Vermeer Chipper BC1230A Fuel Delivery issue

Vermeer Chipper BC1230A not delivering fuel to injectors - could not find much information about this injection pump about this specific injection pump, so it took some trial and error...
Thought I ran it out of fuel because it was on a steep hill, and due to that thought it sucked debri into the two filters. Checked fuel lines for cracks and tears. Had to replace fuel line from tank to filter 1. Cleaned the filter bowl, and then changed the second filter red one shown. Cracked injectors and still could not get fuel to prime while cranking. Installed electronic fuel pump to assist fuel priming. Bled the whole fuel system starting from first filter all the way to injection pump. Only was getting a slight drip out of each line. Tried running diesel 911 because temps have been below freezing. Still no luck.
Pulled the fuel shut off solenoid out, took the plunger out, reinstalled, and instantly got fuel going to the injectors. Ordered a new solenoid online 7167-620D, installed and fixed the issue.

[@fumagoo1986]

im having a fuel issue with my 1230 looks like a similar system. i think im going to try a electronic fuel pump, my hand primer broke

[@EastEndRiderzz]

Be sure to check fuel shut off solenoid.

[@ankarmucumucu3488]

I have a problem with mine that discharges a lot and I changed the battery, starter and alternator and it's still the same. Any recommendation.

[@EastEndRiderzz]

Discharge a lot as in pulling power when not in use and killing your battery?

[@eduardolopez4185]

do you have the part number for that solemoid?

[@EastEndRiderzz]

7167-620D

[@eduardolopez4185]

@@EastEndRiderzz thanks man👊🏽