit about 'four bangers' lol

[@brodeur722]

Yo man what do you do for a living? Your car(s) are amazing, dude!

[@YeahUSuk]

you live my dream man please tell me how you started.

[@xway]

heh thanks =) , you can see the full body build up on my other vid , take care man

[@ItsTooEarly5]

Hey, amazing car! But I am curious. Where did you find a 13 b brand new?

[@rickwang2000]

hi dude, saw my car in your video..very very nice rx7 you got there. any plan on putting it on track? i just started, great fun in puke.

[@Wolfsfang77]

nice, how much did this innitial setup cost u?....would b some good info. as i'm about to begin my RX7 project and i'm not sure if I'll go for the 13b or not...it might be just as affective as the 20b...so a little advice will go a long way thx

[@jamess6401]

Do you live in New Zealand? I saw the NZ plates on the Nissan GT-R

[@AznBoiiBTW]

DAM NICE CAR!! wish i had that lol. how much did all this (including the rx-7) cost you?. you must've put like at least a year or two worth of work on this.

[@alex199273]

i love this color better than the tokyo drift it looks nicer one it !!!!!!!!!!:) and you guys are rich

[@BrickMoosie]

@xway where did you get your bodykit? I've been looking for a Veilside RX-7 bodykit but they all the ones i've found cost more than the actual car...

[@xway]

@andyfailss some random guy who was on the dyno before me, r35's are too nice!

[@xway]

@brodeur722 lol only the rx7 is mine, all the other vehicles are from other customers =)

[@xway]

@edithlegacy heh thanks much appreciated

[@xway]

heya , i started when i was 20 i guess, opened up an internet gaming cafe at the right time, started with 8 pcs than expanded to about 60 pcs , sold the business after that , my old man used the money in couple down payments for mortgagee sale houses and sold those for a profit , hope that helps heh

[@aznbmxer182]

magnificent man love it

[@xway]

@TheRiseagainstfan thought about a 2jz but after speaking to the guys from 2jzswap . com they advised i needed a different bonnet which would involve me cutting into it to fit my fortune kit headlights, so i dropped that idea too, but yes a 2jz would have been nice and reliable with great power potential =)

[@brodeur722]

@xway That's cool man. It's a little funny that you sold the z because of gas prices... But you do what you gotta do to keep the thing you love I guess.

[@timruddell125]

u should be gettin awards at 4 and rotary! NZPC interview yet??

[@soul111smasher]

Fuck thats a beautiful car. What was the fortune kit worth all said and done, including installation? I can't believe they didnt have any s15's there either, pretty rare car i guess

[@philprx7]

i buy this kit ,and the cost total is around 45 000$ canadien and more includ shiping,the car mags,tires and the body shop.i stay in south montréal.

[@Weasd]

@xway sin chao, how did you start off to get all this money for ur projects? lame question but i have been moving weight for about 3-4 years and wondering how u get cash. also, where are you from? sincerely, fellow man of asian descent.

[@KingOfZilla]

tell me, do the rims and tires come with the body kit? If not then added togeather how much (for you) did they cost? I'm thinking about getting the kit.

[@Wendrym]

Paradise...............................

[@imTHEoriginalPB]

@xway i have two questions 1.how long did it take to make the rx7? 2.how much did u pay in total if u dont mind me asking

[@supramz2]

how many silvias do are there in auckland?

[@FullburnMech]

@Xeroes N what year Rx-7 is this? I heard the fortune works for 93-95.

[@monkeyboy308]

haha so many silvia s15s in one shop :P lol never seen so many silvias back where i'm from :P

[@kurtgalan79]

What brand is the paint you used? would give me some suggestions please, thanks

[@Xbumba]

OMG, I love that car

[@JimmyChoo24]

Hey can you tell me what rims you got there ? I really like them !

[@xway]

@tt01dwifta st hi tech next to silvia park

[@hatamakoto]

congrat new motor though, you make lot of people jealous. Show some performance on road some times.

[@DudeWithaPage]

why did you park that gtr outside???? i know you have space issues but damn!

[@coolguy10060]

if I had a rx7 I kiced out the rotary engine and put the 4 cylinder boxter engine of impreza in it because of the reliebilty of the rotary engine and really really nice car but how much for the body kit

[@P00RKN00W]

The gap between the headlight and the hood on the right side is much bigger than the one on the left side o_O If you're paying over 10K for a kit I'd expect for it to be perfect

[@Onlyphams]

how much was the whole thing including the car and the new motor