VMAC project starting up, just an overview of the parts for welding up the 80% receiver
Пікірлер: 58
@openhueblue6661 Жыл бұрын
such a fun build
@alvarorios54746 ай бұрын
Friend, I would like to see more videos that teach how to make gun parts by hand in the place where I live, they are difficult to find.
@Subgunman11 ай бұрын
I remember seeing some of the M11-9 flats that were laser cut many years ago. They were fold and weld. Unfortunately the guy making them was visited by the Alphabet soup company and told him they did not qualify as 80% flats, maybe if he had left half of the holes out of the receiver it may have qualified. I like the side cocking uppers where the cocking handle does not reciprocate with every shot.
@matthewsorgio580610 ай бұрын
Idk how my FFL said it’s less then a 80 percent kit, becuZs you have to weld and still fab to make it into a firearm, but that’s what I heard,
@pH_Dav5 ай бұрын
Could this possibly hold if JB weld was used?
@typicalbamboozler6030 Жыл бұрын
i have a 45 kit im currently working on. trying to think if i wana attempt to make my own side plates or have a waterjet or cnc place make them. hope to see some updates so i can follow along!
@norincokid Жыл бұрын
I've got it tacked together right now, thats about it. Ran out of argon gas so need to grab a new tank before I go any further with it. Been busy with other stuff. I got these side plates on gunbroker IIRC
@camarocrazed541111 ай бұрын
2a3d had the side plates for 40doll-hairs
@user-bx8yr8ki4s2 ай бұрын
What is the proportions of this firearm frames?
@Nickleboy110 Жыл бұрын
Yo! What filler rod did you use? I'd like to parkerize my kit so I know stainless steel is out of the question
@norincokid Жыл бұрын
ER70S-2 I think....just plain old rod for mild steel. Not sure how it will parkerize, I haven't gotten that far yet. But I plan on parking this one.
@rs-nk8cf9 ай бұрын
Can you do a video on how you welded the plates together? There used to be a guy that sold a weld jig but he is gone. Would love to see how you did it.
@norincokid9 ай бұрын
It was pretty straightforward, I didnt use a jig. Just some clamps/shims where necessary and put the upper and the bracket in there to keep everything lined up and squared. There;s tabs on all the parts, they kindof click together.
@rs-nk8cf6 ай бұрын
Surprised you didn't have any warping or anything to deal with.
@videogameLover-fr5nf Жыл бұрын
Did you ever get to finishing this? I was thinking about starting one myself with my cheap MIG
@norincokid Жыл бұрын
Not finished yet, but getting there. Its about 75% done. Little more welding. Then probably an overview again, and comparison to MPA parts.
@J-manoo7 Жыл бұрын
He I seen it said ( side plate print included ) is it like a flash drive ?
@norincokid Жыл бұрын
Printed on paper, blueprint style with measurements.
@dannypeto87348 ай бұрын
Just a simple sheet metal design, u skip weld it let it cool fill in the skips, its the warpping got to watch out for, skip weld let cool ,repeat.
@jackkonnof41062 ай бұрын
Tig weld it so you can just fuse it together without bulking it up with a bead. Are kits available ?
@norincokid2 ай бұрын
Thats what I ended up doing for the seam, just fusing the pieces together, seems to be holding up fine. Yes, Velocity has kits available.
@Mcng234310 ай бұрын
Does the front bracket need to be welded in
@norincokid10 ай бұрын
There was a hole in the bracket where it rests on the lower frame, I just plug welded it there, when everything was lined properly
@Jayblicky10 ай бұрын
Did You Use Tapco or Sten Metal Mags
@norincokid10 ай бұрын
Surplus steel STEN mags
@matthewsorgio580610 ай бұрын
Was does that front bracket peice do? Mine doesn’t fit well without it
@norincokid10 ай бұрын
It reinforces the front of the lower/frame. Theres a bit of stress on that takedown pin while firing. It may or may need some fitting. Mine fit pretty snug in there, and I just plug welded it into the center section once I had the three plates fitted together.
@kevinpayne755710 ай бұрын
For the trigger gaurd do you push it all The way forward or do you push it back to mate up flat against the magelwell?
@norincokid10 ай бұрын
@@kevinpayne7557 When mine went together I did it tight up against the magazine well. There is a roughly 0.5mm gap where it looks like the trigger guard could have been slid forward away from the grip, but I welded it up with it up against the grip. As long as its lined up with its tab you're probably fine. Maybe just do a small tack weld and then fit the trigger parts, make sure it works before welding the rest.
@kevinpayne755710 ай бұрын
@norincokid Thank you for the info. I'm on weapons guild but for the life of me I can't find any parts assembly instructions. It seems like such a simple platform. Any insights?
@norincokid10 ай бұрын
@@kevinpayne7557 I'm on weaponsguild too, I'm surprised the info you need isn't there. But its not easy to search stuff on that site. What exactly do you need help with?
@isacespinosa18263 ай бұрын
You tig , MiG or flux weld it ?
@norincokid3 ай бұрын
Tig
@Kingofdiamond_Gaming Жыл бұрын
What type of welder did u use
@norincokid Жыл бұрын
Just tacked together with a cheap TIG welder at the moment to see how it all fits together.
@scottplagmann3411 Жыл бұрын
I like the tab system for the magwell, wish the trigger guard had the same
@norincokid Жыл бұрын
@@scottplagmann3411 The trigger guard has a similar notch, once you get it in there, its pretty hard to mess it is.
@scottplagmann3411 Жыл бұрын
@@norincokid excellent! Some areas have some give on the tolerances but that magwell is a bugger if it deviates
@UrMothersLoverr3 ай бұрын
would a vmac upper fit on a cobray lower?
@norincokid2 ай бұрын
I'm not sure. They are a little different in width I believe between the two manufacturers.
@Ryder200 Жыл бұрын
Do you happen to know if the lower is in spec to the original Mac 11s?
@norincokid Жыл бұрын
I don't believe they are. I think the width is slightly different, so internal parts might be a problem. I have an MPA which I believe is closer to Cobray spec, I can check if the parts are compatible.
@scottplagmann3411 Жыл бұрын
The 3 piece assembled lowers should be the same dimensions as a factory folded lower, some the squared bottom seems wider
@alexandrefelix187611 ай бұрын
Bom dia! Voce teria o pdf com as dimensoes e medidas do passo a passo que possa me mandar? Desde ja muito obrigado.
@norincokid11 ай бұрын
Las piezas venían con planos de papel
@Yosi-xv7sv3 ай бұрын
Hawe tou work wan Baye wane
@johndoe-ek6vl Жыл бұрын
I was thinking about building mine but by the time you buy all the parts and phosphate coating or decent paint it's cheaper to just buy the whole firearm
@goluyadav85838 ай бұрын
Did you get measurements iam also interested in building mine please share me please
@jayhensley40495 ай бұрын
Bad part is they're never in stock
@tirocerto7934 Жыл бұрын
Size, pdf
@jayhensley40495 ай бұрын
I don't see that they sell 80% kids anymore. All they sell is kits without side panels
@deathtoalltyrants1025 ай бұрын
There's other places that sell side plates [or] you can just make the side plates easily by searching the schematics (schematics are "protected" by 1A speech) on scribe and other locations and buying the metal at your local hardware store/metal shop. 🎉 😂
@backwoodlos2190 Жыл бұрын
I want to make one pls help
@user-ep1xl8cu8h8 ай бұрын
สงมาไทยได้ไหมทีละชิ้น
@johndoe-ek6vl Жыл бұрын
pff I'd just turn down the power on a little flux core inverter and go to town. Nothing a disc can't clean up. These guns aren't winning any beauty pageants anyway.