Vespa LX - LED Switchback Turn Signal Kit Installation | Mitch's Scooter Stuff

[@MitchsScooterStuff]

Follow Mitch's Scooter Stuff: Instagram - bit.ly/ScooterIG Facebook - bit.ly/FBScooterStuff

[@steve2736]

Mitch have you tried WAGO connectors? They form a very tight connection with a lever lock, no crimping required and they easily disconnect if necessary.

[@docjody8624]

Hey Mitch, congratulations on your "100,000." Well deserved. Will this Switchback Kit work seamlessly for my 2004 Yamaha Vino 125 (YJ125S)? If not, can I just replace the stock turn-signal bulbs w/ LED bulbs? THANK YOU!

[@MitchsScooterStuff]

Thank you so much! Hmm your vino have orange lens, right? I would suggest to get blinker genie so you can have turn signal into running light when not using signal... I have that on all my scooters. Here's link amzn.to/3TMi82s

[@docjody8624]

@@MitchsScooterStuffMitch, you're a true genius, the Blinker Genie is exactly what I've been looking for. Yes, 2004 Vino 125 orange lenses. On those LED bulbs to replace my factory bulbs-- what LEDs do you like, if you have a link? Again thank you for taking time. You're amazing.

[@MarceloGebrael]

Thank you so much, I was looking for this mod, but also looking for the tail lights too. Make all three red and brake light and turn sign.

[@MitchsScooterStuff]

You're welcome!! More lights look better :)

[@moss8448]

I switched over to LED turns, brake and headlight on a GT200 and found I didn't really need to do anything else as the LED turns worked just fine as is, maybe a tad bit faster blinking, which is fine to me as it catches other drivers eyes better, plus it really eases the battery drain.

[@MitchsScooterStuff]

You can replace flasher for LED flasher to flash at normal rate :)

[@moss8448]

@@MitchsScooterStuffyeah I like the faster flashing gets their attention!!

[@ИванАвдеев-ъ7у]

подход к мелким деталям на высоком уровне❤

[@chrishall4727]

Hey Mitch thanks for all the great videos. I did this mod today and for some reason my turn signal will flash twice and then go back to the running lights. then a long pause and then it flashes twice again. it causes the same effect with the rear turn signal as well. any suggestions?

[@chrishall4727]

even stranger it only does this when the bike is running. when the key is on but the bike is off they work fine. Did I get something wrong?

[@chrishall4727]

Follow up for anyone who has run into this problem. The problem was with the rear LED turn signals. They had built in resistors, and it seemed to be causing trouble. I got some LEDS with no resistors for the rear and everything is working smoothly.

[@MitchsScooterStuff]

Just saw this... still have the problem or you got it fixed already?

[@fintonmainz7845]

Thanks a Million for this Mitch.

[@MitchsScooterStuff]

You're welcome 😄

[@Marco-Cina]

Hi ! Is it working also on a Vespa LX 125 2011? Thanks and you got a new subscriber, you're amazing!

[@MitchsScooterStuff]

Aloha! Yes it will work on your 2011 model 😎🤙🏼 welcome to my channel!

[@Marco-Cina]

@@MitchsScooterStuff Thanks! My model don't have the pending turn signals, only the ones in the front shield, is there any difference on cables linking? Thanks!

[@nth1576]

what happen if my vespa only has the turn signal without the DRL. Which wire I should connect for the DRL?

[@MitchsScooterStuff]

what year / model ? Does it have horn cover lamp? or parking light inside of headlight? To do this switchback, need to grab kit - I have link in description box

[@bruceeggers100]

Great stuff as always, thanks.

[@MitchsScooterStuff]

My pleasure!

[@trelaonline]

Would that work on a Vespa S50 2010?

[@MitchsScooterStuff]

Yes

[@atolfree]

Looks like those LED lights would work on my Piaggio Fly as well !

[@MitchsScooterStuff]

Yes they do, I have video of that kit on Fly on my channel too!

[@Gave77]

Good job, but it's not easy for a rookie 👍🏻

[@MitchsScooterStuff]

Thanks for the feedback

[@gersonmazariegos8208]

Those lights don't work, I installed and they don't work waste of money

[@MitchsScooterStuff]

Bummer, I installed three of them and works awesome