Vevor Auto Heat Press vs. HTVRont Auto Heat Press | Comparison and Review

[@MakingwithMarilyn]

I had wondered if the way the Vevor top plate comes down would cause shifting. Glad to know it does not.

[@craftabilities8805]

Your welcome

[@lynnebizlyne436]

Excellent review, very informative. I think I'll stay with a swing away but one that has a pull out drawer. They can adjust pressure without issue and you can swing the top out of the way or pull the tray out in front of you BUT there is the loss of having no auto open for the swing away machines. If I get to a point of needing the auto open you have sold me on the Vervor one. Thank you so much for sharing.😊

[@craftabilities8805]

Your Welcome!

[@cenaidarodriguez8070]

I got the HTVRONT Heat Press and I love it 😍 thank you for the review

[@craftabilities8805]

I like it to my main gripe is i wish it opened up a bit more!

[@jelenapaulic593]

Great review. I’m shopping around for my first heatpress. I’m going with the HTVRont. Your review helped me with my decision. Thank you. I need to find that pad and the Teflon

[@craftabilities8805]

Glad I could help!

[@JohnathonMudge]

What size pad should I be getting for the bottom? I get the 15"x15", but what thickness should I be getting

[@renesysval]

Excellent review, thanks for the comparison!

[@craftabilities8805]

Thanks for watching!

[@darlahpotechin1668]

I have a vevor coming and do have an htvront. The htvront sucks power and my lights flicker. I also have a slide drawer manual pressure 16x20. The 16x20 does not make my lights flicker. I see your lights do not flicker. Did notice many other people had the same issues and my power is updated. Wonder if the 1st batch that went out was faulty?

[@craftabilities8805]

I am not sure lets hope not

[@bonniebccanada5113]

I have the HTV Ront love it wouldn't want the Vevor don't care for the top raising do high nor the controls on separate module nor the control for raising and lowering it or the way the dial works for changing time and temp. To each their own 😊. Good video thank you for the comparison.

[@craftabilities8805]

I am now changing my tune a but on the Vevor, there is a lot of slippage causing me to press twice

[@lynntrucks-burton2320]

What mat did you purchase to replace the bottom mat on the htvront machine?

[@craftabilities8805]

You can get on amazon. Just look up silicone heat press mat. Double check you get the right size

[@WatisMcNeil]

Hello. To aid in slip/slide on your Velor press. Purchase minimum 4 of or packet of small removable wall hooks. Tape upside down to both sides bottom heat press. Attach loop closure to bottom side heating pad and secure to desired snugness. Should eliminate any slide/shift. Another quick fix is to get double sided strips or cut to length hook and loop. Use desired length ; one side to pad and connect side to base. Will help eliminate shift/slippage. #replayvelor;htvrontreview#diyquickfix🎉

[@craftabilities8805]

Thank you will try it out!

[@caileycocking3522]

Hello! Thanks for an awesome review, you've sold me on the HTVRont machine. I'd love to get the teflon sheet like you've got in the video that stays on the heat press. Where can I find it? Thanks!

[@craftabilities8805]

I placed a link in the description Also in the comment, remember to check your heat press plate size before purchasing Zhengmy 2 Pcs Wrap Cover for Heat Press Platen, 15 x 15 Inch Heat Resistant Reusable Sheets Pad Mat Pillow Protector for Sublimation Heat Pressing Machine brown and white a.co/d/3QnzFmi

[@twylasurratt616]

Thank you fir this comparison!

[@craftabilities8805]

My pleasure!

[@HicksGregary]

WOW the HTVRONT auto heat press looks really beautiful!!! really nice!

[@craftabilities8805]

Thank u

[@MsCree01]

Can you post if you find a Teflon cover for the Vevor. I have that one and almost ruined it because I keep forgetting the top cover

[@craftabilities8805]

When ever I see one I will definately post it

[@joannking6911]

Do you use heat pillows

[@craftabilities8805]

Its a silicone mat for heat presses

[@allainat666]

HTv Romt needs a 16x20 or 24 too

[@craftabilities8805]

🥸 I agree

[@allainat666]

Vector needs 16 x 20 or 24

[@TYJ419]

Great review guys! Tracey

[@craftabilities8805]

Thank u

[@CraftableThings]

Which one is the noisiest? Omg! I think that’s the HTVRont.

[@craftabilities8805]

You!

[@jessiegibson9023]

Good video thanks

[@craftabilities8805]

Glad you enjoyed it

[@TshirtChick]

You can gliue it down.

[@craftabilities8805]

I told Patrice that.

[@jessiegibson9023]

Good video thanks ❤

[@craftabilities8805]

Glad you enjoyed it

[@TshirtChick]

👀

[@craftabilities8805]

Hi