New LED Switchback Turn Signal Set for Vespa GTS

New LED Switchback Turn Signal Set for Vespa GTS
www.scooterwes...
www.scooterwes...
www.scooterwes...
PART# MI200-GTS-CLR
MI200-GTS-BLK
www.scooterwes...
www.scooterwes...
Tools needed:
#2 Philips
T25 Torx Driver
Small Flat bladed Screwdriver
Pliers
Knife
Electrical Tape

[@allens7476]

Superbly done video. Great explanation, good camerawork, great audio. No fluff. No excuses. KZbin wannabe's take note.

[@pjpace]

LOVE my turn signals - they look so great on my notte. Need the adapter (you say around 1:23 that the 2020s might not need the adapter... they do). The quick connect connector didn't work that well - I've had a lot better luck with other brands, like posi-twist (which takes up less space and makes a better connection so you can probably get away without using the extra electrical tape). A couple of install tips - I didn't remove the knee pad panel. I was able to watch the video and figure out how to pull the relay from the front left signal hole. I also didn't remove the horn cast and just used a grabby tool to pass the connector from the right to the left signal hole. A coat hanger would work too. That cut the front install time down considerably and didn't need to rip open that panel behind the knee pad. Thanks for all the videos you've done and do, Robot. Soooooo helpful. (And helpful for you getting my wallet open for stuff I wouldn't have ever thought about buying!!)

[@despurvoa3]

Phil Pace Hey Phil! Can you clarify what you mean by an adapter? I just bought the kit and want to install in my new 2020 GTS Notte. Thanks, in advance for clarifying for this newbie. 🙂

[@pjpace]

@@despurvoa3 There's a little adapter they include in the kit that lets you plug in the Euro lights to the US wiring. You'll need it. Nothing more to buy though.

[@despurvoa3]

Phil Pace Gotcha! Thanks! My conundrum was whether I leave in that flasher relay, but apparently so, since i guess the wires have some sort of capacitor? Resistor? on them. All I know is that little crimped won’t “bite through” insulation, so it’s time to be creative! The smoked lenses are nice though!

[@brassbandmission1643]

I was able to install these lights easily with the instructions from Robot's excellent video here!

[@oldcrow187]

and again, thank you Robot for this tutorial from me and my Notte.

[@MitchsScooterStuff]

Almost $200 wow... I did like $40 mods but this kit looks sweet :)

[@billytonmursal1764]

halo, thanks for the tutorial, i am installed SIP blinker in gts 150 2021 succesfully after watch this video, on 2021 gts the front blinker already plug n play no need to install the relay for led, but for the rear blinker its the same with this video thanks mate keep up the good work

[@c7uk]

I’ve had my eye on this kit for a few weeks over here in Europe for the GTS I need to replace my PX for commuting

[@cyclump]

My 2011 GTS has two yellow/black wires at the back. One is the brake and one the tail light. I chose the wrong yellow/black the first time. After a redo it worked.

[@kevinschwantes8128]

Just put mine in. Look Great, Much better visibility!!!

[@Jackmessana123]

Did you also change the bulb in your headlight?

[@kevinschwantes8128]

@@Jackmessana123 Yes much better. Mine is a GTV

[@Jackmessana123]

Kevin Schwantes I want to do the same. Was afraid If the color of the lights don’t match

[@deverenfogle3201]

Which bulb did you put in your headlight? I also have a GTV. Also, did you get the smoked kit of this, or the clear?

[@kevinschwantes8128]

@@deverenfogle3201 I just bought all the bulbs from scooter west

[@n2tattoos]

Rad how the running light s-l-o-w-l-y powers back on.

[@fotographixs]

Great Video.

[@TheCerealHobbyist]

Wish I had realized this was an option before ordering the un-returnable Euro drop-in replacements so I could get the running lights without drilling stuff. :-/

[@ever_since_ninety_three2390]

Hi Robot, quick question. For the new VESPA GTS HPE which are already in LED and day running light. Is the SIP kit than just plug and play except the rear light?

[@adriancaruana7333]

Hi Robot lovely video am i right in saying that you used clear ones for front and smoked for back? If u can advise pls

[@ChrisStynen]

Nice video, very nice lights! Is the seat that's on this scooter available to order?

[@theflyingbrompton4787]

Great video!

[@HinesFilm]

I just did the install and when I turn on the bike to test them I get a loud high pitch beep every second when a turn signal is engaged. It sounds like it’s coming from the relay. I have a 2022 GTS Racing Sixties. Please help!

[@hulkingwarmachine3]

I was told this was a simple plug and play for my 21’ super sport. Doesn’t seem to be

[@SuperMiguelAraujo]

Dear Robot, can we connect the tails lights to the stop lights? it seems for tail lights the beam is to high. thanks!

[@Edofiol69]

hello I have a vespa hpe 300 I'm mounting these arrows, on the rear arrows the positive cable where you need to attach is yellow and black?

[@ianhedges4608]

I’ve a 2007 GTS 250, this model doesn’t have a flasher unit so how would I install?

[@shadow199212]

Dears i just have changed the signal lights on my vespa but how can i make the day running light turn off when i turn on the flash signal? Can anyone help? Is it the relay that i should change?

[@35dd]

would this fit a vespa gts 250 2009? also wouldn the led projector headlight fit? thank you

[@donaldmettler2377]

Hello hey I am looking at buying 2021 wolf ex150 do u know where I buy parts for it like leds and so on thank u, also I know it's not a Vespa but is wolf scooters ok.

[@cvurbannyc1296]

Where can I buy the starter flash led light ?

[@ponchobelper6063]

hi, do you have something to chance the turn lights of the bv 350?

[@skullgaffer1]

Do they make these for 2012 piagio flys ??

[@billytonmursal1764]

Does the installation is the same with gts 2020?

[@tommybrazie8456]

what about at 2009 gts super ie??

[@35dd]

Do u know already ? Will it fit a gts 250 2009

[@naveenchichu]

Does led light available on vespa s,

[@rozaidirazali5044]

Does this work with the 2003 gt 200?

[@c7uk]

5:43 “...anti-theft device”?? 🤣

[@jimbobaggans1564]

Thieves never carry pocket knives. Lol

[@pardeepbanswal9727]

Kitt kha mele ge

[@shaunnoble783]

Followed this , all 4 indicators flash now :-( running lights ok , but all 4 indicators flash whether R or L switch used also no flashing indicator light on headset

[@motordad875]

shaun noble Same problem for me. Did you find a the solution? Thx

[@shaunnoble783]

@@motordad875 Yes but not the best , remove the bulb out the indicator warning light in the head set to stop the bleed over.

[@TheSonOfSammyTerry]

Running light do not work 2011 GTS Super. What a waste of money

[@cyclump]

Did you get the right yellow/black in the back? My 2011 GTS has two and I choose the wrong one the first time. It was the brake. Switched to the other and it worked.

[@pccoder]

There’s a lot of steps and dangling wires. I wish the integration were simpler and tighter. 😌