Vespa GTS steering column problem (rattle in the steering column) How to repair DIY

Vespa GTS a strange knock from the steering column.
Vespa GTS steering column problem (rattle in the steering column) How to repair DIY step by step.
Полиране на слюда (How to polish Vespa wendscreen) • Полиране на мотоциклет...
Vespa gts 300 exhaust progect-1 • Vespa gts 300 exhaust ...
Ако имате проблем с вашата веспа може да се свържете с мен за съвет или помощ.
Instagram: svetoslavkovachev
email: [e-mail]
#vespa #vespagts #steering #modernvespa

[@claudiolordino2192]

Music doesn't add anything to the video.

[@matiasnruffa]

Hi. I'm having to do this every couple of weeks. Bike is still under warranty so I take to the official shop for it, but is frustrating that this happens so frequently. i was wondering if it's possible to put a lock washer in between the camps to prevent them getting loose.

[@fitness-fishing-s.kovachev]

With this diameter, it will be difficult to find a spring washer, but you can try Loctite glue for bolts by putting it on the thread.

[@user-bk4fo1xu5y]

We’re you pissed when filming 😂

[@fitness-fishing-s.kovachev]

you are wrong about something куре

[@respectiseverything4808]

Vespa GTS and LML cone set is same or what??sir

[@Murat1982turkey]

Hello, I am using 2013 model vespa gts 250. During a long journey in 2017, I started hearing a caterpillar-like noise from the front. This sound comes when traveling at a certain speed. I only hear it when driving at 70 90 km/h. While pushing my front wheel left and right, a gap caught my attention. So the wheel wobbles a little where it stops. Will this be fixed when the bearing on the front is replaced? At the same time, the handlebar vibrates when driving with one hand. Will all these problems be fixed if the bearing is changed? Soryy Google translate

[@fitness-fishing-s.kovachev]

Hi Murad, first try to tighten the bearing, as I showed in the video for Vespa GTS. There are two camps, one at the bottom and one at the top. If the noise does not improve after tightening, you must replace both bearings. I made a video showing how to change the bearings. Especially the lower bearing. It is harder to change. The video will be useful to you. Greetings! kzbin.info/www/bejne/j5i6dXarp5Zgfas

[@Murat1982turkey]

@@fitness-fishing-s.kovachev Thank you so much. I suspected it was the bearing. I traveled for 5 hours. At the 4th hour, the sound started. No one has been able to find that sound for 3 years. But there are 2 more problems with the engine. The first one is while driving the engine, the handlebars vibrate when I let go of my left hand. The other problem is that when the engine stalls I bend over and shake the front wheel. I see emptiness. Do you think there will be a bearing problem there too?

[@fitness-fishing-s.kovachev]

@@Murat1982turkey Hello, first tighten the bearing clearance, and the handlebars should rotate freely. And then try to see if the problem reappears. If it still exists, the bearings may need to be replaced. But before that, grease them and remove the play from the upper nut of the steering rod. Let us know if the problem has been resolved since then. Greetings!