Ventuz Tutorial | How to do simple Projector Blending and Warping in Ventuz?

[@kml8556]

Awesome. Crystal Clean Instruction/Solution for Overlapping Part.

[@guillaumemuteba]

Best tutorial. Great teacher!

[@TrentPowell-zk6bs]

We are trying to find someone to help us with a current project. We are trying to combine 12 projectors to display one large image. We are currently using Datapath FX4 devices to support this need. We need assistance to edge blend the 12 projectors to create one clean image. We’ve heard there is softwares that can help but don’t have any experience in this arena. The projectors we are using are the Viewsonic LS550wh. Do you have any experience by chance or know of someone who may be able to help? We would be happy to pay you of course. Thank you so much!

[@VentuzTechnology]

Hi there 👋 Thanks for your comment. It would be great if you could send an email to [e-mail], our team will then connect you with the right expert. Have a great week!

[@_felipeferraz]

After the config is done, the PC will recognize the 2 projectors as 1? If i use a program such as Microsoft Power Point or other that uses presentation mode, the image will be showed in the two projectors? I am making a two projectors screen in my church, and we use a program called EasyWorship. I need this program to recognize the two screens as one, for showing the image that we want in the wide screen.

[@afonsoluchiari587]

no this configuration is only for ventuz enviorment

[@houlaperes]

Espectacular !!!!!!. aqui mustras como hacer un blending con un sofware ventuz, pero puedes explicar como se colocan los proyectores? a que distancia entre ellos y con que inclinacion? existen diferentes montajes de proyector bien sea en techo o en superficie? y algo importante. aqui muestras como hacer un blending entre dos proyectores horizontales, pero. Como se hace un blending entre dos proyectores para aumentar la potencia luminica o lumens? gracias y perdon por no escribir en ingles

[@VentuzTechnology]

Gracias por tu comentario. Respecto a tus preguntas, Ventuz incluye herramientas para hacer el blending de los proyectores, pero el proceso de colocación y alineación de los mismos depende mucho de cada proyecto y de las características físicas de la instalación. Respecto a los montajes de techo y superficie, hay muchos modelos, y dependen mucho del proyector que decidas utilizar, con lo que te recomiendo que te pongas en contacto con tu proveedor de proyectores. Respeto a hacer un blending de dos proyectores para aumentar su potencia lumínica, el proceso es similar pero solapando las dos proyecciones en el Layout, y ajustando posibles aberraciones con los warps de rejilla descritos en el vídeo. De nuevo, gracias por escribirnos, y, como verás, escribir en español no es un problema.

[@houlaperes]

que Fuerte!!! me parece espectacular. ademas con un perfecto Español., me alegra mucho que hayais contestado e invito a otros usuarios / tecnicos/ aprendices de esta tecnica qu visiten vuestros video tutoriales para saber mas. Por cierto, me puedes reedirigir a algun video tutorial vuestro mas que me pueda ayudar a conocer mas esta tecnica? muchas gracias de antemano.

[@choklaz2414]

In this video you worked in your laptop with two projector, but my computer only supports two display and i have two projectors should i work on one of them ?

[@VentuzTechnology]

Hey there. I don't think we used a laptop for this, I think we used a full featured show machine with a graphic card that offers four or six display outputs. To find out all about our Warping and Soft Edge toolkit, go to the Ventuz User Manual at www.ventuz.com/support/help/latest/WarpingSoftEdgingMasking.html.

[@khris1977]

You can buy Zettaguard USB 2.0 to VGA / DVI / HDMI Multi Display Adapter / Video Graphics Adapter (www.amazon.com/Zettaguard-Graphics-Multiple-1920x1080-10095/dp/B0182MIZTK/ref=sr_1_8?ie=UTF8&qid=1545046946&sr=8-8&keywords=usb+2.0+vga+adapter)

[@riciorozzey1739]

is this software on for blending multiple projectors ? or can I use it for single projector warping? and what kind of high end projector are this compatible with ?

[@VentuzTechnology]

You can use as many projectors or other output and display hardware as you like. Any vendor, any technology, Ventuz doesn't mind.

[@aichachnakri7159]

0

[@owin385]

how are you able to output changes to another computer? Is it running the same config client?

[@VentuzTechnology]

+owin385 We are running these machines as a cluster. If you want to learn how to set up a machine cluster in Ventuz, please refer to these two tutorials: Ventuz Tutorial 14 - Configuration Editor: kzbin.info/www/bejne/qnybp6CjgatkjKs Ventuz Director Tutorial 07 - Remotely Control Machines: kzbin.info/www/bejne/i6aVgY2apdSNocU If you have any further questions, please visit the Ventuz Forum at forum.ventuz.com.

[@benjiminus04]

Does this work with curved screens?

[@VentuzTechnology]

You can play out Ventuz on any kind of display. Any format, any shape, any technology.

[@2011Savere]

So you are using a program to accomplish this?

[@VentuzTechnology]

Yes, our program, the Ventuz software suite. Real-time content production and playout tool for AV and broadcast market. More at www.ventuz.com.

[@2011Savere]

Can this work with the NEC P502WL projector?

[@VentuzTechnology]

Works with any projector. Or LED wall or multiscreen setup or whatnot.

[@vokshirg]

What is price for this software? Anybody knows free software for edge blending? Thanks

[@VentuzTechnology]

Hi there. To get our official price list, please send an email to sales(at)ventuz.com.

[@petrinaentertainmentandsinger]

Is this OS X compatible

[@VentuzTechnology]

Hi there! Unfortunately not. Ventuz runs only on Windows. There are workarounds that have been done by our clients, but they are rather complicated and are not officially supported by us. If you want to find out more, I encourage you to post your question in our forum at forum.ventuz.com.

[@banimadim]

hi, so can you find any app or software to make blend on OSX?

[@andrzeyable]

Webcam calibration = automatic calibration ;)