Very Rusty Oil Lamp Restoration [DIETZ D-LITE]

Rusty Oil Lamp DIETZ D-LITE No.90

[@a3a14613]

Now THAT is a proper clean & restore job, nicely done!

[@samtheman3071]

For me, these lanterns are works of art. Great job on the rest.

[@BrianCarnevaleB26]

buying a 1926 #2 for less than 40 bucks but it was painted in Very good condition. Have to find out if it takes away the value and how to clean the pain without ruining the finish. Very little rust.

[@grumpyken9151]

nice work! the glass repair was really impressive

[@catherinefurman7137]

Clear coat on the bare metal would have been nice, it is going to rust with it. Nice resto. I love the old lanterns.

[@patjohnson3100]

Very thorough job,especially dealing with the rust. There was alot of that. The finished project looks good. Looking forward to your future projects, including a good oil can, if that's what you decide. Best Regards from the USA.

[@MadisonKirkman]

During Operation the wick should not be above the burner cone with the slot in it. The wick should only ever be about the width of the wick in height above the wick tube. If black soot is coming off the flame, it is not being burned properly as black soot only occurs when the wick is being burned, and no the fuel itself. Nice Restoration by the way, the top chimney (the metal cylinder above the globe, not to be confused with the glass part called a chimney that goes on a lamp) is fixed into place by a special machine in the factory and is usually destroyed when you try to remove it. I will keep your process in mind if I ever work on a modern Dietz, the older Dietz chimneys are not spot welded and thus much harder to pull apart as you did.

[@AlexBRestoration]

Thank you for advice 🍺🍺.I have to removed the top chimney because it's was full of rust and I don't like to live rust behind the restoration and look good on the outside.

[@CallistoMarie]

Quelle magnifique restauration avec tant de minutie, je suis admirative de votre adresse et pourtant elle revenait de très loin cette lampe. J’ai la même que j’ai aussi remise en fonctionnement mais elle était bien moins rouillée et le verre intact. Bravo.👍

[@briansworkshop01]

Fantastic job looks great thanks for sharing your time and skill and stay safe. 🍺🍺👍👍👍👍😷

[@BrianCarnevaleB26]

Using that wheel brush takes away any value, that I do know. The old look must be preserved without any abrasive at all.

[@adinaburcica1259]

Its look amazing without paint,thanks for sharing🥰🥰🥰

[@lucialima781]

Perfeita restauração Lindo

[@AlexBRestoration]

🍺🍺

[@hoperestoration5595]

great work i like it dear keep it up

[@ainungendutz5697]

lampu teplok yang keren dan cakep

[@SimTechnics]

Lovely restoration process 🙏

[@user-dx6pt9oo6h]

Hi Alex B👋👋👋 awesome restoration lamp 👍👍👍🔥👌🏽✌🏻

[@AlexBRestoration]

Thank you

[@SIXGUNSAM]

Nice Work 👍🇺🇸

[@nortonics5745]

Nice. Inspiring. Thanks.

[@zirala1844]

Beautiful work 😌

[@wayneberry8703]

Great job 👏🏼

[@Restoration999]

good job !

[@davidweirauch849]

Thank you. Very helpful

[@hoperestoration5595]

great idea

[@brianbartulis9709]

Nice job Alex. I've a No.2 NY USA in large fonts and one of my fav's. As below said. I keep mine dialed down until heated up. Tad high flame I nary get soot. Heck, I gotta light up the porch for the kiddos on Halloween. ~ lol, even parents have mentioned how creepy effect over the decades.

[@AlexBRestoration]

🤣🤣🍺🍺

[@hermanhelfrich1747]

Nice job

[@QuantumPyrite_88.9]

Time to reply to comments.

[@jodido7804]

Excellent

[@adrianapicolo2318]

OMG👍

[@mihaiizina5400]

I'd buy that!

[@RandomTubePT]

Very very cool Bro... Stay Safe... Big Hug

[@AlexBRestoration]

Thank you🥰

[@sandirobinson6966]

That lamp is a fairly recent Hong Kong or China-made. It would have made sense to simply buy a new globe.

[@andrzej5142]

Perfect🤝👍

[@pavelperina7629]

Quite interesting, it makes me to think about manufacturing process, because today this kind of kerosene lamps is quite cheap and it seems to be made almost completely using zinc tin and some press. It made me to watch video how beer can is made, but it's area which is somewhat mysterious to me.

[@cookingonabudgetuk]

Nice. Very nice.

[@subramanianiyer2731]

Nice job.

[@AlexBRestoration]

🍺🍺

[@goldeneye006]

Just bought 3 of these to restore

[@vice.nor.virtue]

Final piece is amazing. I didn't know rusted metal could be restored to such pristine condition. Did you ever put a coat of paint on it?

[@QuantumPyrite_88.9]

I reckon you aren't going to get an answer.

[@LawlissLanterns]

If you were going to use the wire brushes on the grinder, why bother with the electrolysis tank? Not criticizing but curious. Socket as an anvil ? Brilliant! Nice smithing!

[@craigdavidson2278]

Just picked one up fir €15....basically gave ut a quick steam clean, poured out the old gunk, put in a new wick....Will try it after it has had a chance to soak.

[@miguelboricuapatientlongsu1855]

Nice

[@Rayo_Rob_No.17]

You really tear into these things! Good job on that D-Lite! Now, how long are you leaving it in the e-tank? Ive seen less rust when I’ve had some of my projects e-tanked. You do detailed work, amazing! Yet, why the black engine paint on the burner and globe plate? Personal taste? If you want to protect it from rust, I’d use a silver or chrome high temp paint, it’s much more reflective than black. You’re going to get more illumination from silver...just my observations. Keep it up!

[@kerryahlstrom352]

meticulous and wonderful restoration! Can you find parts to replace the oil tank? I have a Deitz that was converted to electric and want to bring it back to original.. Parts? Could you do it for me?

[@dianisinca3461]

Ese es el que tengo yo igualito azul

[@conniesherrill1058]

What was the oil lantern soaked in and how long

[@raoullevan6550]

Ouais, et la lumière fut. J'ai une lanterne du même genre, marque Dietz. Je vais essayer...... Merci

[@user-sv8fk3ff8u]

Goodvergood💚❤️🌹🌳👏👏

[@tilmanvincent7524]

Beautiful ! Do you every sell your restorations ?

[@AlexBRestoration]

Even my wife she ask me every time, but it's not for sale.

[@tilmanvincent7524]

After showing your work I don't think you would ever have a problem selling them. I do a little scroll sawing and after the work I would rather admire the piece than ever put a number on it. Again, beautiful lamp.

[@Albertf1r3096]

Hey, bray wyatt told me he needs it back-

[@jeffhinds5127]

If I sent you a picture of my lamp, could you tell me what I have?

[@RustyZipper]

No, just start googling the lettering on the lantern, spend an hour to do your own research

[@pauljohansson6245]

It's called a wick

[@sergiesnipe616]

i think you said steel wrong its spelled S.T.E.E.L not S.T.E.L.L..

[@RustyZipper]

Stihl, Steal

[@aidaelizabethpaul3973]

Check out my restoration video too : kzbin.info/www/bejne/hpm9o35sobZ3nas