Installing Akrapovic Exhaust on Vespa Sprint/Primavera

[@RevItUpMumbai]

19:20 thank me later

[@Biggie045]

Rev It Up thanks bruh

[@CeritaFour]

You should stay from the start and enjoy those tantalising tatas!

[@skinnydudewithculturedtast5329]

Your subscriber 😁

[@aleksvelkov8244]

Thanks man

[@mr.unknown6141]

Thanks

[@forrysc]

I've just installed this exhaust on my 2021 Racing Sixties Sprint. This video helped immensely. The hardest part of the entire install is getting the two 10mm copper nuts started on the head studs. If I had Robot's dainty booger hooks instead of these these giant sausage fingers, I would have had a much easier time. BTW! I don't know what the power output is after the pipe install, but I can now easily cruise at 65 indicated. It's about 5mph better than it was prior to the pipe install. WORTH IT!

[@mjh5437]

"Booger Hooks" lol.

[@safarijonas3490]

"Giant sausage fingers" lol

[@cescilhamdimaria10]

Hi what's your pipe model number?

[@blacksquirrel4008]

Never thought I’d consider an aftermarket exhaust for my LX but that sounds really good.

[@ikariku]

but is $800....I think too expensive.

[@JDMz]

@@ikariku worth the money for good quality. Most aftermarket exhausts that are cheap don't last or snap.

[@ikariku]

@@JDMz I find one with a great discount in my dealership (U$500), but for my VXL needs to be adapted.

[@izoyt]

wow, i like that deep basy sound.

[@lenart1984]

The brand of the muffler is pronounced Akrapowitch! Leading brand among sport exhaust systems - made in Slovenia EU.

[@mattludecke8157]

Always nice for a mechanic to watch robot as I met him in petson already

[@basatrus]

Thank you Robot for all the details. Just got mine installed today. The best!

[@eddiesakamura5154]

I enjoy watching your quiet and professional handwork. 👍

[@jeffdofing6411]

Do NOT lose the baffle! The screw vibrated out & I lost mine, had to do a sketchy order from Greece; luckily it worked out. Used high-temp red thread lock on new one 2 b permanent. The original screw has a tack weld; once you remove it, the tack breaks and that safeguard is gone.

[@richiep3520]

Handy tip to get the sound u want is to drill small holes in the baffle to increase volume little by little. It is a slight mutilation to the baffle but only noticeable if you go in close. On my gilera runner st 200 it was too quiet, baffle out waaaay too loud so I drilled 3 1/2 cm diameter holes and it was perfect. Just upped the volume to my a level I was happy with. To repair if it is too loud is patch on the inside with a little sheet metal.

[@thomaskouzinas1150]

You are a legend mate. Great videos Robot. Keep up the good work guys.

[@SierraLimaSL]

love these videos!! please make more vids on exhausts!!

[@rubensdewit8661]

Does it fit on A Vespa Primavera 50??

[@zovechianganghaka1029]

Nice to be like this video great job 👏👏👏🙂🙂👍👍👍👌👌👌

[@EctoGamer]

The way he pronounces akrapovič, like bro there's a "č" for a reason it makes a "ch" sound like ch from "CH"ina

[@R3LaX43]

It have better sound than my GSX-S1000 :D

[@riskiawanrules]

love the exhaust

[@SHUKISTYLE]

nice to meet you. I have a Vespa Sprint 150tft Euro 5. Will the Euro 4 Akropovic be fitted to this vehicle?

[@LL-ty7wr]

Can you also get one for a piaggio liberty to put on ?

[@jangerz]

is it true that its better to upgrade first the variator kit before the exhaust for better performance, and just upgrading ur exhaust only wont make any difference

[@JohnDoe-ub8fq]

Does the Akropovic Exhaust, actually 'add' power to a GTS 300?

[@Flash-xs8rc]

no

[@wingedmonkeys548]

Yasuni is perfect song on my BV 350 more it is less expensive

[@williamsarpong1271]

hi i have 2017 GTS super 125 with ''IGET'' engine, the radiator out by the exhaust, my question is, will this fit

[@richoberdorfer5167]

Thanks for showing the baffle removal! Unrelated question: why do you prefer the Akrapovic to the Malossi pipe?

[@croeternal]

Rich Oberdorfer its one of the best on market malossi cant give a water to a akrapovic

[@fbi5737]

Wtf i dont use a exhaust for 700 dollar on a scooter wtff?😥

[@hathaway.1166]

FBI These scooters may not be popular in the US, but they are very popular in Europe and Asia,spending 700 bucks for an exhaust is nothing as we would spend more on aftermarket stuff than the scooter itself, please don’t judge people just because they spend big money on an “puny” scooter.

[@roberthardwell3916]

in my country, 700 dollars isn't anything when it comes to vespas. Mostly, they modified it fully from top to bottom and the total price is mostly 1000-3000 dollars and some even reach 15000 dollars. its crazy how much they've spent their money to modified vespas

[@josepeixoto3384]

@@roberthardwell3916 and they still end up with a pos slow scooter ; why not buy a *real* bike instead of following the herd, is beyond me....

[@tobiasbjorvik6005]

Alan Golden no

[@fintonmainz7845]

@@josepeixoto3384 The herd follower is yourself. I'm not surprised it's "beyond" you.

[@tango165]

Both sound really good!!!

[@rangerover1531]

hi robot whould it be beter for fuel consuption. thanks from london . keep it up really enjoy you videos

[@sabreder]

Thank u very much from Turkey. I watch your videos. You make it great, by the way do u have any chance to maintaince Yamaha xmax 250cc scooter?

[@bartdebuono]

I want one for my 2023 Vespa Primavera 150. Do you have these in stock? Is this a full exhaust or slip on?

[@juliusvalmeo]

hi! one question, does the original exhaust pipe is copper? mine needs to be soldered because the welding cracked. thanks

[@TT-mh4sm]

I tried to put on a larger diameter dB eater an stripped screw the under the carbon cab. Now I can’t remove it. Any tips?

[@gamberro0453]

Were did you buy the akrapovic? I want to buy also one for my vespa but i dont know what type of akrapovic it has to be.

[@juliodiaz4493]

Do you have to change your spark plug if you change your exhaust system

[@alifnaufal]

in my experience, changing sparkplug with no engine tuning doesn't do much better than the stock setup.

[@kiko5462]

I would like to buy for my primavera red. Ship here in Philippines

[@AdamRBusby]

thinking about it... would be cheaper if I lost 4+ pounds of sprung weight..

[@Budivedder]

Nice exhaust

[@arsecheese51]

Awesome video! Trying to drop the exhaust down pipe from a Piaggio MP3 500 Sport but cannot access the two nuts in the same way as this video, even trying to wiggle in from the side. It just doesn’t allow access like shown here. Does anyone have any experience of this and can tell me if I need to remove something to access these two nuts? Pleeeeeease!

[@revzy9698]

Is it needed to do P.a.d.s tuning after installing aftermarket exhaust?

[@pigeonboy7102]

Dose anyone know if this works/ fits on a Vespa et4 125?

[@gilerarunner4233]

There are difrents sizes but its a waste off money

[@marcusmcgrory1853]

Will u ecu adjust to the exhaust or do u need to add models

[@ОлегАрх-э4м]

Hello. On ET 4 150 there will be an 11-inch wheel back?

[@ptposeidon]

Do you need to remap after changing its muffler?

[@rulynsantiago1672]

Try to review vespa s 125 iget 2020,pls..

[@aligatorownsyou]

what size of muffler do you have to use on VESPA GTS Notte 2018 125cc?

[@erwintorres6924]

I Have a Piaggio typhoon 50 cc 4T. will this akra exhaust fit on it?

[@russelbing4637]

Ia there akrapovic exhaust for piaggio liberty? What model?

[@RebelClubhouse]

WIll this fit on a 2013 Vespa Sprint Sport 50cc?

[@johnnicholls7879]

Is it possible to put one on a Beverly 400 hpe thanks .

[@RooT2K20]

Did you try them on the dyno to see if the pipe makes any HP gains?

[@julianc6374]

If u wanted to go fast why would you buy a vespa lmao the fuck

[@richarddegen6184]

yes it makes about 10% with a malossi hiflo air filter and malossi multivar vatiator on mine

[@mishraashish2755]

I'm just gonna touch it!! Im not gonna lick it! Epic one 🤣🤣🤣🤣

[@Farie977]

Do you need a piggyback for it? I kept hearing rumors (from the local shop) that aftermarket exhausts would screw up the O2 sensor if you went with the stock ECU

[@DimasRaihan666]

apa jangan jangan konspirasi orang indo men biar kita beli piggyback 😂

[@Farie977]

@@DimasRaihan666 udah dites cuy, sejauh ini ada backfire tapi sensor aman-aman aja Masih pake ECU bawaan btw

[@DimasRaihan666]

@@Farie977 gue juga udah beberapa hari pakek knalpot racing ada nembak tapi sedikit ga signifikan. trus nanya ke forum forum malah di takut takutin lambda rusak, padahal kaga napa napa. paling next nambah open looper kalau dibutuhin.

[@judevincentfactura1883]

Guys can you translate in English. I'm having that same dilemma..thank you.

[@richarddegen6184]

you do not

[@yudhistira2957]

Do I need to install piggy back in my Vespa Sprint Iget when changing my standard exhaust with this Akra?

[@alifnaufal]

yes, you should.

[@DEARHICCuPS]

Thanks, Robot. 🤘

[@matth8567]

Nice video mate

[@fadlillahaffanfahreziemail8337]

maenin kirian aja om biar lebih kenceng

[@m4ttyofficialchannel]

The question is why?

[@stefanoterreni5863]

Vespa the best

[@alvarodeya]

Hi, I own a vespa s 150 from 2010 (2valve engine) is there any problem if I install these exhaust to my bike? Thanks

[@jesusmejia3910]

I have an 09 150 LX. I was wondering the same thing

[@omperatur]

GOOD JOB!

[@daanbreda7122]

U look very kind

[@marcs8991]

Does it hurt the engine ?

[@shannonmcleish31]

Good evening sir I am a 125cc tyger scooter bike but I want to install one of those muffler and my bike I am in Jamaica

[@damionanderson5887]

Today I install 1

[@budlistar5312]

So...do you have to pull that off to get the back tire off?

[@richarddegen6184]

just muffler and mounting bracket..leave header on

[@s0k1ng22]

it's called Akrapović and it's croatian Exhaust

[@mihabericic2328]

It's from slovenia...

[@u_w5822]

ShadowGames14 Slovenia not Croatia!

[@marbinchen1991]

S0K1nG i hate croatians. they always think they are the best

[@Der86Fra]

It’s from Czech Republic

[@mihacimerman3935]

No it's from Taiwan

[@tigredefeu28]

Is that a 50 CC ?

[@gintaraslingis6636]

Yes

[@richarddegen6184]

@@gintaraslingis6636 150

[@The_Slow_Z]

That kit is listed at $800, If so how expensive was the damm scooter? Where I’m from that’s 80% of the MSRP of brand new scooter lol. I could buy another whole scooter for the price of that exhaust

[@alextf2369]

are paiggio x9 125 gd just wanted to now im from england

[@dallasdandigitalproduction393]

I cant rationalize buying an $800 exhaust for my Tao Tao. Im not gonna race the Scooter MotoGp anytime soon lol

[@calladream]

can I fit 13 inch rims on a GT200 ?

[@VespaMotorsport]

We offer these 13" Yorban wheels (originally for Piaggio MP3) that will fit the front of your GT. You'll have to do some modification if you want it on the rear. You'll also need a lower profile tire like a 130/60/13 for the front. www.scooterwest.com/13-yourban-wheel-with-hub-cap-and-mounting-hardware-each.html You can see these in use on our "Vespa Everywhere" scooter: kzbin.info/www/bejne/aKvFgJ-QbtSGj5Y

[@oskarsensation]

hi boss i have cbf 150 moto and i want original akrepovic Do not disturb anyone want a nice sound. Is it possible ???????????

[@madisonscott4677]

Exhaut doesn't match retro design

[@user-ft3kd5je7b]

Is this can fit to scomadi tt125?

[@thelos8093]

How loud would it be with just the header without the muffler? would that be legal?

[@user-hv7cp7bp2i]

Carlos Quirindongo

[@richarddegen6184]

loud as hell!!!!!

[@josefosterini4957]

Should you up jet if replacing with slip on exhaust?

[@exeroo9728]

yes, don't have to but you get a nice liiitle hp gain in the entire rpm range

[@richarddegen6184]

this is for fuel injected sprints....no jets

[@johnzaidi4131]

where do i get those headers??

[@OneWayParley]

Lmfao guy in back @2:48

[@Labtec86]

I want a Vespa

[@adrianepland2210]

it look like you know this shit, do you think i can but a akrapovic or arrow exhaust on my SMC 50 Mistral?

[@ciromontagna7824]

Quello che non riesco a capire perché spiegano in inglese, e non in italiano

[@sonikachoudhary7561]

Can it fit on lml scooter

[@amineattalaoui9601]

this work for SAM 125??

[@PARTALIOS69]

👍👍👍👍👍👍👍

[@senalfrc6312]

nice!

[@ahmadmoreno6747]

what size the header ?

[@waynehall8633]

robot I weigh 300 lbs I have a 150 scooter it doesn't handle very well what should I do first shocks ?

[@waynehall8633]

I am 6'8" how much should I weigh

[@waynehall8633]

Below Zero. I'm 6'8" tall how much should I weigh?

[@tfraupach]

Damn, try riding something bigger...like a Harley.

[@Peter-rn5kl]

see if the shocks are adjustable, you can increase preload, or get some new shocks and ned forks / put a stronger spring in them (ik this is kinda late, but i hope it helps )

[@richarddegen6184]

go on a diet

[@jordylagodesigns2953]

does somebody know where the fuck I can get an akrapovic or another brand exhaust for a Vespa Sprint 50cc injection?

[@lipasneakerhead2224]

Does that fit a vespa sprint 150 notte?

[@VespaMotorsport]

This particular exhaust will fit Sprint/Primavera up to 2016, we also sell a version for the newer iGet motor. Thanks!

[@rashedalkhoori3269]

How? For me I can’t remove never

[@ollyberry8060]

Is the stoke exhaust restricted on the vespa sprint 50? Also, how does the malossi kits improve the performance?

[@user-ur8ox1om1w]

Is this a Vespa 50cc?

[@MrDjrmx]

can i install this to sym crox 125 ? if yes where i can buy this kit for acceptable price

[@antreasgamer4455]

All exhausts are the same size because I have SYM SCOOTER and I do not know if they will work on my own please help

[@FadeThePlayer]

Will these exhaust fit inside a Kymco Agility 50 City/Kymco Agility 16+?

[@najaciuser5445]

Hahagag no

[@didnthurt4077]

Does that akrapovic fit on a 50cc Vespa?? Id love to get that on my scooter :)

[@Bram-rh3fn]

Yes it will if it is a 4 stroke 2 valve or 4 valve it would fit only if you have a vespa primavera or sprint

[@panharothchh]

How much for this exhausted. ? It could shipping to international country ?

[@VespaMotorsport]

Please have a look at part# PMAK-04 on scooterwest.com. Yes, we can ship worldwide. Thanks!

[@panharothchh]

Thank you

[@nurashidnoormohamad5802]

Vespa Motorsport Hi Robot and the Gang. Is there any Re-Mapping require to the Vespa after installing the Akra?

[@croeternal]

Nurashid Noor Mohamad no

[@croeternal]

Panharoth Chhoeun they are expensive but in a good way.. you gst performance sound everything with it

[@f1lip797]

its pronunced akrapovich not akropovic

[@mjh5437]

Akrapovitch.

[@STIjojoSTI]

Can you install this pipe without tuning it?

[@VespaMotorsport]

Yes, this is a bolt on pipe. The scooter will automatically adapt to the new exhaust when you start it up. Of course there are aftermarket tuning options you can do to get more out of the pipe.

[@STIjojoSTI]

Vespa Motorsport Thats cool thanks!

[@gotyee5631]

vespa 50cc?

[@SkvalaGaming]

"The best solution is to remove the sensor"..? No shit Sherlock

[@farrasmuhammadraihan8678]

Sorry just wanna ask, what kind of hammer that use for remove the db killer on that akrapovic? Thankyou