very few people know, the secret of the welder cuts round pipe 90 degrees in three directions

[@Wh1terider]

This is why you pay a tradesman. Not for the time involved, but for his knowledge and skill. Bravo sir.

[@m.haslam8495]

Absolutely correct. That's what people pay me for. It's the decades of experience and doing the job properly first time.

[@lowellmccormick6991]

When we build pipe handrails, we miter the horizontal corners and make the cut shown for the vertical posts at the corners. I tend to either draw the templates with AutoCAD or use an old piece of DOS software to draw the templates and import the result into AutoCAD and print them out for the shop. I love seeing this layout work done manually, without computers. It's very informative. Great job Stick.

[@vancouverpoy]

yea a miter saw was the first thing I thought about cuz it locks on 45 degrees. I fabricated and welded 6 fire extinguisher stands. I took on a job welding boats after having jobs 5 different jobs last year. Learning Marine fabrication welding has made me smarter!

[@tonyHern865]

Fuck computers (me watching the video on a computer)

[@michaelhubble6252]

What is the dos software can it be found somewhere?

[@lowellmccormick6991]

@@michaelhubble6252 I believe it is called flatpipe.exe and it's written in QBASIC. It's on an old 486-33 machine that's in the garage. I haven't used it since I found a routine called pipe.lsp. that runs in AutoCAD. I have that routine on my current workstation but haven't used it in a while. I've used some online template makers in the past. Both of the fab shops I draw for use coping/notching machines for smaller pipe. Templates are only needed for large pipe sizes.

[@michaelhubble6252]

@lowell mccormick thanks. I did a little search myself and found ... Dan Hopper's TUBEFIT Program Which sounds like it does a similar thing. Haven't tried it yet

[@daveparsons6956]

Very cool. Let’s not ignore the skill with the angle grinder. You made that look a lot easier than I think it is in practice. Great work.

[@billmoore1936]

@@daveparsons6956 is only practice Bill

[@SuperHornet1981]

It is quite enjoyable to watch someone work who really knows what they’re doing.

[@rickwilliams967]

😂😂😂

[@geraldwelch3487]

I'm a carpenter, with an interest in welding. I'm super grateful for these sorts of instruction videos. You're giving me the confidence to learn something I've always been interested in. Keep up the cool instructions!

[@irondiver292]

Going to start ratting the welding too huh?

[@francis5944]

Nice. If your a carpenter, you shouldn't have no issues on learning how to weld

[@elected0nes741]

In a basic sense, a welder is just a carpenter who builds things with metal instead of wood. If you're serious about becoming a welder, and you haven't done so already, I'd suggest you look for a tech school in your area that teaches stick, MIG, and TIG welding. I'd learn them all, starting out with stick and then MIG. After learning how to weld, get your certification in both plate and pipe welding and start making the big bucks at a nice fab shop. Good thing for you that you already have fabrication experience as a carpenter, so you'll have little trouble fitting in at a nice fabrication shop if that's where you wanna work. I've been a welder for many years now, so I speak from experience. Good luck in what ever you decide to do! 👍👍

[@СавиновМаксим-р1ф]

Как же просто то:).Именно о таком и говорят,:"Всё гениальное просто".Спасибо за подробную инструкцию.Обязательно буду использовать этот метод.

[@davidalanjonesridge9874]

Google Translator: Savinov Maxim Savinov Maxim 1 day ago How simple it is :). This is exactly what they say: "Everything ingenious is simple." Thanks for the detailed instructions. I will definitely use this method.

[@6y4men]

Нифига себе просто)))

[@HarryLevinson]

I'm not a welder but that is very cool. I love seeing techniques like this.

[@vince2997]

Man, welding is such a interesting job skill. When I was active duty air force, the fabricators/welders were your best friend in maintenance. These guys could make a part you needed for generators instead of us having to wait 4-5 weeks for parts on back order. Find something your good at and master it 😊

[@HAMlLTON]

3E3

[@Ziffel3]

Glad you said generators, and not planes… haha

[@vince2997]

@@Ziffel3 lol never. Sounds like a DSV haha

[@ToonMics]

@@Ziffel3 have to read it again haha

[@rogerroth9536]

I'm a retired music teacher. When I see something like this I naturally ask myself how this was first learned. Who first figured all this out, drawing patterns then applying them to the pipe? I can't even fathom the compound miter cuts. I am deeply, deeply impressed with your skill. Bravo!!

[@richards1342]

I like to imagine Pythagoras going to blacksmiths and blowing their minds 🤯

[@CosmicSeeker69]

left brain (logic) Right brain (creativity) It's no wonder it doesn't resonate with you of all ppl

[@rogerroth9536]

Playing in a professional orchestra requires unbelievable mathematical, split-second precision on the part of every one of the 100 players, in their individual execution and together, in ensemble. I don't know which side of the brain that involves but it's a learned skill and is a function of time. In a split second, the execution is gone forever, and there's no chance to fix errors. @@CosmicSeeker69

[@davidmurphy9151]

Like equal temperment - the enlightenment was good no matter what the youtube commenters think.

[@ToonMics]

u teach Music that is already awesome!

[@WarPigstheHun]

I know how to do this because 2 years ago I was obsessed with creating the perfect Tri-cornercut with quarter radius 2020 aluminium extrusions. The manufacturer (Mitsumi) outright refused to do the cut because it was so complex and required alot of time and precision. I definitely wasted alot more extrusions than I needed to. But hey, at least I learned how to cut tricorner quarter radius perfectly! :D

[@googlewolly]

Interesting. Also, just for your information, it's "a lot."

[@Madsy9]

10% of the time, it works every time

[@larryclemens1850]

​@@Madsy9 😜😂 Good line. I'm going to use it. Thanks

[@chrisS19019]

Good evening! I tried googling what you mean by tri corner cut with quarter radius and I’m genuinely stuck. Is that for the end of a counter top? Or is that the joint of a wall and floor? Brand new “home” (duplex) owner im interested in learning new things.

[@WarPigstheHun]

@@chrisS19019 it's actually for a customized PC "case" that allows me to carry a full midatx or a microatx desktop in a plane carry on bag. There's virtually no case on the market that can do this. I wish I could show you a picture of it, it's pretty cool!

[@abolishthesun4215]

I have never seen someone put so much effort into not using a pipe wrap in my life. I'm actually impressed by it.

[@KenFullman]

And don't forget to use gloves when you're handling paper. That stuff is dangerous.

[@Bush-Master4333]

The person who developed had to how to make the joint the old school basic fundamental as shown in video. If for whatever reason the pipe wrap is lost stolen or damaged this guy can save the day especially on fast paced jobs.

[@paddywiggle]

Once he has the template, it’s not very hard to replicate

[@HarmonRAB-hp4nk]

you'd be more impressed with the fact every pipe welder knows this way... proper faster way is just drill a hole in the pipe.

[@WrappedInPlasticine]

You got a nice, hearty chortle out of me with this comment😂😂😂

[@goraton52]

Прекрасный урок начертательной геометрии! Браво, мастер!!!

[@TheMikemcc55]

I work in concrete repair and foundation waterproofing. The fact that you clearly take the time to read all the comments and time pride in your work shows your attention to detail and dedication to your craft. Liked, subscribed, good on you bud. Keep up the hard work, we see it!

[@deereed82]

I am a wood machinist and supervisor of a hardwood sawmill. I second your comment. Attention to detail and as you also said, there's a lot of pride in his work too

[@giorgiomureddu4026]

❤

[@Chriscam2you]

No matter which way you look at this, love it, hate it, criticize or applaud it, claim all the other better ways of doing it, … you have to admit it is one impressive bit of work. I enjoyed watching the process.

[@水田立二]

0:29 0:29

[@mikalrage7316]

This is such a huge set of lessons in life. 1: Math + Art + Experience + Skill Mastery = Awesome results in any venture you choose in life. 2: Stay in school, kids! 3: If you personally don’t yet have one or more of those ingredients for success, it’s OK to form teams! Connect and team up with those who have the success ingredients you need to complete the formula. You bring your pieces of the equation and they bring theirs… everyone wins. 4: Everyone must win. One of my best business mentors hammered into me the mantra “Win-win or no deal.” Always work for the mutual success of your team and the client. This video and channel might just be one of the team “members” you need on your own journey.

[@Сева-к3п]

There is the Plate'n'Sheet Proffessional 4 program, in which you can print a template for any pipe diameter, at any angle of the junction of two or three parts of the pipe, and after printing at a scale of 1:1, just like the author in the video, you can wrap the pipe and stick the template with tape, circle the curved edge with a marker, cut pipes along this line and join. The match with the desired angle will be 100%.

[@lunarwolf5555]

People are allowed to use the help of a computer, but they must be able to do their job the old-fashioned way. Just in case.😏

[@chrisstaten3732]

Piping and commercial piping. None of my coworkers bring laptops and printers to work with them either. So…… not sure what field you sir have been in but glad that you’ve had it that good.

[@chrisstaten3732]

Some of my reply was cut off

[@chrisstaten3732]

I have 17 years experience with marine, industrial and commercial piping

[@chrisstaten3732]

@@engmecfleck refineries, ethan cracker plants, plastic plants, power plants, fertilizer plants, There are computers and printers on site but only for use of supervisors and upper management. To be fair though it’s not a regular thing to need said templates very often.

[@user-py8gn6mz7j]

Сууупппееер. Молодец, столько лет занимаюсь кузовными и сварочными делами, но всё ровно даже посмотрев ролик не смог запомнить, как сделать этот шаблон. А результат просто на 5

[@sakesaurus]

наверное там нужно чето самому посчитать чтоб такой шаблон создать, такие штуки на глаза не запоминаются

[@yatutpoteryalsya]

kzbin.info/www/bejne/mYinloCmjKqHZ5I

[@АлександрЛисицын-р8б]

@@sakesaurus Да нет. Будьте чутка повнимательней. Единственный размер который вам нужен это диаметр трубы.

[@sakesaurus]

@@АлександрЛисицын-р8б но... все эти построения которые он делал на бумаге - это как бы тоже расчет. Только в геометрическом виде

[@АлександрЛисицын-р8б]

@@sakesaurus Ну геометрия понятно присутствует. Но для повтора данного шаблона хватит и просмотра видео.)

[@gaetanramos7903]

Hi! THis is very impressive. I'm a high school math teacher and this is such a nicely done trigonometry application that I think about giving it to my students. I love when raw industry meets raw math!

[@KD_cycling]

Great idea. As a tradesman that struggled with more advanced math in highschool I wish my teachers used more real world examples/problems. I think it would have held my attention better. Otherwise it's just a sea of letters and numbers swirling around in my brain

[@SouthShorePlasticSurgery]

This is Descriptive Geometry. This is basic for Master Machinists. Descriptive Geometry forms one of the cornerstones of turning flat-plane 2D sheet metal into 3D shapes. This is the outcome of outsourcing everything out of this country - #1 there are no more Master Machinists left. #2 no one knows the fundamentals such as Descriptive Geometry.

[@КамалСулейманов-ш3у]

Этот парень заслуживает уважение.Спасибо что делитесь своими знаниями.

[@valeriusinteresniy7111]

На начертательной геометрии на 1 курсе все это учили и многое другое, но разве все запомнишь. За такие ролики респект!

[@СергейХващевский-ъ8г]

Вот и вспомни начерталку учитьс

[@alexeyorlov9639]

Я только ноги учительниц помню

[@Viktor2205]

@@alexeyorlov9639 Так вы фетишист значит?!

[@alexeyorlov9639]

@@Viktor2205 конечно. А что ?

[@cykHAcyk]

Всё верно 👍

[@soyitiel]

I've never used any of those tools or done any related work, and who knows if I ever will, but this was amazing and very educational to watch, makes want the opportunity to use this knowledge to come soon

[@jaredpatterson1701]

Well said

[@sickwilly1171]

Google sheetmetal pattern layout if this kind of stuff interests you. Those old timers that had to scratch out all of there layout without cad were badass.

[@thisguy6197]

Once I'm done perfecting my trade in HVAC I tend to get into welding and will most definitely be watching your videos countless times. Thanks for sharing your knowledge good sir

[@StephenZ827]

well know this....a shipyard ( carriers ) they will pay you while you are in welding school. You actually learn how to really weld vs these folks. Don't tack as they do here, in a corner, you can't get the grinder in there if you need to reset the work. Plus welds need to be tapered each end allowing for your compete weld to feed into that tack or flow over it. Stuck in a corner like this one, hard to clean it and now weld over it. Use a square to insure you didn't pull the tube left or right....keep checking that as you work.

[@ToonMics]

@@StephenZ827 whats ur job?

[@StephenZ827]

@@ToonMics kzbin.info/www/bejne/gYXRqqlmmqxkeac

[@StephenZ827]

@@ToonMics .....I'm actually in this video...parking lot of all places.........11 seconds or so....they are setting the Island house. It was a Sunday, which is typical for what we call super. But you have a number of dignitaries come in for the lift. Give a speech or so...Capt.s will go to welding school for a bit, learn to pay a bead...( not perfect )....and make the first weld, attaching the Island to the ship. It's cut out later as it's not a quality weld etc...he's not certified and all that crap....Top left, you see a black truck pull in, another truck approach it. That was me, took wife down to see the lift, she had never seen a carrier. Security picked me up on the cameras. I didn't park correctly....so they knew and came over to investigate...they saw my sticker, stopped and chatted, made sure all was kosher...This was my last carrier...keel up, making me a plank owner...kzbin.info/www/bejne/gYXRqqlmmqxkeac

[@StephenZ827]

@@ToonMics Sheet Metal...department....

[@BudgetInnovation1]

Geometry meets fabrication - great tutorial thanks!!

[@Ivan-fm3mh]

Превосходно.Благодарю за науку!Ваш подход к делу вызывает уважение.

[@alanpowell24]

VERY clever and surprisingly accurate!

[@pauleohl]

What we did not see is how much trimming was done between the cuts and the fit up we did see. Think of the 3 views. The top view will be a circle whose diameter is smaller than the miter formed by the 2 horizontal pieces. What has been made is fine for welding up 3 mutually perpendicular pipes.

[@paulorben6830]

I had to do something like that for brass pipe store fixture. I mitered each end then sanded the radiuses with an sanding drum the same diameter as the pipe. Worked. Your presentation was awesome. Old school stuff is lost on people today. I filed this one away for later. Very cool.

[@rwelderby]

Nice to see how to make the template for this. I figured this cut out about 30 years ago while doing a lot 6" pipe rail. I was fortunate enough to have medium size band saw and I would cut the end at a 45 then rotate the pipe without moving it in or out and cut another 45 degree miter. Thank you for your video!

[@chicobicalho5621]

Of all the impressive skills shown, I bet what most people were blown away by here was the angle grinder virtuosity. Damn!

[@AthSamaras]

Congratulations for teaching the correct technique to those who are interested..!! / Συγχαρητήρια που διδάσκεις την σωστή τεχνική σε όσους ενδιαφέρονται..!!

[@skeptik_realist]

Восхитительно! Отличная работа мастера!

[@ХочбарАбдулбеков]

Да, это по хлеще, чем Фауст Гетте....

[@ХочбарАбдулбеков]

@@Gadkiy-ya-79 по-любому результат хороший...

[@WarPigstheHun]

I understand you because Google translate!!!

[@РождённыйвСССР-ю6л]

Все четенько.

[@veysher3756]

@@WarPigstheHun it’s amazing how seamlessly we can communicate with people who speak other languages these days.

[@blogakiasbloger1726]

Congratulations to the Stick Welder on an impressive job! Your hard work and dedication to your craft are evident in the finished product. The seamless seams and precise cuts are a true testament to your skill and mastery of welding. Your attention to detail and commitment to quality make you a valuable asset in your field. Keep up the fantastic work, and know that your efforts are truly appreciated. Well done!

[@holybob4048]

lmao

[@TomSaw_de]

🙏 Amen 😵‍💫

[@randyhartwell974]

Tac welding sure is difficult.

[@sasquatchrosefarts]

You don't put all the welds together. You weld the first two on a forty five. Than the third has two forty five degrees drill holes. And it overlaps the first two for strength. It's faster to cut,.and much much much much stronger.

[@staninjapan07]

@@sasquatchrosefarts Hi. Any chance of a link to a sketch of that description? I want to 'see' what you mean. Thanks.

[@b4ph0m3tdk9]

That freehand cutting was the most impressive.

[@Grizzlox]

And this is why geometry skills are applicable to the STEM field. That aside, I must say your angle grinder skills are excellent. The steady hand and clean cut shows you've done a lot of this.

[@wilhelmbusching5876]

😊

[@1funkyflyguy]

Your precision work is very admirable. Respect.

[@billgeorge7804]

This was extremely cleverly done! I remember fifty years ago as a student apprentice I was given the task of making permanent sleeve marking out jigs for just this type of job. Good days.

[@Palmstreet-u7x]

i was born in South Africa,,and am a qualified sheet and metalworker, worked 40 years in the gold mines, in short, was a boilermaker and pipe work is my forte,

[@alfredfabulous3640]

@@Palmstreet-u7x where do you work these days?

[@djakon39]

@@Palmstreet-u7x I have been working with scrap metal for 60 years. He started as an apprentice miller in Leningrad, Hero of the USSR. Hello colleague from Russia 👋

[@ramiltimur9516]

Смотрю и поражаюсь.Очень грамотно.Спасибо,хоть мне это вряд-ли пригодится.

[@JoeyIndolos]

Great technique for a home shop with just an angle grinder for cutting. But if you have access to a professional shop (or have a more advanced home shop) that has a band saw, the easier technique would be to make two 45° cuts at 90° offsets (i.e., the cuts are 45° to the length of the pipe, and after making the first cut, rotate the pipe 90° to make the second cut).

[@mediamannaman]

Very smart! I would have never thought of that. Also impressed by how well he cut those curves in the pipes. Looked like he was just using a grinder, cutting freehand. Very skillful!

[@jackflash5659]

I am now one of the very few. I'm not a welder but I found this intriguing. Much respect to your trade gloved one.

[@roberteriksson1629]

Nice!! Well done Sir! It would be nice if you showed how to align your template to the next corner so the sides will be parallel.

[@homayounshirazi9550]

A very good approximation of how to mark curves on conic objects. I like your effort, not to mention your skill at using your cutting tool. The cutting part is something else altogether.

[@charlescamen5225]

Yes, indeed, technically not an exact process for marking out the intersection of solids, but it appears that it a a good approximation that is well within tolerance for the welding of the joint. A Very good and easy to replicate process that leaves it up to your cutting skills. Well worth trying.

[@xenocide1307]

@@charlescamen5225 The fit up was actually kind of bad, and given the lack of any real edge prep, you'd struggle to get full penetration through the root.

[@christianbarnay2499]

This is a special case (all tubes with the same diameter). The exact solution is that all intersections are straight planes. On each pair of tubes you just need to halve the angle between the tubes to get the angle at which you should cut each tube. Here 90° angles everywhere means 45° straight cuts on all tubes. It takes half the time to directly mark the cuts on the tubes than all that fiddling with paper. This method is actually useful when tubes have different diameter. But not here.

[@ToonMics]

@@christianbarnay2499 can u do better?

[@christianbarnay2499]

@@ToonMics The comment you're replying to already explains it all. There's nothing to add.

[@tameezdevos8868]

Wow . Your Angle grinding skills are unbelievable

[@donnawilliams3375]

I worker as a journeyman field construction boilermaker for 7 years. And then I worker in a weld and fabrication shop for the Department of Army for 35 years. I always used to say that I might not of known the trade. But I knew the tricks of the trade. But this one trick that I hadn't been able to do. I applaud the person that did this. It shows what a true craftsman.

[@DK.03]

Вот, что надо показывать на уроках черчения и геометрии в школе. Безумно интересные практические знания 👍🏻👍🏻👍🏻

[@cykHAcyk]

Если только в старших классах,а так всё это в начертательной геометрии в техникумах и институтах преподают

[@DK.03]

@@cykHAcyk , я к тому, что демонстрация подобных штук ещё в школе вызовет интерес у школьников и покажет наглядное применение тех знаний, которые преподаются в геометрии и тп.

[@yusupbechurkaev4007]

@@DK.03 да уж, лучше один раз показывать, чем сто раз рассказывать

[@Khinogtv]

White light on video still hurts my eyes 😢

[@xatasyugan2917]

кто учиться в техникумах и институтах они вряд ли потом слесарями и сварщиками идут работать.

[@PerzyYT]

Love how 90% of the video was him doing origami

[@ne7595]

😂

[@Na-if5ze]

Believe it or not, the majority of a lot of jobs is prep-work. Painting, carpentry (lay-out), welding, etc.

[@СергейМорозов-н4н]

Всю жизнь работаю с металлом и, оказывается, есть ещё чему поучиться у других. Очень профессионально и аккуратно, респект.

[@craigbenson7016]

Im not a welder or do anything with pipe, But this was a great video ! Thanks for Sharing and showing how to think out of the box !

[@danb6838]

heh heh heh......you said "pipe"...

[@Евгений-ч5н6ь]

Просто изумительно, никогда не думал , что такое возможно сделать. Раза три уже смотрю, но чтобы взяться за эту работу, не отважусь, ничего не понятно. Когда смотришь всё понятно, а самому начать делать, всё в сознании клинится, впадаешь в ступор и чешешь репу. Молодец мастер, жму крепко руку , ты настоящий спец в этом ювелирном деле.

[@mashkin7983]

Попробуй подойти к делу через день , через неделю. Это нормально просто мозг загружен посторонней информацией.

[@Victor-ko4]

Есть множество программ "Как выполнить развертку". Либо напечатать, либо от руки...Было бы желание и только) ...НО, судя по всему его попросту нет! =)

[@Victor-ko4]

@@mashkin7983 С таким подходом к "делу", лучше вообще не подходить))

[@Vlada_Taran]

Во всём нужна практика. Когда начнёте делать, мозг сам подскажет что к чему.

[@StonyRC]

Bravo, that's just magnificent. So fundamentally straightforward and the finished result is beautiful. Nicely done.

[@KenFullman]

I would have preferred a bit more detail about the measurements he was making. It has peeked my interest sufficiently to find a more detailed explanation, even though I'll never use such knowledge. Now I just have to know how it's done.

[@brianholtzmusicsound]

Im a composer by trade and I found the depiction of craft in this video to be exemplary of anyone who aspires to deliver superior work. Bravo!

[@Jasho-Beam]

I used to be a pipe fitter welder and can really appreciate your next level skills.

[@Stanley7746]

My father in law was a sheetmetal bench mechanic. He built my ducts, and they are nice.

[@Stanley7746]

@Lessko Brandon As a painter I learned how to match paint in the latter part of my career. Never could do yellows. I got to dump my mistakes! My boss thought I could match my whole career...lol

[@weekendhoppers]

Respect for local welders has increased a lot after watching this video, they don’t spend time on all these geometrical designs and straightaway come up with such tricky joins 😊👍

[@sickwilly1171]

Oh we use geometry and trigonometry all the time. Sheetmetal pattern layout, if you've never checked it out, Google it, fun stuff. First you get to figure it out, lay it out, the make it. Retiring in May, 39yrs Sheetmetal Worker. Been a fun career.

[@Лол-о4э]

Сварщик это художник как кисть ходит по полотну так и электрод ходит по стали!!! Великие люди

[@sandrarichardson2713]

Love watching your channel. It brings back my dad with a profession he loved. Thanks. Jesus bless.

[@palealien]

Holy crap, he nailed it. Amazing. I watched this four times and still don’t think I could ever come close.

[@LORDTREVORTON]

Maybe if he wasn’t a mute it would be easier to learn.

[@andrewmagro7703]

Absolutely Wunderbar - Excellence great to see someone teach the tricks what some try so hard to suppress hats off to you friend 🙂

[@exodust3114]

I’m not even an engineer. I’ve never welded in my life. How did I get here?

[@abraaopacheco375]

Parabéns pela demonstração e perfeição demonstrada com profissionalismo

[@RyanDonovan-kx3rn]

It never ceases to amaze me how much work this guy puts into making the simplest of jobs into the most complicated, useless waste of time. It's like he is trying to reinvent the wheel with everything he does...

[@EatinMonstersSince87]

5 minutes of my life I'm super happy I spent on this video. Anytime I see these rail corners, or similar I'll kno the amount of work that went into it. That's wild, amazing job fabricators.

[@stephenroldan5107]

Yep

[@berndmutze9469]

Sehr gute Arbeit! Die Erläuterungen genial dargestellt. Leider gibt es in Deutschland immer weniger derartige Handwerker

[@josemanueldomingos5968]

Comme de partout, je suppose ; - (

[@PescadoresdoInterior]

Vish, aí deu aulas em.. eu ia quebrar bastante a cabeça pra chega nesse resultado. Meus parabéns. Ganhou mais um inscrito guerreiro

[@davidalanjonesridge9874]

Google Translator: Inland fishermen Inland fishermen 1 day ago (edited) Vish, there in the classrooms... I was going to break my head a lot for this result. My congratulations. Ganhou mais um inscribed warrior

[@jasonparker3109]

This is why they’re called “Craftsmen”. I worked for awhile in a maintenance shop in a glass plant that had been in operation for over 100 years. The shop was still organized by “crafts”. There was one guy who was the tin knocker. He was pushing 40 years service. He was grumpy and hardly smiled, if ever. He would be assigned jobs to fabricate complicated guards and chutes. This was when he would come alive. The work he produced was pure Art.

[@freddyalbertomartinez]

Como decía mi abuelo, el que sabe, sabe! ...me gusta ver este tipo de videos porque son lecciones de vida..aunque yo no trabaje en herrería, pero me gusta ver la agilidad y la manera tan rápida de buscar los mejores ángulos y cortes para soldar los perfiles redondos y cuadrados...buen trabajo broder, te felicito...

[@tomscott1159]

Almost exactly 45 years ago I began my first job as a structural engineer. My new employer had an ancient IBM 360 and large plotter doing one main job: laying out large versions of pipe-joint-templates such as this for huge offshore structures. That darn old machine may still be doing the same work for all I know.

[@ling524]

你现在多少岁了

[@tomscott1159]

@@ling524 68

[@ПетрТепляков-ж8б]

Просто Отлично ! Вот ,что значить Мастер с Большой Буквы ! ! ! Удачи Вам и Успехов !

[@janetehovacker]

Que tesouro este ensinamento !!! Vai me ajudar demais com as uniões em bambu !!!! Gratidão !!!

[@davidalanjonesridge9874]

Google Translator: Janet Hovacker 5 hours ago What a treasure this teaching!!! Will you help me out with the joints in bamboo !!!! Thank you!!!

[@nikgghul]

Бамбук лучше сваривать третеми электродами))

[@janetehovacker]

@@nikgghul eu costumo parafusar as uniões de bambu gigante, e quanto mais perfeitas estiverem , melhor resultado. Não sei o que são os terceiros eletrodos

[@davidalanjonesridge9874]

@@nikgghul Google Translator: Bamboo is best welded with third electrodes)) Bamboo?

[@ruso6293]

@@janetehovacker É uma piada. Ele estava a brincar.

[@КотБлэк]

Зачёт!Настоящий слесарь - инструментальщик+сварной!🙌👍🤝

[@cw4608]

I am not a metal worker, but I find it fascinating to see how craftsmen do a job so expertly

[@kernalkorn1514]

Sensational results! I would have been reaching for the square stuff instead. I learned something cool today!

[@rudegor858]

Молодец! Просто и изящно! 🎉 Почему так мало лайков? Все зрители умеют так делать?

[@talgatturgunbayev6117]

Міне бас

[@rudegor858]

@@talgatturgunbayev6117 нет ссылки

[@peterewski]

I just watched this twice and still couldn’t do that. Great job. I love watching journeymen and pros at their jobs.

[@waynemartin5247]

Excellent, after watching this video I consider myself a KZbin expert. Next time I speak to the local welder I'll be sure to instruct him correctly.

[@toddprovencher7973]

I've never actually seen this done in the field, too time consuming. Very interesting though, and it looks awesome. You are no doubt a true craftsman.

[@mariojironbello307]

Sencillamente precioso. Con técnica todo es más fácil y Mejor.

[@waysotto1395]

Я делаю это проще , пилю трубу на пиле под углом 45* потом проворачиваю её по оси на 90* и опять пилю 45 * и так с каждой трубой проделываешь по два пила на каждую из трёх труб и все быстро и просто . Тоже самое можно проделать и с квадратной профильной трубой.

[@vse-prosto23]

Сомневаюсь что у тебя все ровно получится, 🥴✌️,

[@waysotto1395]

@@vse-prosto23 на стационарной пиле выставляешь угол и длину заготовки и вперёд , какие проблемы :)

[@vse-prosto23]

@@waysotto1395 проблем много будет, нужен упор продольная линия центров, я пробовал квадрат сделать с ножками форме табуретки, без приспособления никак, но выход нашёл)

[@Apocalypselord]

Вот это реально вариант, быстро и удобно, самое сложное, это как можно ближе к 90 градусам провернуть перед вторым пропилом. А с бумажкой как на видео, много не напилишь.

[@alexbrohovsky]

Окей, а если из инструментов есть только болгарка, маркер и лист А4?))

[@ItiscalledaMANDATE]

A properly sized holesaw in a drill press and clamped in place has always worked well for me.

[@goldfieldgary]

That's the best way IF you have the right size holesaw!

[@asolomoth1066]

I'm about to go to a tech school to learn welding, so glad I found this channel!

[@staninjapan07]

It is probably obvious from the following statement that I have not done this particular job before (though I have welded). Just as I was thinking "This is very long-winded, surely there is a more scientific or mathematical approach", you finished up with the drawing part and cut the shapes you needed. Then it fit together nicely. Great job!

[@jovanivalterfagundes9425]

Adoro trabalhar com , metais , pequenos reparos nas minhas máquinas,a vale lembrar , por robi . E essa dica e um show que Deus te abeçoe, por dividir seus conhecimentos. Top top

[@mane1571]

O importante é você ter o ferro na mão

[@jovanivalterfagundes9425]

@@mane1571 kkkk, verdade

[@marcelopose]

Está excelente el trabajo de la plantilla hecha a mano y el corte del caño con amoladora. Sin ingletadora y sin usar computadora e impresora. Éste es el mejor modo de aprender. Además, si se usara una soldadora MIG, quedaría muy prolija la terminación.

[@pauloinventostube7533]

Ótimo trabalho 👏 sucesso aí irmão 🤜🤛

[@russkyinarodnik6661]

👍👍👍

[@LabRat6619]

Wonderful to watch a real craftsman at work.

[@deanmorgan7011]

I'm a builder/ plasterer, loved watching this.

[@gidesp1]

Bon tutoriel. Merci beaucoup.

[@mariorodriguestomerodtigue862]

Simples e perfeito maravilha

[@pedroresolve]

Muito bom! Parabéns!🙌🙌🙌

[@fluchterschoen]

Oh my goodness this is awesome. For absolutely no practical reason I'm off to do this with some PVC pipe and pipe-welding solvent. I'm just thinking - you could use this method to create intricate tubular paper models or decorations. The contours can be cut flat with scissors, then rolled into tubes and joined. With some trial and error, you could figure out the best method for leaving tabs on the paper's joining edges to make joining and sticking the tubes together. I'm going to try it with paper instead!

[@ToonMics]

hahaha

[@Alotipsalo]

Hello, you are very smart. I like people who use their ingenuity to help others😊

[@mariomascaro2297]

Parabéns 👏 um trabalho perfeito 👏

[@ValdenorRSantos]

Obrigado por compartilhar seu conhecimento amigo.

[@Manchetedofutebol]

Tenho que dá um like,sensacional!

[@RustyShackleford_]

You can use a compass to remove all of the steps you did with the paper. Cool to know, but you're just adding extra steps to tracing the curvature onto the pipes.

[@alwayssearching1882]

I can weld but that is next level engineering. Love it.

[@Bluejay445]

🔻✔️ 0:06

[@wagnerwerneck3097]

Perfeito!!! Excelente dica.

[@tadeuszjakubowski6470]

Dziękuję za naukę

[@thorbjrnhellehaven5766]

Very impressive! The circle and straight line aren't actually the exact shape, but they are very appropriate, because they are easier and sufficient!

[@georgehaigh2276]

This is definitely a geometry teacher 😂! Love it! Thanks for sharing it.

[@vilmaestevesportella8528]

Isso é profissional, parabéns.

[@propovednik-monolita]

Можно ещё сюда добавить,что для того,чтоб найти длину окружности,не нужно оборачивать трубу в бумажку.Нужно внутренний диаметр умножить на 3.14 и прибавить толщину металла,умноженную на 2.