VEVOR 1 Ton Arbor Press

[@DavidLucas-qm2zn]

I just got mine today. I was so fascinated at the construction that the cleanup was not even an issue! Tomorrow I plan on putting it to really good use.

[@flowerpt]

Cool, I have some riveting to do that I've been putting off because it's a pain in the ass to hold the material with just a hammer 'press'. Fair price.

[@janicewatson9771]

My son just bought me this press cos he couldn’t stand all the hammering for my leather work. I have to say this. Is the best piece of kit I’ve used in a long time. Most of my leather tools fit in the press so it’s a breeze to do the stitching holes, no matter how thick the leather is.

[@diegosalazar8531]

This is literally the reason I bought this. My wife could not stand my hammering

[@mattluszczak8095]

Jiujitsuing along son well done

[@MiscMitz]

That's cool. Thank you

[@farhadfadayi7389]

I've bought this machine. I use it to make bags. I love it. it is wonderful.

[@bisonuberti]

Excellent arbor press... I've been looking for an inexpensive one.

[@tedblackburn8679]

Nice , I have the same one. It's a 1 ton press. I use it for leather. For punching holes and setting snaps and rivets. Works great. Best price too. I highly recommend it. It has a 10mm hole that fits all my tools. Cheers from Canada.

[@Ensign_Cthulhu]

I wonder if you could use one of these things with a small-calibre, short-cartridge Lee Loader, to press the cartridge/projectile in rather than hammering it.

[@rheidtech]

I have an original from probably the 40s. Useful for some things. I also worked in the "tool room" for a couple years. 👍

[@MikeNBikes]

Appreciate the video, this is all I needed to move forward with buying one.

[@MichaelR58]

Good review, thanks for sharing, God bless brother !

[@dancevideo2]

You did not mention the two bolts in the top front, that either press against a gib strip, or bear directly on the geared rack (?). As you show the operation, the press appears to have a fair amount of slop sideways and/or forward and backward. If I was to snug up those bolts, how much slop is left? Is it a few mils or less, or is it a lot more than that? My thought was using it with a punch and die, but the two parts have to be accurately aligned to work.

[@josephshaff5194]

Beautiful Press ! OH! $47 currently ! Thanks for reviewing. Yeah, gettin' set up for some LeatherWorking Hobby. At least it comes with the Punches! Thanks for review that.

[@charlescurry811]

For 1 thing it's a 1 ton press 2:39 not 1/2 ton. I bought one and the ram is not square with the base.

[@nevinmarknarciso]

can it be locked when pressed down?, for glue purposes

[@gergoigaz9735]

No, you can't.

[@marcohermans3207]

Could you give me the dimensions for the hole in the ram? I want to use this for clamping a guitar fret press and the fret press caul has a diameter of 1cm. They doesn't give any dimensions at their website for this particular press. Thanks in advance

[@jasonjenkins7825]

The hole is supposedly 10mm, 12mm for the 2 and 3 ton version. I've got the machine and now waiting on the punches I bought that have 10mm shafts.

[@AutodidactEngineer]

Do they make a 10" version?

[@BBern636]

Any idea why the ram is moving forward and backward on me? It moves about 1/4” and I think it’s messing up my rivets and snaps. The ram won’t just go straight down. I tightened all four bolts.

[@danceswithjunk]

adjust the center bolt in the front that sets the back lash on the rack gears.

[@adiem1653]

Just bought it too

[@Rachelcenter1]

if you go to 8:27 of this video by Brothers Make (kzbin.info/www/bejne/jXvRh3SHptCXmbMsi=osucCfitsaLibqia&t=507) will this arbor press do the same thing as this video linked above? in other words if I'm trying to put hdpe plastic into a mold and flatten it like these guys, will this arbor press apply enough pressure to flatten it in a mold?

[@g.i.d.78]

I'm the 100th thumb 😁

[@jiujitsu2000]

Thank you!

[@teridacktaljones4553]

🥸