Vespa GTS steering bearing replacement (change) How to replace Vespa GTS steering bearing: manual

Vespa GTS 300 Sports Luggage Rack: ali.ski/Xm_Pw
Vespa GTS Brake Levers: ali.ski/q_OuSY
Vespa GTS sticker set: ali.ski/aUBEz2
Vespa Storage Bag: ali.ski/dmSnYq
Vespa GTS Hook Crotchet : ali.ski/IQm8Ec
Motorcycle jack ali.ski/fqN8kd
How to replace Vespa GTS steering bearing: manual
Replacement of the lower bearing of the steering rod of Vespa GTS. (Lenkkopflager Wechsel Vespa GTS)
In the video I will show step by step how to change the bearings on the steering shaft.
I unscrew the mirrors.
To begin with, I dismantle the plastics on the headlight.
I'm dismantling the mileage cable.
Unscrew the three bolts on the front fender.
I unscrew the bolts on the front wheel and remove it.
I disconnect the brake hose from the brake caliper.
I unscrew the nuts on the steering rod and remove it.
I push the upper and lower steering bearing bracelets. I drive the new bearing bracelets.
In the opposite way, I reassemble everything.
The tools I use for disassembly are: hammer, chisel, mandrel for driving the bearing (key 32), motor jack, bearing grease, brake fluid dot 4, degreaser for brake discs, machine oil to lubricate the speedometer cable.
#vespa #gts #steering #bearing

[@curtgibson9872]

Stopping with just the front brake at slow speed causes a small jolt on the handlebars. I think the head bearings need to be tightened. I appreciate this video to explain the process. At 14,000 mile I doubt I need to replace the bearings.

[@fitness-fishing-s.kovachev]

My advice is to inspect the bearings and the bracelet they fit on for the sub points. Clean and re-grease the bearings and carefully tighten the nuts so that they are not too tight and make it difficult to turn the steering wheel. When tightening the upper nut, there is a tendency to tighten the lower one on the steering axle a little more, keep that in mind! Greetings and many kilometers with your Vespa GTS!

[@curtgibson9872]

@@fitness-fishing-s.kovachev Thank you

[@g.aryantoputra]

I’m working on mine currently. Which one is right for the lower bearing, mounting it upside down or the reverse? Bcs I saw you mounted it upside down In my case, I have change it earlier about 4-5 months ago, put the free side ball upside. But I already feels the bearing start to play. Did I place them wrong?

[@motorsk]

Good idea for changing Vespa steering bearings!

[@sergioc6119]

How often do you need to change those bearings?

[@fitness-fishing-s.kovachev]

If there is play in the steering wheel or vibration then Also with a front impact, the balls are marked in the bearing ring and must be replaced.

[@lalremruataralte217]

How much price vespa lx 125 fork bearing?

[@fitness-fishing-s.kovachev]

Around 15 euro

[@supartianatiana978]

Change only steering ball or all componennt

[@tayster55]

Sorry you have ball cage wrong way up @14 mins!!