Robot, the tire inflator works very well like you said. Even works well on my truck tires.

Hey Robot, thank you so much for your videos. I moved and now and far away from any dealer and servicing is a DIY project now.

Hi, hope you have a great weekend! - do you think a two-stroke Vepsa Sprint 50 cc is worth it to start with? found one for about 1700 euro... I could tune it to 83 cc and put some Winter tyres on I guess.. but not sure is worth it, is a two-stroke from 2015, and looks in great shape... what do. you think?

Intresting how many scooters get smashed tale light efter Your tip? 🤔

will this fit with GTS Super Sport 2024?

Great video. Thanks for sharing your knowledge on vintage scooters.

Congratulations on the videos are top.... 😊C I wanted to ask you about my Et4 50 2001, I have hot start problems, if I did not accelerate slightly to a minimum not part, what could it be? The carburetor I cleaned 2 times in ultrasonic washing, the sleeves are all intact, and then in the opening sudden gas first I have a small vacuum, then it accelerates. Help me! Thank you.

Hello, i have a Primavera 150 with the case; i just bought a 2023 300 GTS the rack does not fit, i already ordered it; but what i need to know is if the smaller case for the 150 will fit the rack for the 300, thanks in advance! I have looked everywhere and can’t find that info

Can you do a crank assembly video for a VBA / VBB casing using a puller tool and crank wedge please?

You have to give mad props to Robot. He has a full parts supply in his jacket. Robot is a legend!!

Just picked up a 3400 mile 80' P200E... pretty good shape. Had Vespas as a kid and one of the last 2 strokes Stella's a few years ago. Fun fun scooters. Already had several deliveries from you guys for this winter project... My rear brake is excellent.... front brake not so mach... 😎

Really could use a video of changing the whole wire harness :)

👍👍👍🇹🇷.

Is the rear wheel spinning normal when you turn it on at idle? Thanks

I think I need to check my original intake manifold on my 2003 ET4 150. Thanks for the video!

Hi, do you have this rack availiable rigth now for vesp LX125 2011?

I have a 1979 P200E. Way more fun to ride than modern Vespas. I just pour old gas out. I use gas as a parts cleaner, and also to clean oily greasy dirt off my hands and arms after working on a car or bike. One of the issues with those Vespa tanks is there is no way to get all the gas out. Even when all the usable gas is gone, there is still almost a 1/2" of gas left on the bottom of the tank. I store mine through most of the long HOT AZ summer. I like to get all the ethanol gas out, and put TruFuel in it. I have a suction pump that can get some of it out, but to get it all out, I take a bunch of small rags, put a rag on the end of a piece of wire, stick it down through the filler, and let the rag soak up the gas. You have to do it over and over again to get it all. I like that tail light. Mine just has the square style tail light. Would like to have one of those. I weigh 240, I run 32 psi in both tires. Those are modern tires. I use the vintage style tires on split rims mostly for the way they look. I wonder what the deal is with that orange silicone?

Now that is what a scooter should be. I have a 1979 P200E. Mine is blue. It is mostly stock, except for the engine. I had the engine rebuilt by a local vintage Vespa shop using a lot of high dollar aftermarket parts. It was not built for performance, it was built for reliability. Mine didn't come with any tools or manuals. I completely disassembled it and replaced all the wear parts, bearings, cables, fuel valve, hoses, etc., but left the engine to the professionals. It is somewhat scratched and faded, and I just cleaned it and left the original patina. One difference I noticed is that black trim piece on the front fender is chrome on mine. Can't say if it is original or not. These are not highway scooters. Mine tops out at around 60 mph GPS, but I don't ride it at full throttle for very long at the time. One tool you need on a vintage Vespa besides a pump is something to raise the rear wheel off the ground so you can change a flat on the rear. I made a small screw jack out of a piece of pipe, some threaded rod, nuts and washers that fits in the glovebox.

I don't understand this claiming SX 200 Lambretta needed constant maintenance i brought one at 3 years old with around 15,000 miles I had it for 2 years and sold for a new Honda K4 175 motorcycle in that time i did around 8,000 miles in that time I replaced 3 rear tires 1 front a set of front pads, rear brake shoes ( done by dealer the back wheel nearly fell off next day on way to Brands Hatch cos the wheel nuts were lose and they had distorted the brake drum and refused to fix the damage they did so i had to buy a new drum). It had an air filter replaced and I fitted a new seat as it was collapsing, and an exhaust rotted from salt. Before that I had a LI150 i rescued from scrapper. I fitted front suspension bushes 3 cables, a set off clutch plates, a set off tyres and a seat. that lasted 2 years with no other work. They were very reliable at least that was my experience between 1967 and 1972

Beautiful scooter! I have exactly the same color. 2012 mode. Recently bought a 300 and still keeping my S150 because it's so unique compared to other modern Vespa's 😊

No video on changing the rear nor do you sell any rear brakes on your website. Idk what to do I can’t find any brakes for my 2024 gts

Can you add this passenger backrest and gas tank surround but keep the original GT200 seat?

I have to say that I never thought a US channel would have the best videos for one of the best selling European scooter! I have a BV 350 and you are my go to Internet resource for everything. All your videos are well made, no BS, straight to action and keeping all the important small details which can make a difference in. This is how proper car/motorbike how-to videos should be made!

Shouldn’t it be Marine green 🫡

was up bot! nyc

Can you put up a video of taking OFF the windscreen?

I'm worried that if I leave a USB cable in a publicly accessible place, it will attract thieves. Do you have a version of the PP11 harness with an SAE connector? Alternatively, could I install the USB jack behind the kneecap, either in that little niche above the access panel, or dangling behind the glovebox with a USB cable plugged into it?

X cilindro 180 malossi e centralina il gioco valvole è uguale? For Malossi 180 cylinder and control unit, is the valve clearance the same? valve adjustment is the same

Thank you. Very useful! 😊

I had a GTS 250 about fifteen years ago. Definitely one of my favorite of the bikes I've owned over the years. I can't think of a smaller displacement motorcycle that's as comfortable for the passenger as the GTS. Two up riding all day long.

If it stays a bit more than the max? Is it worth draining? When idling it stays at max

I was thinking about service on my rally. Looking forward to more on the vintage scooters.

Wow! This is the way it should look!

How can I tell if a cylinder kit is too large for a 2015 Vespa Sprint? I'm considering buying a second-hand Vespa Sprint 50cc 2-stroke for about 2000 dollars and tuning it. However, I'm concerned about the rest of the engine-can it handle tuning, and how do I know when a kit is too much for the engine? Specifically, how do the 73cc and 83cc kits compare in performance? What about a 103cc kit-is that way too much for the Sprint 50cc 2-stroke? What exactly happens when a kit is too large for the engine-what parts typically fail or can’t handle the upgrade? Thanks for clear instructions-I feel inspired to start tuning!

Hey Robot, thank you for the video, if I dropped the back screw from the peg into the body, any suggestions on how I can get it back? it looks like it's not under the floorboard but somewhere under the body

it's better to use socket.

got the hi-flo Malossi filter in my BV350....also Malossi pipe and variator kit...................

Which side does the inner seal go in?

Hey gays

Wonderfull👍👍❤

Great video's thanks so much.i have a balance in the rpm idle especially when my Beverly 250 injection is cold or sometimes even if it's not ,the balance is from 1500 to 2000 rpm..i want to ask you please if its possible to have a problem with the throttle body because its dirty and needs to be cleaned!thanks again

Oh My god, all I need is this video in this Xmas 2024 ^^! Thank You , MR robot !

Thank you, from Australia 🙂 excellent tutorial

Is the 50cc / 45 mph or 45 kph ??

Thanks

Thank you, I forgot how to open the fob and didn't want to damage it. Your help is appreciated.

How much of a disadvantage is the old style front suspension? Would it be worth waiting for the 2025?

P125cc doing a 50,000km trip. Sounds like Vespa Motorsport didn't do much except all the normal valves, carb clean, brakes, belt, shocks checked....no motor stuff. That's a pretty hefty load, and there are mountains in the journey. What a joy that machine has been, and a credit to its builders.

I’d like to put a box on the rear seat in front of the top case it makes a scooter like a truck you can put so much stuff in there as well as a 40 lbs water jug

Looks nice with the rack it has a difficulty of “1” lol