We take a look at my new Veto Pro Pac Tech-LC toolbag and the items in it I carry for work
Пікірлер: 66
@matthewbarbour52616 жыл бұрын
Best review vid on KZbin hands down! Sound excellent! Picture quality excellent! Camera angle excellent! Finally a review video where you can actually understand whats being said & see all the details of the bag! Thank you so much for a great video
@a11ten0712 жыл бұрын
Been following you since you put out the staybrite8 vid, best decision I ever made.. Keep up the great work & many thanks!
@swarfrat31110 жыл бұрын
Greg, Thanks for the tour of your new tool bag. I've never tried the screwdrivers and nut drivers you have. I always used (and liked) Xcelite. I also used genuine Vice Grip locking pliers, as well as Channel Lock pliers. When I did in-house service, I had a mechanics tool chest. For field service, I used the suitcase-type tool kit with the pallets with the pockets on them for tools. There was space in the bottom for testing equipment (meters, etc.). I never had to climb ladders, but I think my right arm was stretched a few inches longer from toting about 35 lbs of tools around! My truck had a service body and I kept spare parts in bins in the compartments on the truck. The truck also had a water-proof camper shell so I could carry spare vacuum pumps and drive motors and keep them from the elements. After the trucks got tired, they switched to vans and that was great! There were metal bins on both sides and on the rear doors for spare parts, etc. I had plastic bins with motors, vacuum pumps, "octal" pin relays, power relays, contactors, motor starters, etc. Sorry to ramble on so much. Thanks for the video. Personally, I would be interested in a showdown between different brands of screwdrivers, nut drivers, etc. Have a good one. Dave
@Halligan14210 жыл бұрын
My Vice Grips live in my van. Sometimes you need them for that pesky stripped screw or nut, but not one of my regular use tools. I have a set of Xcelite precision screwdrivers and electronics pliers and strippers for electronics work. We are currently in the process of switching from Ford E-150 and 250's to most likely the new Dodge vans. They are much more square letting the bins sit flush against the van sides and I can pretty much stand up in it. Plus they are advertised with the dealer outfitted Sortimo bins and shelves. We are going to try one out first and see how it goes and hopefully when my van is done with it's life I'll get one.
@EminHVAC10 жыл бұрын
also if your interested look into the Bahco adjustable wrench 9072 they are slim enough to get to txv heads and they open up to 34mm. its an 8 in adjustable and opens as wide as a 12in
@not2fast4u2c10 жыл бұрын
That is a Nice bag ..The schrader pin tool was cool to see how it works
@billy991009 жыл бұрын
100 % guarantee that if you swith from your channel locks to knipex pump pliers aka channel locks you will not be disappointed.. they're self locking and made so you can't pinch your fingers hands down the best. I know people like what they like but knipex makes the best pump pliers
@nejatia87457 жыл бұрын
Bill Maria I have knipex alligators and they are solid
@sepomah6 жыл бұрын
No, he thinks they are useless...
@mikenormandy92503 жыл бұрын
You should check out the Knipex Pliers Wrenches to replace your Adj crescent wrenches. All sizes of the Pliers Wrenches open much wider then the equivalent adj wrench! For example, My 7" pliers wrench opens a full 1/2' wider then the 7" adj wrench I have....Great video!
@Bluecollarworkingman4 жыл бұрын
The fuel filter wrench thing was really cool.
@lukegodbout3 жыл бұрын
Love mine as a commercial electrician everything works as if it’s new after 3 years. Nothing broken. I even ran it over with my truck with my fluke in it and no thing broke and I’ll tools were good to go.
@Alex454ss709 жыл бұрын
Great video bro!! You Explained everything with great detail. 👍👍
@TheDpkustums2 жыл бұрын
I have a tech MC which is the size smaller than the techLC but had mine for year and a half and going strong but thinking of upgrading to the lc for a bit more room
@RobHVAC10 жыл бұрын
Nice video. I have been using Veto bags for years. My go to bag is the Tech-LC and I use it every day. Great bag.
@tekhelet7775 жыл бұрын
Just bought Knipex electrical tools. Great quality
@tonyyoung34374 жыл бұрын
Have just bought the XL, thinking that these bags will see us out !! Why shouldn't we have the best ??
@dirtmaop9 жыл бұрын
Thanks alot for the review! Great video and thanks for showing your tools. Always nice to see different tools and different reasonings for using such tools. Awesome video.
@KungFuMaintenance10 жыл бұрын
Good Vid! I definitely would like to see your videos on tool comparisons as well as all the HVAC vids you can throw at us! ~ Keep up the great work. I was interested in the comment you said you don't keep wire strippers in your bag. I have taken a lot of heat on videos where I did not use wire strippers but I have often felt more comfortable using my pliers and believed it more important to verify no wire strands were lost or the wire was not nicked. I guess you got me curious to hear your thoughts on wire strippers?
@Halligan14210 жыл бұрын
Wire strippers only go to 10 AWG so anything beyond that you are using line-mans or a knife so there's no real difference. Like you said you just have to be sure you don't cut strands off when doing it. Your not really cutting directly through anyway. Just scoring the jacket and pushing it off the same way wire strippers do.
@brister744 жыл бұрын
Fantastic review
@MrMultitool9 жыл бұрын
Really enjoyed the tour. I have the older LC and it has worked out pretty good.
@AllenAllen6748 жыл бұрын
very nice review thank you very much sir.
@mikgto683 жыл бұрын
hey i have a question.. will a hammer fit in the bag ? like a duct hammer? im a hvac tech and that bag looks like it will be perfect for me
@Halligan1423 жыл бұрын
Yeah it should May not fit vertically, but it should fit lengthwise across the bottom. It's ~13" long. There is a larger version of this bag also.
@SteveSam6610 жыл бұрын
Good Video, Thanks for sharing
@bricofast5 жыл бұрын
Great vídeo thanks, good bag.☺☺☺
@jimbola778 жыл бұрын
nice look's pricey but it's good for what u do u have a lot of knowledge as also being a machinist wow!!!!!
@robertw18713 жыл бұрын
This is our livelihood, $200-300 for quality is a bargain... I always buy the best stuff I can get, never once regretted it... I have regretted spending good money on garbage though...
@scrambler3507 жыл бұрын
Still using the Tech-LC...? I'm thinking of going up to the LC from my MC bag, only concern is the weight - MC currently tips the scales at ~28lbs fully loaded...the LC is almost double the weight of the MC empty - might have to use that shoulder strap.
@Halligan1427 жыл бұрын
Holding up fine. I broke the tape holder, but other than that it's good. Shoulder strap bags are the way to go especially climbing up and down ladders.
@willietierney53198 жыл бұрын
Get yourself a Knipex Pliers Wrench and you can lose 3 cresent wrench. Then maybe a Knipex Electrical Installation pliers. And lastly a set of Wera or Wiha multi bit screwdrivers . wera are more comfortable while Wiha have much better tips.
@sepomah6 жыл бұрын
willie tierney no he thinks the little grooves on the knipex pump pliers are useless..
@hanky9700710 жыл бұрын
I have the same bag and love it. Rarely use the shoulder strap though. Good review on bag and tools.
@Halligan14210 жыл бұрын
I need something I can sling on my shoulder for going up and down ladders. Especially those vertical ones.
@shatbandit56526 жыл бұрын
What size channel locks do u have ? I am looking at getting this bag but I have 12 inch channel locks wanna make sure they'll fit.
@stuckcontactor58265 жыл бұрын
Ian McVay they fit in my lc
@ivanl10504 жыл бұрын
What's the best waterproof bag?
@18436572smallblock3 жыл бұрын
That’s not how the warranty works at all. You call and send them a pic by text and without any cost send u a new bag to use while they fix yours.
@bloodsongsToolreviews2 жыл бұрын
2:07 it's Propaline
@EminHVAC10 жыл бұрын
hey brother if you purchase a veto bag you can fill out the promotional flyer and receive the TP3 for free. look on line for veto pac promional. also you should look into nylog for flarenuts and what not. they have the red and blue one and it works better then leaklock
@Halligan14210 жыл бұрын
Thanks for the info. I'll be sending that in next week.
@EminHVAC10 жыл бұрын
Just do it before July 31st
@Halligan14210 жыл бұрын
Emin HVAC Just came in the mail. Now to figure out what to put in it.
@EminHVAC10 жыл бұрын
***** nice
@EminHVAC10 жыл бұрын
***** u should just make a separate service pouch for a quick grab
@jimbola778 жыл бұрын
nice watch pop's old wrench very sentimental!!!!
@djnauseanyc10 жыл бұрын
i got the tech xl this bag is great but i wanted the back pack version way better
@nick91l744 жыл бұрын
So is it still in use?
@Halligan1424 жыл бұрын
Yes
@mariuskaizerman8 жыл бұрын
Is the Greenlee crimping too you have is the KP1022D ?
@Halligan1428 жыл бұрын
+Marius Kaizerman Yes it is
@mariuskaizerman8 жыл бұрын
+Halligan142 I'm looking to get such a tool for myself. After a year of usage, do you still prefer it over the Klein 1005? Thanks!
@Halligan1428 жыл бұрын
+Marius Kaizerman Yes I prefer it over Klein
@HMK-944 жыл бұрын
Can I fit 16oz hammer in there? 🤔
@jrend23923 жыл бұрын
It has a holster on the side
@GTOMEX1107 жыл бұрын
I don't justify the price for a bag with pockets for storing ants. I don't get what all the hype is all about the klien while it has its design flaws has better pockets where you can get the tools in and out much easier
@SkeletonManlover12510 жыл бұрын
More day in the life please
@bloodsongsToolreviews2 жыл бұрын
Again it's Propaline not cheap plastic
@bloodsongsToolreviews2 жыл бұрын
It's not alastic it's Neoprene
@math7qc8 жыл бұрын
Great Vid ! But GreenLee tool is make by Klein ...... :/
@Halligan1428 жыл бұрын
Klein is independent. Greenlee is owned by Textron.