Vertigo Nitro Review

[@ArenitasTrial]

Thanks for yout TIPS in my channel I have more about Vertigo! Greats from Toledo (Spain)

[@ArbutusWVI]

The throttle body has a brass air bypass adjustment screw that can be used for tick over adjustment. Using it does not put the TPS out of calibration,. It works the same as the Monty FI adjuster, CCW (turn out) to raise engine speed. I have found on my 2023 250 it has a lesser effective range than on my Montesa. I set it to 1400 rpm, up from 1200 as delivered, I have yet to foul a single BPMR6A plug while burning Canadian Chevron 94 Non Ethanol.

[@kevinworth6647]

Good evening, love the video as I own a 250 JBR myself, do you know where I could obtain some half dome plugs to protect my frame as in your review? Cheers Kev

[@jbstrials]

Hi Kev The JBR is a fantastic looking bike & I love my 225cc bike. These are the one’s I got for my frame,25mm ones & they just tap in with a rubber mallet. Hope this helps cheers www.ebay.co.uk/itm/155004263407?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7mzay4pntzc&sssrc=2349624&ssuid=skbxnNDDSn2&var=455170188344&widget_ver=artemis&media=COPY

[@kevinworth6647]

Thank you you’re a star 👍

[@jbstrials]

@@kevinworth6647 no problem Kev 👍 enjoy the JBR

[@YilgarnRallye]

the air filter O ring is fine no issues on my 2022 125 JBR, 60hrs on the bike now, I run the 4 plug,

[@avjdesign]

Great mods John what's the plug code again and also the name of the bleed thingy on the airbox?

[@jbstrials]

I don’t have the plug code to hand but it has a 6standard I put in a 4. I am going to put a scott oiler adapter in the air box with a short length of pipe going into front of bash plate

[@segwaymaui593]

from where did you get the rugged graphics for your bike?

[@jbstrials]

They are direct from vertigo as it’s a genuine JBR graphics kit

[@mikejames4271]

What's a number 4 spark plug?

[@jbstrials]

Standard is a 6 but I run a 4 that allows it to run a bit hotter to burn off the fuel as it was running a tad rich. My running issue went away so it must of helped

[@YilgarnRallye]

where did you get the carbon clutch cover protector from ?

[@jbstrials]

facebook.com/RTWORKSPARTS I got it from here