Venturi Water Pump Animation

A rugged, simple and lightweight air operated pump that requires no priming and is capable of moving approximately 15,000 litres of water per hour, with a cost that is low enough to enable all crews to have one as standard equipment, thereby reducing waiting time and the high cost of hiring conventional equipment.
Unlike conventional pumping machines, the ESSIG pump will not clog or seize up when faced with small stones, mud, slurry, sludge, etc and is ideal when fast and efficient removal of water is required.
In tests the ESSIG pump when used with a single tool compressor, pumped water to a height of 4 ½ metres and is currently in use with the gas, water and electricity authorities as well as nationally known contractors.

[@NOBOX7]

If you would like to discuss how to build an air nozzle that will outperform your current unit let no . I can reduce the air consumption of this device . It would be free information as friends , Perhaps we could discuss building you a proto type nozzle . and how to build a dual stage unit for cleaning wells and draining deep tanks . This would work well for sea gold mining equipment as well .

[@mccreeshgroundworksltd4803]

Hi I would to discuss how to build a air nozzle, what is the best way to contact you?

[@DirtyDickMurdoc]

I want to build one to pump out swimming pool. Get in touch please sir. If you’re still around, it was 4 years ago. Thanks

[@454firemanblaze]

Sick and Fucking tired of all the Wannabe Engineers claiming that venturi is a pump! Venturi is NOT a pump! This is an Air Eductor! A pump requires mechanical moving parts to be classified a pump! GO SLAP THE PERSON THAT GAVE YOU MISINFORMATION!!!!!

[@mrgreyman3358]

with a mullet or a salmon???

[@Jean-vz8co]

Système inventé par le français Giffard....IMPORTANT...: ce qui permet dans une chaudière de faire rentrer de l'eau en se servant de la vapeur de la même chaudière..... dans un bateau on se sert des gaz d"échappement pour faire rentrer l'eau de refroidissement du même moteur.... sorry I writte in french!!.. by

[@Peter_Riis_DK]

Why not put the air coupling at the top of the veturi pipe and lead the airpipe next to the venturi so it may fit in tighter spaces??? And you don't have to submerge the air hose in sludge.

[@samowen5170]

i’m not sure but would the pump lift as well….if the pipe was 20 feet high that’s a lot of suction need to bring the water up. But if the hose were closer to the base it would be forcing the water up rather than pulling it up

[@Peter_Riis_DK]

​@@samowen5170 I'm not suggesting moving the air pipe inlet and the pump isn't twenty feet high.

[@miloudlemlem1520]

named also ejector in technical fieled one of its advantage that there is not revolving parts and it can pumpes solid parts in the fluid

[@natarajsetty851]

Does it work in deep well 200_300 meters as our pumpset if drilled for 250 meters and the water level is in 200mts so by putting submersible pump the what will drain immediately and pumpset runs dry so instead of pumpset if I use this v pump there will be no harm to compressor if the water level is there water will be pumped if not air will be out let please let me know if it works or not

[@pritam144]

Why vdo is so fast? Give some time to users to read & understand the information 👍

[@djpannunzio7146]

Pritam Patil you can slow most video playback speed via tab in upper right corner 👍

[@woodworkerroyer8497]

Or just pause...

[@mac91077]

Jet pumps use the same principle, used to pump water from borewells.

[@w.yandianto]

How hight is the discharge head? How much pressure needed to lift water from ponds above aproximately 4-5 metrs hight.

[@marcamant7258]

Metric measures instead of this gloomy tune

[@aditya_it_is]

Why not use a ram pump?

[@bruce5891999]

How can I use this blowing mulch from a hopper? Thank you.

[@floraparaschiv4657]

principiul alipiri fluidelor coanda

[@timhofstetter5654]

That is TERRIBLE performance. Use a basic, simple surface pump with a foot valve instead. Then you can move a lot of water much faster with greater head... and you don't require a huge air compressor.

[@dimastarostin8514]

Yes, it's cheap and simple, BUT it's a very inefficient method. As soon as the discharge hose rises from the water, the productivity drops, the higher the rise, the worse the work. And if you also need to transport somewhere on the side, then the work is even worse! Understand, this works due to air bubbles that float in the water and create traction. But air bubbles don't work on the suction (in not water).

[@monkeysgonna5306]

Looks like an eductor. Same principles at least

[@عبدللهبنعبدلله-ن8و]

⚠️ God has said in the Quran: 🔴 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )} 📖Quran

[@DirtyDickMurdoc]

@@عبدللهبنعبدلله-ن8و take that bull crap somewhere else

[@1607rosie]

Nozzles like this are used in dredges although that pipe stuck in middle blocks larger items. That would be ok for sand.

[@АуУа-х5х]

Это воздух?

[@aguspriantoagusprianto8024]

Teori ini tidak akn berhasil ,karena udara lebih ringan dari pada air ,, kecuali ada kelep bolak balik.mungkin bisa

[@karkupau]

OH MAN I REMEMBER, THAT´S A VERY OLD BRAZILIAN WATHER PUMP. GOOD TIMES. RESEARCH TO BOMBA DAGUA MOTOR DE GELADEIRA. EXIST SINCE 1930-40 I BELIVE. I HOPE HAS HELP ANYONE.

[@rakeshhc7594]

It's suitable for borewell?

[@barkadista8743]

can this idea of venturi can extract water from 20meter deep well?

[@woodworkerroyer8497]

It really depends on the size of pipe and the air flow. The longer the pipe, the more lift. The bigger the diameter, the less drag. The more air, usually, the more lift... The issue, is this thing is designed to lift sludgey water (at least what they show) 4.5m or ~15ft, your talking about 4x that. I'm not sure if it would work, but you might look at a ram pump (but I think they need water to be falling, before the pump...).

[@ZsOtherBrother]

1) Use a venturi pump to drive a ram pump, trading water volume for height. 2) Build a bigger venturi pump : requires larger air volume AND higher pressure. 2) Use several venturi pumps to pump the water in stages : requires larger air volume. 3) A smaller pipe diameter means less water volume and weight to pump, but I suspect that due to limitations (both theoretical and practical) it may not solve your problems. Good luck

[@covidwarrior9971]

It works 72m - 100m with pipe 3/4 inch and electric Compressor 3/4 HP. But the water just 10 - 12 liter/minute.

[@pri4etnik]

Why venturi? Simple airlift.

[@johnboygunsling666]

So I use water to push more water , in total adding more water to the situation

[@つるつるピカピカ]

エアリフトなんて大昔から使ってるだろ？ 便利だけど制約多いから最近はあまり見掛けないなぁ…

[@sagidarabei2699]

Is it work by (pneumatic pumping system) ?

[@natarajsetty851]

Can we use this v pump for submersible 200 mts depth..?

[@ZsOtherBrother]

That's a very good question! My 1st thought when I've read your question was "why would you want to pump water from 200m deep?", assuming "submersible" means the entire pipe is in the water, (if you just wanted to pump water from a 200m well, you'd say so, right? and then the question would be much less interesting, and the answer much easier:)). If all you wanted was a well pump, see my reply to @Bar Kadista. Otherwise, keep reading... Disregarding the "why", I then thought "why not?". For "water in water" movement, all you need is to overcome friction and hydrodynamic resistance inside the pipe... and also get that mass of the water column inside the pipe to move at operating speed. Then I realized: the second (working) stage might never be reached!?! If I'm not mistaken, for a 60mm diameter pipe, a 200m column of sea water is ~565.5 litres, and weighs about 580kg, (fresh water is about 1kg:1litre, so 565.5kg). Add friction and turbulence, and you may never achieve any meaningful movement. I leave further calculations and experiments to you :) Good luck.

[@euvoce4644]

No Brasil usamos uma tubulaçao de 1 1/4 e ar comprimido . para um bom funcionamento é necessário que o ar comprimido esteja a 1/3 submerso em agua e com pressão relativo a ser definida. exe. num poço de 200 mt de profundidade a agua deve estar 130 mt mas o ar comprimido deve estar sendo ejetado a 200 mt. compressor direto sem tanque de ar de no minimo 30 psi

[@lacaver64]

este sistema tambien sirve para hacer una aspiradora

[@ScottEmmert1980]

I am digging that song!

[@happygirls8312]

so do I

[@NavinBetamax]

If you dig deep enough with Devotion.......you might get Diamonds...besides water, oil....buried Treasure......Lol...So keep diggingv and Liking the song(music track).........Lol again

[@кириллкирилл-ы3о]

would it work on steam ?

[@euvoce4644]

veja isso kzbin.info/www/bejne/jqjEkHiJebCed68

[@WhatDadIsUpTo]

A better methodology is to incorporate a full-bore dip tube using a reversed foot valve. Doing that is a much more efficient way to extract a large bollis of water, without suctioning sand and debris.

[@orfescuhoratiu]

Hi, my main objective is to suck up all the sand and debris from the well .

[@WhatDadIsUpTo]

@@orfescuhoratiu Oh.

[@peterweeds4682]

Venturi not involved at all.

[@johnreyflandez7688]

What animation software did you use??

[@andromakss_user63]

аэролифт эжектор

[@reginaldomartins4155]

Isto não é algo recente

[@andersonoliveira496]

Acho que dá para fazer uma ferramenta manual. Um cano de pvc, depois outro cano de PVC meio centímetro menor, com uma tampa conectada por um pequeno travessão, para abrir e fechar e um calço, rente a tampa, na parede de dentro do cano. Quando descer o cano de dentro do outro cano, como se fosse uma seringa, a tampa abre com o empurrão da água, e quando subir o cano, a tampa fecha fazendo o efeito de sucção de uma seringa, empurrando água para cima e puxando mais água.

[@devrimkaydu7134]

Which program name my brother

[@hishamkandael3433]

How to get it

[@NOBOX7]

Great work guys , i recommend you build a dual stage version to achieve performance not available by a single unit .

[@heiituaku]

Link, reference or sample please. Thanks

[@timozsehew7538]

A incercat cineva, functioneaza?

[@IOAN2ER]

Merită incercat!

[@borisoto]

Hello friends, where can I find this item for sale?, It's available for buy it online? Thanks

[@chandanjana6964]

Nice idea...

[@ronstotell648]

amazing👍

[@theuse0003]

how to get air? supose if we don't have electricity

[@trevorcole460]

theuse0003 The principle should work with water coming in, constricting in the Venturi pressure chamber, hence causing a suction from the well which in turn should pull the water up. This would make This work without electricity.

[@Peter_Riis_DK]

How to start an engine running an air compressor, theuse? 😜

[@unarandom316]

Bien clarito

[@clintonbarbee3072]

Cool however it does prime. It just does it with air instead of water.

[@ememgarcia]

where can i find your product in the philippines ?? please reply ASAP

[@philfire76]

Hello Kenneth Thank you for your enquiry, please email:- [e-mail]

[@natarajsetty851]

@@philfire76 does it work for submersible pumps depth 200mts?